Independent comparisons. We may earn from shop links. Our editors compare products independently. Some links go to shops, and we may earn a commission. More info
Top pick: Floor Nation 4 mm sheets, pack of 2 Best value: Mondeer 14 dark grey roofing sheets – About £53.99 with 4.5 from 257 ratings, the deepest steel sample here, still 0.25 mm and without a ridge in the box. Updated 22.10.2026.
Corrugated sheets are wavy boards sold for one job. For a shed, kennel or lean-to you buy short galvanised or coated steel panels. For a decorating floor or an outdoor sign you buy fluted polypropylene. For posting prints and light craft you buy kraft cardboard pads, or a single-face paper roll when you need a wrap. Pick the job first. A mailing pad will not roof a shed, and a steel panel is a poor stiffener for a parcel.
You recognise a suitable sheet by thickness, size and fixing. UK trade guides treat 0.5 mm as a common shed gauge and 0.7 mm when the span or the exposure increases. The square metres in a title are gross area: side laps and an end lap cut the cover, and a ridge is often sold separately. Crest fixing is usual on sinusoidal steel. Some trapezoidal profiles fix in the trough. Cardboard is judged by flute height, from about 1.5 mm to about 4 mm, not by the word thick. Those checks are set out in the [corrugated sheets buying guide](/hub/diy-supplies/corrugated-sheets/sub/corrugated-sheets-buying-guide).
Corrugated sheets are wavy boards sold for one job. For a shed, kennel or lean-to you buy short galvanised or coated steel panels. For a decorating floor or an outdoor sign you buy fluted polypropylene.
Corrugated sheets are wavy boards sold for one job. For a shed, kennel or lean-to you buy short galvanised or coated steel panels. For a decorating floor or an outdoor sign you buy fluted polypropylene. For posting prints and light craft you buy kraft cardboard pads, or a single-face paper roll when you need a wrap. Pick the job first. A mailing pad will not roof a shed, and a steel panel is a poor stiffener for a parcel.
You recognise a suitable sheet by thickness, size and fixing. UK trade guides treat 0.5 mm as a common shed gauge and 0.7 mm when the span or the exposure increases. The square metres in a title are gross area: side laps and an end lap cut the cover, and a ridge is often sold separately. Crest fixing is usual on sinusoidal steel. Some trapezoidal profiles fix in the trough. Cardboard is judged by flute height, from about 1.5 mm to about 4 mm, not by the word thick. Those checks are set out in the [corrugated sheets buying guide](/hub/diy-supplies/corrugated-sheets/sub/corrugated-sheets-buying-guide).
Corrugated sheets are wavy boards sold for one job. For a shed, kennel or lean-to you buy short galvanised or coated steel panels. For a decorating floor or an outdoor sign you buy fluted polypropylene. For posting prints and light craft you buy kraft cardboard pads, or a single-face paper roll when you need a wrap. Pick the job first. A mailing pad will not roof a shed, and a steel panel is a poor stiffener for a parcel. You recognise a suitable sheet by thickness, size and fixing. UK trade guides treat 0.5 mm as a common shed gauge and 0.7 mm when the span or the exposure increases.
Floor Nation lists two black corrugated polypropylene sheets at 2.4 x 1.2 m and 4 mm for £34.95, about 2.88 m² each, with a stated item weight of 2 kg. The amazon.co.uk line is 5.0 from 3 ratings, and those three short reviews say the sheet is stiffer than a flimsy dust sheet and did the protection job, with no concrete complaint written down. Packs of one to four sheets are delivered rolled, so a two-sheet order arrives as a roll you have to flatten, not as a rigid board. The listing is temporary floor and surface protection during decorating, and it is thicker than the brand's 2 mm sheets in the seller's words. It does not mention LPS 1207, so you should not treat it as flame-retardant protection sheet. It is not a metal roof panel, and three ratings are too few to lead a set that also contains shed packs.
Pros
Full-size 2.4 x 1.2 m sheets at a stated 4 mm
Corrugated polypropylene, sold for temporary floor protection
Two sheets at £34.95, about 2.88 m² each
Reviewers found it stiffer than a thin dust sheet
Cons
Only 3 ratings, all short and positive
Packs of 1 to 4 sheets are delivered rolled
No LPS 1207 line on the listing
Not a galvanised roof sheet
Best for: A decorating floor where you want a 4 mm fluted plastic sheet at trade size and can flatten a rolled delivery.
Less suitable: A shed roof, an outdoor sign that needs a smooth writing face, or anyone who needs a flame-test claim.
The Harbour Housewares anthracite 14-pack lists at £57.99, 110 x 46 cm, stated 0.25 mm and about 16 kg, with a claimed cover of up to 7 m². The amazon.co.uk line is 4.6 from 51 ratings, and the same review text sits on the green colour listing, so you should not add the two counts. Reviewers used the panels on a shed, a rabbit run and an outdoor kitchen, and they call the sheets light yet usable once drilled and fixed. The listing says the sheets arrive without pre-drilled holes, and ridge caps are sold separately, with one pack of five caps said to fit one 14-sheet pack. One review mentions about 85 bolts with seal washers, then says the metal screw heads strip, so that buyer switched to decking screws and kept the washers. Dents, bends and scratches appear when the panels are handled roughly, and one buyer found the length shorter than expected. It is the top pick among these coloured 14-packs when you want the higher star line and can live with a 51-review sample and a separate ridge.
Pros
4.6 from 51 ratings, the highest star line on a steel pack here
110 x 46 cm anthracite panels at a stated 0.25 mm and 16 kg
Reviewers fitted a shed, a rabbit run and an outdoor kitchen
Listing points to a separate five-cap ridge pack for one 14-sheet pack
Cons
The 51-review text is shared with the green listing
Supplied screw heads strip in that shared review
Ridge caps are not in the box
Panels dent and scratch if you handle them roughly
Best for: A small coloured shed or animal run when you accept 0.25 mm, will drill your own holes, and will buy the ridge separately.
Less suitable: Anyone who needs an independent second review sample, a ridge in the carton, or a trade 0.5 mm sheet.
The green Harbour 14-pack lists at the same £57.99, the same 110 x 46 cm size and the same stated 0.25 mm as the anthracite pack, at 16 kg with up to 7 m² claimed. The listing shows 4.6 from 51 and the same review text, so this is a colour choice, not a second independent sample. Dents, scratches and stripped screw heads are the complaints on that shared text, and one buyer found the sheets shorter than expected. The details block lists number of packs as 2 and number of items as 1, which does not match the 14-sheet title, so treat the box as one 14-pack until the live page says otherwise. Ridge caps are sold separately, and the listing says the sheets are supplied without pre-drilled holes. Choose green when the colour is the point and you already accept the anthracite limits. It does not take a second pick, because the evidence is the same pool.
Pros
Same stated size and 0.25 mm gauge as the anthracite 14-pack
£57.99, with green as the visible difference
Shared reviews cover shed, run and outdoor-kitchen use
Listing says holes are not pre-drilled, so you place them
Cons
Review text matches the anthracite listing, so the 51 is not a new sample
Pack-count fields disagree with the 14-sheet title
Shared complaints include stripped screws and dents
Ridge caps sold separately
Best for: The same small shed job as the anthracite pack when you want green and will not double-count the reviews.
Less suitable: Shoppers who think two colour listings mean 102 independent ratings, or who need a ridge in the box.
The yuejuhe 20-pack of brown A4 kraft sheets lists at £9.95, stated 29.7 x 21 cm and 1.8 mm, with 4.5 from 589 ratings, the largest cardboard sample in this set. Reviewers cut them with a craft knife for drawer bases, a flower press, school models and posted A4 prints, and they like that the size matches A4. The same reviews often say the board is thinner and less rigid than the photos, including one measurement of 1.0 mm against the 1.8 mm line. Slight buckle and corner dents from the packaging come up as well. The listing describes two kraft layers with one corrugated layer between, which is single-wall territory rather than a double-wall print mailer. It is the sensible light pad when you want volume and a deep review count for craft and ordinary parcels. It is the wrong sheet when a print must stay flat on its own.
Pros
£9.95 for 20 A4 sheets
4.5 from 589 amazon.co.uk ratings
Size matches A4, so less trimming for a standard print sleeve
Reviewers cut it cleanly for drawers, a flower press and parcels
Cons
Reviewers say it is thinner than the stated 1.8 mm, one measuring 1.0 mm
Less rigid than buyers expected for art prints
Slight buckle and corner dents on arrival
Single-wall kraft, not a double-wall mailer
Best for: Craft, drawer bases and light A4 parcels when a deep review count matters more than print-mailer stiffness.
Less suitable: A print or photograph that needs the pad as its only stiffener, a wet floor, or a roof.
The Mondeer 14-pack lists at £53.99 on amazon.co.uk, with 4.5 from 257 ratings, the deepest review sample among the steel packs here. Each panel is stated at 110 x 46 cm and 0.25 mm, and the unit count claims 7 m² for the 14 sheets at 15.2 kg. UK reviewers fitted them to shed roofs, a fence and a lean-to, and several say the finish looks better than felt, though more than one also calls the sheet the thinnest they have used and flimsy until it is screwed down. Corners arrived bent on every panel in one delivery, and factory scratches show up in another. The included-components line is 14 roofing sheets only, and a reviewer could not find a matching ridge from the brand. Bullets say there are no pre-drilled holes, while one UK review says the sheets were pre-drilled. It is the best value steel pack in this set on price and review count, if you accept 0.25 mm and buy a ridge elsewhere.
Pros
£53.99 for 14 panels, the lowest steel price in this set
4.5 from 257 amazon.co.uk ratings
110 x 46 cm sheets that reviewers handled on sheds, a fence and a lean-to
Stated galvanised steel at 15.2 kg for the pack
Cons
Stated 0.25 mm, which reviewers call thin and flimsy until fixed
Bent corners and forming scratches in more than one delivery
No ridge in the included-components line
Bullets and one review disagree on pre-drilled holes
Best for: A small shed, kennel or fence where you want the largest UK review sample at £53.99 and can source a ridge separately.
Less suitable: A span that UK trade guides would sheet in 0.5 mm or 0.7 mm, or a roof that needs a matching ridge in the same box.
The YOFANNER listing is a single-face paper roll, stated at 5.21 x 0.31 m and 531 g, for £11.99. It bends around shapes, so it is a wrap rather than a stack of flat pads. The amazon.co.uk line is 4.5 from 6 ratings, and the stored reviews are from Canada and the United States, not the United Kingdom, so you should not treat that score as a UK sample. A US review praises even flutes and use as a barrier in boxes. A review from Canada says the roll arrived as four shorter pieces, not one continuous length. Thickness is not stated. Use it when you need a wavy paper wrap for craft or packing curves. Do not buy it to stiffen an A4 print.
Pros
A single-face roll that bends around curves
Stated size 5.21 x 0.31 m at £11.99
Light at 531 g for wrapping and craft
A US review describes even flutes and use as a box barrier
Cons
The six ratings on the listing are not UK reviews
A Canada review received four shorter pieces, not one length
No stated thickness
Not a flat rigid pad for a print
Best for: Wrapping an awkward shape or lining a box when a flat A4 pad would fight the curve.
Less suitable: Posting a flat print, a floor, a sign, or a roof, and anyone who needs a UK review sample.
MUKCHAP lists 40 brown A4 sheets at a stated 297 x 210 x 3 mm for £13.59, 1.4 kg, with 4.3 from 6 ratings. Only two of those reviews are from the UK. One buyer built an advent calendar that held heavier items, and another used the sheets as extra protection on eBay parcels. That second review says the cuts were not always square, and the price felt high for the quality received. The title claims a three-layer corrugated pad, so the stated thickness sits nearer a B-flute band than the yuejuhe 1.8 mm line, but six ratings cannot prove the board is actually 3 mm. You get twice the sheet count of the 20-pack for £13.59. Buy it when you need more A4 pads and can check the edges, not when you need a large review sample.
Pros
40 A4 sheets, twice the count of the 20-pack
Title states 3 mm and a three-layer structure
One UK review used them to hold heavier advent-calendar items
£13.59, so the price per sheet is low if the cut is acceptable
Cons
Only 6 ratings, and only two of them are from the UK
Cuts were not always square in one UK review
That reviewer thought the price was high for the quality
Stated 3 mm is not confirmed by a reviewer measurement
Best for: A stack of A4 pads for parcels and craft when you will check that the edges are square.
Less suitable: A print mailer you must trust from the title thickness, or a job that needs hundreds of UK reviews.
NBEADS lists ten white fluted sheets at about 40.2 x 30.2 cm for £15.99, 870 g, with 4.2 from 31 ratings. The bullets say 0.4 cm thick, while the item-thickness field prints 32.5 cm, which matches the package width rather than the sheet. Reviewers used them as temporary sign backing and for bag stiffening, and they found the sheets light and easy to cut. One buyer wanted a smooth writing surface and did not get one. Packaging dented sheets in one delivery, leaving two unusable. The material line says plastic, one bullet says corrugated cardboard, and a review from Sweden says cardboard arrived instead of plastic. They are small craft and sign boards, not a 1.2 x 2.4 m floor sheet and not a roof.
Pros
Ten sheets at about 40.2 x 30.2 cm for £15.99
Bullets state 4 mm fluted plastic
4.2 from 31 ratings, used as sign backing and bag stiffeners
Light enough to cut for craft at 870 g for the pack
Cons
Item-thickness field of 32.5 cm does not describe the sheet
Surface was not smooth enough to write on in one review
Transit dents made two sheets unusable in one delivery
One bullet says cardboard, and one review received cardboard
Best for: Temporary yard-sign backing or small craft panels when you can check that plastic, not card, is in the parcel.
Less suitable: A wet floor at 1.2 x 2.4 m, a hand-lettered sign that needs a smooth face, or any roof.
Warmfay's black 24-pack lists at £73.99, with panels stated at 115 x 45 cm and 0.25 mm, and a pack weight of 29 kg. The title claims 12.42 m² while the unit count says 11.88 m², so the cover figure is already inconsistent before you allow for laps. Across 4.0 from 20 ratings, reviewers fitted a shed and a garage and found the sheets easy to cut, and one said they held in storms once fixed. The title claims 400 screws and washers, yet one reviewer said the supplied screws were too small to use, and another said the sheets were not pre-drilled, which stopped a solo fit. One review reports tiny rust spots on every panel after about 20 days, which other reviews do not repeat. A later order differed in size and design, and one box arrived smashed at a corner. It is the largest steel count in the set, not the pick, because the star line, the screw complaints and the rust note sit under a higher price.
Pros
24 panels, the highest sheet count among the steel packs
115 x 45 cm black galvanised sheet at a stated 0.25 mm
Title claims 400 screws and washers in the box
Reviewers cut the sheets and fitted a shed and a garage
Cons
4.0 from 20 ratings, below the 14-packs
One reviewer found the supplied screws too small
One review reports rust spots after about 20 days
Title area 12.42 m² disagrees with the 11.88 m² unit count
Best for: A larger black cover when you already own decent roofing screws and can check the panels for early rust.
Less suitable: A first shed roof if you were counting on the kit screws, or anyone treating the title square metres as finished cover.
LUKDNEEY lists ten brown sheets at 42 x 30 cm for £9.99, and the title calls the pack A3. The specification table does not print a thickness, while both UK reviews say about 3 mm. The star line is 3.0 from 2 ratings, and both of those reviews say the board is too flexible to be the only backing for a print in the post. They do find it easy to cut for craft, signs and models, and useful as light extra padding. The listing claims some moisture resistance from a surface coating, which the reviews do not confirm as a waterproof board. At 1.13 kg for ten sheets the pack is heavier than the yuejuhe 20-pack's 580 g, which does not by itself make it stiffer. It is a small craft pad with a weak sample, not a print mailer.
Pros
Ten sheets at 42 x 30 cm for £9.99
Both UK reviews found them easy to cut for craft and models
Useful as light extra padding beside a stronger board
Plain brown finish for mixed craft
Cons
3.0 from only 2 ratings
Both reviews say it is too flexible as the sole backing for a print
Thickness is missing from the specification table
A moisture-resistant coating is claimed and not confirmed in the reviews
Best for: Light craft, signs and extra padding when you already have a stiffer board for anything posted flat.
Less suitable: Posting a print or photograph with this sheet as the only stiffener.
WOPPLXY lists 60 kraft squares at 30 x 30 cm and a stated 3 mm for £22.99, with a pack weight of 1.8 kg. The listing has no Customer Reviews line, so there is no star rating and no UK text to check the thickness or the cut. The seller names poster backing, mailing vinyl and prints, and craft, and says the sheet can be cut. A 30 cm square is neither A4 nor A3, so you will trim or overlap if the job is a standard print. Triple-layer kraft is claimed, which would sit near the 3 mm titles elsewhere, but that remains a listing line. At £22.99 you are paying for count and size with no review evidence on the listing. Leave it until the live page shows ratings, unless you specifically need 30 cm squares.
Pros
60 sheets, the largest cardboard count in the set
30 x 30 cm squares at a stated 3 mm
Seller names poster backing, vinyl mailing and craft
1.8 kg pack, so the count is the point of the price
Cons
No Customer Reviews line, so stars and complaints are unknown
30 cm square is not A4 or A3
Stated 3 mm has no reviewer measurement
£22.99 without a rating to compare with the A4 packs
Best for: A craft job that specifically needs 30 cm kraft squares and can wait on an unrated listing.
Less suitable: Anyone who wants a reviewed A4 pad, a measured thickness, or a roof or floor sheet.
The listing has no Customer Reviews line, so the score and the count are unknown.
What size is each sheet?
The listing says 30 x 30 cm and 3 mm.
What job does the seller name?
Poster backing, mailing vinyl and prints, and craft. There are no reviews to check that.
How we compared
Shelf prices and stars are the amazon.co.uk figures already stored for these eleven listings, with a score note dated 20 October 2026. This is not a laboratory test, not a BS EN 14782 approval and not a flame test. The score uses the star line and the review count, then a cut for a missing rating line, a non-UK review sample, a shared review pool, a listing conflict, or a three-review floor sheet. The highest score is not the top pick. Best value is a different listing.
1
Job and material
30%
Roof or cladding, floor protection, a sign, and a dry pad are different jobs. A floor sheet can score high and still not lead a set that includes shed packs.
2
Thickness and cover
25%
Stated gauge is checked against 0.5 mm and 0.7 mm trade notes for single-skin steel, and against flute height for card. Gross square metres are not finished cover.
3
Review evidence
25%
Stars and review count, then a cut for no rating line, reviews that are not from the UK, one text shared by two colours, a listing conflict, or only three reviews.
4
Fixings and price
20%
A ridge or usable screws in the box, and the price for that job. The value award is not the same listing as the top pick.
Independent review
Last updated: 22.10.2026
8 sources checked
Corrugated sheets buying guide
Buy the job before the pack. Corrugated sheets on amazon.co.uk are short steel roof panels, fluted polypropylene, or kraft pads and a single-face roll, and they are not substitutes. Steel in this set is stated at 0.25 mm, below the 0.5 mm and 0.7 mm gauges in UK trade guides for single-skin sheet. Gross area is not finished cover once you allow for laps. A ridge is often a separate pack. Stars below are the amazon.co.uk Customer Reviews line only, and two colour listings can share one text.
What are corrugated sheets?
A corrugated sheet is a board with a repeating wave. On amazon.co.uk that wave covers three products that are not substitutes. Steel panels, sinusoidal or trapezoidal, are short roofing packs for sheds, kennels, lean-tos and cladding. Fluted polypropylene is the plastic board used for temporary floors and for signs that get wet. Kraft pads are single-wall cardboard for posting and craft. A single-face roll is paper that bends around a curve, so it is a wrap, not a flat stiffener.
Best for
A small shed, kennel or lean-to where you can work from a proper platform and buy a ridge separately
Dry parcels, craft pads, or a wet decorating floor when the material matches that job
Not ideal for
A house roof, a span that trade guides would sheet in 0.5 mm or 0.7 mm, or a roof that may be asbestos
One pack that is meant to roof a shed and also keep a print flat in the post
Mistakes to avoid
1
Treating gross area as cover
Title square metres ignore a side lap of one or two corrugations and the end lap. One steel title already disagrees with its own unit count. Measure the roof, then subtract the laps, before you trust the pack claim.
2
Equating 0.25 mm with 0.5 mm
UK trade guides treat 0.5 mm as a common shed gauge and 0.7 mm when the span or the exposure increases. Every steel pack here states 0.25 mm. That is not a BS EN 14782 claim.
3
Adding the two colour ratings
The anthracite and green 14-packs share one 51-review text. That is not 102 reviews. The paper roll's 4.5 from six ratings is not a UK sample either.
What to weigh up
Job, material and thickness
High
The first check is the job, because these boards are not substitutes. A shed, kennel or lean-to needs galvanised or coated steel. A wet floor, or a sign that must survive rain, needs fluted polypropylene. A dry parcel or a craft piece needs kraft, and a curve needs single-face paper rather than a flat pad. Thickness comes next. UK trade guides for single-skin metal treat 0.5 mm as a common shed gauge and 0.7 mm when the purlin span or the exposure increases.
Cover, fixings and evidence
High
Cover, fixings and the review sample decide whether the sheet in the title is the sheet you can use. Seller square metres are gross. A side lap of one or two corrugations and an end lap reduce finished cover, and one steel title already disagrees with its own unit count. A ridge is missing from several roof packs. One listing says a separate five-cap pack fits one 14-sheet pack. Supplied screws are not a reason to trust the kit.
Which option suits you?
Three typical situations, each with a recommendation from this comparison.
🏠
Small shed or kennel
You are replacing felt on a small roof and you can work from a proper platform. The Harbour Housewares anthracite 14-pack is the top pick at about £57.99: stated 0.25 mm, 4.6 from 51 ratings, and that text is shared with the green listing. Holes are not pre-drilled, and the ridge is separate. It is not a 0.5 mm trade sheet.
You need a dry pad, not a roof. The yuejuhe 20 A4 kraft sheets are about £9.95, with 4.5 from 589 ratings, the deepest cardboard sample here. Reviewers say the board is often thinner than the stated 1.8 mm. It is the wrong sheet when a print must stay flat on its own.
You need fluted plastic, not kraft, on a wet floor. The Floor Nation pack is two 4 mm polypropylene sheets at 2.4 x 1.2 m, about £34.95, with 5.0 from 3 ratings. Packs of one to four sheets arrive rolled. The listing does not name LPS 1207, and it is not a galvanised roof panel.
The top pick is the Harbour Housewares anthracite 14-pack at about £57.99. It scores 9.2. Each panel is stated at 110 x 46 cm and 0.25 mm, with 4.6 from 51 amazon.co.uk ratings. That review text is shared with the green listing, so do not add the two counts. The sheets are supplied without pre-drilled holes, and ridge caps are sold separately. It suits a small coloured shed if you accept 0.25 mm.
Which corrugated sheet is best value?
Best value is the Mondeer 14 dark grey pack at about £53.99. It scores 9.0, with 4.5 from 257 ratings, the largest steel sample here. Panels are stated at 110 x 46 cm and 0.25 mm. Reviewers fitted sheds, a fence and a lean-to, and several call the sheet thin until it is screwed down. The box lists 14 sheets and no ridge. Bullets and one review disagree on pre-drilled holes.
How much do corrugated sheets cost on amazon.co.uk?
Stored amazon.co.uk prices in this set run from about £9.95 to about £73.99. Kraft pads and a single-face roll sit from about £9.95 to £15.99. Sixty kraft squares are about £22.99. Two 4 mm polypropylene floor sheets are about £34.95. Fourteen-sheet steel packs are about £53.99 and £57.99, and a 24-sheet black pack is about £73.99. These are stored shelf figures, not a live check.
What should you check before you buy corrugated sheets?
Check the job before the brand: a roof or cladding, a floor, a sign, or a dry parcel. Steel here is stated at 0.25 mm, while UK trade guides use 0.5 mm or 0.7 mm for single-skin sheds. Subtract laps from the seller's square metres, and check whether a ridge is in the box. Kit screws are a weak point if reviews say the heads strip. Do not add two colour listings that share one review text.
Are these 0.25 mm steel packs the same as trade sheet?
No. These steel listings state 0.25 mm. UK trade guides treat 0.5 mm as a common shed gauge and 0.7 mm when the span or the exposure increases. BS EN 14782 is the specification for self-supporting metal sheet, and it is not printed on these listings. This comparison does not treat the packs as compliant. A 0.25 mm panel is only for a small cover where you accept a thin sheet.
How do you fix steel corrugated sheet?
Do not walk the sheets or the bolt line. Treat a roof as fragile until a competent person says otherwise, including old asbestos cement. Crest fixing is the usual instruction on sinusoidal steel. Some trapezoidal profiles are fixed in the trough, so match the sheet you bought. A ridge is often a separate pack. The lap and fixing sequence is in how to fit corrugated sheets.
Is fluted plastic the same as corrugated cardboard?
No. Fluted polypropylene is a plastic board for wet floors and signs. Kraft is a paper pad for dry posting and craft. A single-face roll bends around a shape and is not a flat stiffener. One small plastic listing conflicts a plastic material line with a cardboard bullet, so check what arrives. Plain polypropylene here does not name LPS 1207, so do not treat it as a flame-retardant protection sheet.
Are corrugated iron sheets in this comparison?
This set mixes thin steel packs, fluted plastic and kraft pads. Listings sold as corrugated iron are a separate comparison: corrugated iron sheets. Do not treat a 0.25 mm shed pack, a polypropylene floor sheet or an A4 pad as the same product. Bitumen corrugated sheet is a common shed alternative in UK guides and is not a listing here. Check the material line before you compare a price.
Our verdict
The top pick is the Harbour Housewares anthracite 14-pack at about £57.99. It scores 9.2: panels stated at 110 x 46 cm and 0.25 mm, with 4.6 from 51 ratings. That review text is shared with the green listing. Ridge caps are sold separately, and the sheets arrive without pre-drilled holes. Best value is the Mondeer 14 dark grey pack at about £53.99, score 9.0, with 4.5 from 257 ratings, still 0.25 mm and still without a ridge in the box. Floor Nation scores 10 on 5.0 from 3 ratings and does not take the top pick, because it is a polypropylene floor sheet, not a roof pack.
Peter F. is the editor for DIY & tools at productscompared.co.uk. Comparisons in this category are checked against amazon.co.uk listings, review evidence and public UK sources.
Updated: 22.10.2026
8 sources checked
Guides to corrugated sheets
Guides on what to look for, how to use a product, and common mistakes.
This page contains affiliate links to amazon.co.uk (tag pcuk26-21). If you buy through them, we may earn a commission at no extra cost to you. Prices, stars and review counts are the amazon.co.uk figures already stored for this set. This is not a laboratory test.