Independent comparisons. We may earn from shop links. Our editors compare products independently. Some links go to shops, and we may earn a commission. More info
Top pick: Harbour Housewares anthracite 14-sheet pack – Highest score at 7.4: classic corrugated wording, 4.6 from 51 reviews, and no clash on pre-drilled holes. Best value: Mondeer dark grey 14-sheet pack – About £53.99 with 4.5 from 257 reviews for a claimed 7 m². Screws are not included, and the sheet is still stated at 0.25 mm. Updated 22.10.2026.
Corrugated iron sheets are galvanised steel panels, wavy or trapezoidal, for sheds, lean-tos, kennels and bin stores. In the UK the usual retail pack is a short single-skin sheet, about 45–46 cm wide, rather than a cut-to-length trade sheet. A trade 13/3 roofing sheet is a different product: one UK seller of that profile recommends 0.7 mm for its own roofing sheet and treats 0.5 mm as cladding. Thickness, claimed face area, profile wording and whether the screws are in the box are the checks that still apply when the brand changes. Those checks are set out in the [corrugated iron sheets buying guide](/hub/diy-supplies/corrugated-iron-sheets/sub/corrugated-iron-sheets-buying-guide).
A square-metre figure is length times width times the sheet count, before any lap. Cover width is often not stated, so that figure is not the finished roof. Classic corrugated means a wavy sheet. A listing that also says trapezoidal is not a measured 13/3 pitch. Zinc weight is often missing, so galvanised is not a lifespan. A house roof is out of scope.
Corrugated iron sheets are galvanised steel panels, wavy or trapezoidal, for sheds, lean-tos, kennels and bin stores.
Corrugated iron sheets are galvanised steel panels, wavy or trapezoidal, for sheds, lean-tos, kennels and bin stores. In the UK the usual retail pack is a short single-skin sheet, about 45–46 cm wide, rather than a cut-to-length trade sheet. A trade 13/3 roofing sheet is a different product: one UK seller of that profile recommends 0.7 mm for its own roofing sheet and treats 0.5 mm as cladding. Thickness, claimed face area, profile wording and whether the screws are in the box are the checks that still apply when the brand changes. Those checks are set out in the [corrugated iron sheets buying guide](/hub/diy-supplies/corrugated-iron-sheets/sub/corrugated-iron-sheets-buying-guide).
A square-metre figure is length times width times the sheet count, before any lap. Cover width is often not stated, so that figure is not the finished roof. Classic corrugated means a wavy sheet. A listing that also says trapezoidal is not a measured 13/3 pitch. Zinc weight is often missing, so galvanised is not a lifespan. A house roof is out of scope.
Corrugated iron sheets are galvanised steel panels, wavy or trapezoidal, for sheds, lean-tos, kennels and bin stores. In the UK the usual retail pack is a short single-skin sheet, about 45–46 cm wide, rather than a cut-to-length trade sheet. A trade 13/3 roofing sheet is a different product: one UK seller of that profile recommends 0.7 mm for its own roofing sheet and treats 0.5 mm as cladding. Thickness, claimed face area, profile wording and whether the screws are in the box are the checks that still apply when the brand changes.
The Harbour Housewares anthracite pack is 14 galvanised sheets at 110 × 46 cm, stated 0.25 mm, for £57.99, with a claimed cover of up to 7 m² before laps. On amazon.co.uk the line is 4.6 from 51 ratings, and this is the listing in the set that says classic corrugated rather than trapezoidal as well. Reviews describe a shed roof, an outdoor kitchen and a rabbit run, and they mention bolts with seal washers, about 85 in one account, even though the bullets do not list screws. The listing says the sheets are not pre-drilled. One review says the screw heads strip, which matters if you drive them into a thin crest. Ridge caps are sold separately: the page says one pack of five caps fits one pack of 14 sheets. It is the top pick here for a small coloured corrugated skin with a consistent listing, not because 0.25 mm matches a trade 0.7 mm roofing sheet.
Pros
14 anthracite sheets, 110 × 46 cm, stated 0.25 mm, claimed up to 7 m²
Listing says classic corrugated and no pre-drilled holes
4.6 from 51 amazon.co.uk ratings
Reviews describe a shed, an outdoor kitchen and a rabbit run, and bolts with seal washers
Cons
Screws are not in the bullet list
One review says the screw heads strip
0.25 mm, and ridge caps are a separate pack
The same review text is repeated on the green listing
Best for: You want a dark corrugated skin for a small shed, shelter or animal run and you will buy seal screws yourself.
Less suitable: You need screws in the box, a stated 0.7 mm roofing sheet, or a review sample that is not shared with the green pack.
The green Harbour Housewares pack is listed at the same £57.99, the same 110 × 46 cm sheet, the same stated 0.25 mm and the same claimed cover of up to 7 m² as the anthracite listing. The model is HH-RB4967 rather than HH-RB4966. The title says a 14-pack, while the Number of Packs line says 2, and the listing does not explain the difference. The review text matches the anthracite listing, including 4.6 from 51 ratings, so those stars are not a separate test of the green colour. The listing says there are no pre-drilled holes. Ridge caps are sold separately, and the page says one pack of five caps fits one pack of 14 sheets. Choose green when the colour is the point and you accept that the written reviews are shared. Leave it if you need a star line that belongs only to this ASIN.
Pros
Green galvanised sheets at 110 × 46 cm, stated 0.25 mm
Same £57.99 shelf price as the anthracite pack
Listing says classic corrugated and no pre-drilled holes
Ridge caps are named as a separate pack
Cons
Review text is the same block as the anthracite listing
Title says 14 sheets and Number of Packs says 2
Screws are not in the bullets
0.25 mm, with no stated zinc weight
Best for: You want the green colour at the same stated size as the anthracite pack, and you will buy screws and a ridge yourself.
Less suitable: You are choosing on a review count that is independent of the anthracite pack, or you need one pack-count field.
Mondeer’s dark grey pack is 14 sheets at 110 × 46 cm and 0.25 mm for £53.99, with a claimed 7 m² and a packed weight of 15.2 kg. Across 257 amazon.co.uk ratings the line is 4.5, the largest sample in this comparison. Buyers often call the sheet thin, mention bent corners in the box, and still describe a shed or lean-to that was straightforward to fit once they supplied self-tapping roofing screws. Included components are the 14 sheets only. The bullets say there are no pre-drilled holes, while one review says the sheets were pre-drilled and that the description said so. One review says water still got into the shed. It is the best value here because £53.99 is the lowest price among packs with a real review count for a similar claimed area, not because the steel is thicker than the Harbour sheets.
Pros
£53.99 for 14 dark grey sheets and a claimed 7 m²
4.5 from 257 amazon.co.uk ratings
Reviewers fit them on sheds and lean-tos with their own screws
Packed weight stated at 15.2 kg
Cons
Screws are not in the included list
Bullets and one review disagree on pre-drilled holes
Thin sheet, bent corners, and one report of water in the shed
The listing uses both corrugated and trapezoidal
Best for: You want the lowest price in this set among packs with a large review count, and you already have roofing screws.
Less suitable: You need the screws in the box, one profile name, or a sheet the listing calls 0.5 mm or 0.7 mm.
Warmfay’s black pack is 24 sheets at 115 × 45 cm, stated 0.25 mm, for £73.99, and it is the only listing here that states 400 screws and washers in the box. The packed weight is 29 kg. The bullets claim 12.42 m² while the unit-count field says 11.88 m², so you should not treat one figure as the finished roof. On amazon.co.uk the line is 4.0 from 20 ratings. One review says the supplied screws were too small, and another reports rust spots on every panel after about 20 days. A later delivery did not match the first size and pattern, according to one review, while other buyers say the sheets were easy to fit once screwed down. The bullets do not promise pre-drilled holes, and one review says there were none. Buy it when the screw bag is the reason, and weigh the rust report before you treat 24 sheets as a saving.
Pros
24 black sheets with 400 screws and washers stated
Claimed area around 12 m² before laps
29 kg packed weight on the listing
Some reviewers found the sheets easy to screw down
Cons
4.0 from only 20 ratings
One review reports rust spots after about 20 days
One review says the screws were too small
12.42 m² and 11.88 m² both appear on the listing
Best for: You want a 24-sheet black pack with fixings named in the box, and you will check those screws on one crest before you fix the whole roof.
Less suitable: You want a large review sample, a single area figure, or a coating you can treat as proven against early rust.
Yes. The listing states 400 screws and washers. One review says those screws were too small.
What area is claimed?
The bullets say 12.42 m². The unit-count field says 11.88 square metres. Both figures are on the listing.
What went wrong in reviews?
One review reports rust spots on every panel after about 20 days. Another says a later delivery did not match the first size and pattern. Others say the sheets were easy to fit once screwed down.
The TEOV 24-sheet listing is £67.75 for black panels at the same stated 115 × 45 cm and the same part number C150 as the 12-sheet pack, with the same image URL. The listing claims 12.42 m², which is the 12-sheet claim doubled, again before laps. The bullets say 0.25 mm and the item dimensions again begin 25 × 450 × 1150 mm. Weight is not given. Screws are not listed in the box, and pre-drilled holes are not stated. There is no customer-review line and no review text on the listing. A larger pack at a lower price per claimed square metre is still an unreviewed listing, so it does not outrank the packs that buyers have actually fitted. The material line says galvanised steel in the bullets and zinc plating in the material field.
Pros
24 black sheets and a claimed 12.42 m² before laps
£67.75, lower per claimed square metre than the 12-sheet TEOV pack
Sheet size stated as 115 × 45 cm
Cons
No customer reviews on the listing
0.25 mm in the bullets and a 25 mm dimension row
Screws are not listed in the box
Same part number C150 and the same image as the 12-sheet listing
Best for: You are pricing a larger black patch and you will inspect the sheets on arrival because this listing has no reviews.
Less suitable: You want a star line, screws in the box, or a thickness row that agrees with itself.
The TEOV 12-sheet listing is black panels at 115 × 45 cm for £39.89, with a claimed 6.21 m² that matches the stated size times 12 before any lap. The bullets say 0.25 mm, while the item dimensions begin 25 × 450 × 1150 mm, and the listing does not reconcile those figures. Screws are not listed as included, even though the bullets tell you to secure the sheets with screws. The profile is described as trapezoidal grooves and also as corrugated. Part number C150 and the manufacturer field meiyitian also appear on the 24-sheet TEOV listing, which uses the same image URL. This listing has no customer-review line and no review text, so there is no star score beside the £39.89 price. It is the lowest shelf price in the set, and that is not evidence the sheet will stay flat or keep its colour.
Pros
£39.89 for 12 black sheets and a claimed 6.21 m²
Sheet size stated as 115 × 45 cm
Bullets name galvanised steel
Cons
No customer reviews on the listing
0.25 mm in the bullets and a 25 mm dimension row
Screws are not listed in the box
Same part number C150 as the 24-sheet listing
Best for: You are pricing a small black patch and you will check the steel when it arrives, because this listing has no reviews.
Less suitable: You want a star line, screws in the box, or one thickness figure you can quote.
The listing says 12 panels cover 6.21 m². That matches the stated sheet size times the count, before laps.
Are screws included?
The bullets say to secure the sheets with screws. They do not say the screws are in the box.
What do buyers say?
This listing has no customer-review line and no review text.
How we compared
Shelf prices, stars and review counts are the amazon.co.uk figures already stored for these six listings. This is not a laboratory test, and there is no snow-load or zinc-weight measurement. Every pack states 0.25 mm, so thickness does not separate them. The score is 0–100 from four parts, and the figure shown beside each pack is that score divided by 10. The highest score is the top pick, once. Best value is the strongest value part among the other listings, once. A copied review block does not count as a second sample.
1
Stars
35%
Amazon stars scaled to 35 points. No rating line scores 0. The green Harbour pack keeps its printed stars in the table, but a copied review block does not earn a second sample.
2
Review sample
25%
A sample of 100–999 reviews scores higher than 30–99, which scores higher than 10–29. No review line scores 0. The green pack’s copied block scores 0 on this part.
3
Spec honesty
25%
Classic corrugated wording scores above a listing that says corrugated and trapezoidal together. A 25 mm row beside 0.25 mm scores lower. Screws named in the box score above fixings that appear only in reviews. A clash on holes, pack count or area scores 0 on consistency, and a rust-in-weeks review is a deduction.
4
Value
15%
Among listings with 30 or more reviews, a lower price per claimed face square metre scores higher. Screws are not added into that sum. A rust-in-weeks review caps this part. No review line stays on the low unreviewed band. Best value is this part, and it is not the top pick.
Independent review
Last updated: 22.10.2026
9 sources checked
Corrugated iron sheets buying guide
Buy the gauge and the real cover before the colour. A corrugated iron sheet for a UK shed or lean-to is a short galvanised panel, wavy or trapezoidal, and the retail packs state 0.25 mm. That is not a trade 13/3 sheet at 0.5 mm or 0.7 mm. Check whether screws and a ridge are in the box, and do not treat the title square metres as cover after laps.
What is a corrugated iron sheet?
A corrugated iron sheet, in the way UK shoppers use the phrase, is a galvanised steel panel with a wavy or trapezoidal profile. People buy it for sheds, lean-tos, kennels and bin stores. The short retail packs are about 45–46 cm wide and about 110–115 cm long. They are single-skin sheet, with no stated anti-condensation fleece, and they are not cut-to-length trade sheets. The thin retail packs state 0.25 mm. Trade 13/3 is a different buy.
Best for
A shed, lean-to, kennel or bin store where a thin coloured skin is enough
A buyer who will supply seal screws and will not treat the title area as cover after laps
Not ideal for
A house roof, or a trade 13/3 sheet at 0.5 mm or 0.7 mm
Anyone who needs a zinc weight, a Declaration of Performance, or purlin spacing on the listing
Mistakes to avoid
1
Reading square metres as finished cover
A claim near 7 m² or 12.42 m² is length times width times the sheet count. Laps use some of that face. Cover width is not stated, so the title figure is not the finished roof.
2
Assuming the screws are in the box
Only Warmfay states 400 screws and washers. Harbour reviews mention bolts the bullets omit. Mondeer and TEOV do not list screws as included. Harbour ridge caps are a separate pack.
3
Treating a thin coloured pack as trade sheet
Every pack here states 0.25 mm. Two TEOV listings also print a 25 mm dimension. A galvanised line is not a zinc weight, a lifespan or a snow load. Plastic and board sold as corrugated iron are a different product.
What to weigh up
Thickness, area and profile
High
These packs are 0.25 mm. Trade 13/3 is a different buy: one UK seller recommends 0.7 mm for its own roofing sheet and treats 0.5 mm as cladding. Face claims near 7 m² or 12.42 m² match length times width times count, before laps. Cover width is not stated. Harbour says classic corrugated. Mondeer, TEOV and Warmfay say corrugated and trapezoidal. That is not a measured 13/3 pitch. Warmfay also prints 11.88 m² beside 12.42 m².
Fixings, coating and price
High
Only Warmfay states 400 screws and washers, at about £73.99, with 4.0 from 20 reviews and one report of rust spots after about 20 days. Harbour reviews mention bolts the bullets omit, and ridge caps are separate. Mondeer and TEOV do not list screws. Colours are anthracite, green, dark grey or black. Zinc weight is not stated. On the stored amazon.co.uk prices, about £39.89 to £57.99 is the 12- and 14-sheet band, and about £67.75 to £73.99 is the 24-sheet band.
Which option suits you?
Three typical situations, each with a recommendation from this comparison.
🏠
Small shed or animal run
You want a dark wavy skin for a shed, shelter or run, and you will buy seal screws. The Harbour Housewares anthracite pack is the top pick at about £57.99. It scores 7.4: classic corrugated wording, 110 × 46 cm, stated 0.25 mm, claimed up to 7 m², and 4.6 from 51 reviews. The listing says the sheets are not pre-drilled. It is not a 0.7 mm trade sheet.
You want the lowest price among packs with a large review count for a similar claimed area. The Mondeer dark grey pack is best value at about £53.99. It scores 7.3, with a claimed 7 m² and 4.5 from 257 reviews. Screws are not included. Buyers mention a thin sheet and bent corners. The profile line says both corrugated and trapezoidal.
You want the fixings written into the included list. The Warmfay black 24-sheet pack at about £73.99 states 400 screws and washers, with a packed weight of 29 kg and 4.0 from 20 reviews. One review says the screws were too small, and one reports rust spots after about 20 days. The listing prints both 12.42 m² and 11.88 m².
Which corrugated iron sheets are the top pick in 2026?
The top pick is the Harbour Housewares anthracite 14-sheet pack at about £57.99. It scores 7.4. The listing says classic corrugated, 110 × 46 cm, stated 0.25 mm, and a claimed cover of up to 7 m², with 4.6 from 51 amazon.co.uk ratings. It says the sheets are not pre-drilled. Screws are not in the bullet list, though reviews mention bolts with seal washers. This is a thin coloured skin, not a 0.7 mm trade roofing sheet.
Which corrugated iron sheet pack is best value?
Best value is the Mondeer dark grey 14-sheet pack at about £53.99. It scores 7.3, with a claimed 7 m² and 4.5 from 257 ratings, the largest review sample here. Included components are the 14 sheets. Buyers often call the sheet thin, mention bent corners, and still describe a shed or lean-to once they supplied their own screws. The bullets say there are no pre-drilled holes, and one review says the opposite.
How much do corrugated iron sheets cost on amazon.co.uk?
On the stored amazon.co.uk prices, the six packs run from about £39.89 to about £73.99. About £39.89 to £57.99 covers the 12- and 14-sheet packs. About £67.75 to £73.99 covers the 24-sheet packs. That step is quantity, not a heavier coating. Price divided by the claimed face area is a rough band of about £5.45 to £8.28 per m² before laps. A trade 13/3 list price is a different seller, not an amazon.co.uk price.
Is 0.25 mm the same as a trade roofing sheet?
No. Every pack here states 0.25 mm. A UK 13/3 seller recommends 0.7 mm for its own roofing sheet and treats 0.5 mm as cladding. Two black listings also print a 25 mm dimension beside 0.25 mm, and the listing does not reconcile those figures. These listings do not cite BS EN 14782. Do not treat 0.25 mm, or a galvanised bullet, as a snow load, a zinc weight or a lifespan.
Are the screws included with corrugated iron sheets?
Only the Warmfay 24-sheet pack states 400 screws and washers in the box, at about £73.99. One review says those screws were too small. Harbour bullets do not list screws, while reviews mention bolts with seal washers. Mondeer and both TEOV packs do not list screws as included. Harbour also sells ridge caps separately: one pack of five caps is said to fit one pack of 14 sheets. Buy seal screws unless the listing names them.
Can these corrugated iron sheets go on a house, and what about planning?
Do not use this set on a house. In England, Planning Portal’s summary of Class E keeps an outbuilding off the front elevation. Eaves are 2.5 m. Overall height is 4 m for a dual pitch, otherwise 3 m, and 2.5 m within 2 m of a boundary. Building regulations normally skip a detached outbuilding under 15 m² with no sleeping. Other UK nations differ. A high roof, a rotten frame or any doubt about Class E needs a professional.
Are plastic or board sheets the same as corrugated iron?
No. These packs are galvanised steel. Cardboard, fluted plastic and a styrene model sheet are a different product, even if the title says corrugated. That separate buy is the corrugated sheets comparison. On steel, read the profile words. Classic corrugated is wavy. A listing that also says trapezoidal is not a measured 13/3 pitch. Box profile is the trapezoidal alternative, and it is not priced in this table.
What are the safety limits with corrugated iron sheets?
Treat the roof as fragile until you know it is not. Corroded metal and fibre-cement, including asbestos cement on old sheds, are the hazard. Do not walk the sheets. Cut on the ground and clear swarf off the face. Protect eyes and hands, and keep gloves off machines that can catch them. If the frame is rotten, the span is long, or you suspect asbestos cement, stop and call a professional.
Our verdict
The top pick is the Harbour Housewares anthracite 14-sheet pack at about £57.99. It scores 7.4, the highest here: classic corrugated wording, 4.6 from 51 reviews, and a listing that says the sheets are not pre-drilled. Screws are not in the bullets. Best value is the Mondeer dark grey 14-sheet pack at about £53.99. It scores 7.3, with 4.5 from 257 reviews and a claimed 7 m². The screws are not included, and the stated thickness is still 0.25 mm. Warmfay at about £73.99 is the only pack that states 400 screws, with 4.0 from 20 reviews and one rust-in-weeks report. The two TEOV packs have no review line on the listing.
Best overall
Harbour Housewares anthracite 14-sheet pack
Highest score at 7.4: classic corrugated wording, 4.6 from 51 reviews, and no clash on pre-drilled holes.
Peter F. is the editor for DIY & tools at productscompared.co.uk. Comparisons in this category are checked against amazon.co.uk listings, review evidence and public UK sources.
Updated: 22.10.2026
9 sources checked
Guides to corrugated iron sheets
Guides on what to look for, how to use a product, and common mistakes.
This page contains affiliate links to amazon.co.uk (tag pcuk26-21). If you buy through them, we may earn a commission at no extra cost to you. Prices, stars and review counts are the amazon.co.uk figures already stored for this set. This is not a laboratory test.