Independent comparisons. We may earn from shop links. More info

Lawn edging metal comparison 2026

The best metal lawn edging, compared.

Top pick: CORE EDGE 65 mm black – Ties on 82, then takes the badge on 907 reviews against 612 and the lower shelf price of about £38.49. Best value: VOUNOT 10 m galvanised – Highest score at or under £30 with at least 100 reviews: 80, about £23.49 for a stated 10 m. Updated 23 October 2026.

Peter F.
Peter F.Editor

Lawn edging metal is a steel strip, or short steel sections, that holds the line between grass and a bed, a path, gravel or bark. In the UK you choose it when a plastic coil has kinked, timber has rotted, or you want a boundary a mower can cross without a weekly clip with shears. Judge a suitable strip by the thickness stated on the listing, a top that is folded rather than left as a raw cut, and an anchor that is actually in the box. About 0.5 to 0.7 mm is a light coil. Around 1.5 to 1.6 mm is the domestic figure used for a spiked lawn-to-bed edge. A taller face is not a better mowing edge. If the mower is the point, set the top at or just below cutting height. Gloves or a plug-in join are not stakes. Where the title and another length cell disagree, a price per metre is not settled. Thickness, height, finish and fixings are set out in the [metal lawn edging buying guide](/hub/lawn-and-garden-equipment/lawn-edging-metal/sub/lawn-edging-metal-buying-guide).

Lawn edging metal is a steel strip, or short steel sections, that holds the line between grass and a bed, a path, gravel or bark.

CORE EDGE 65 mm black

Best overall

CORE EDGE 65 mm black
8.2/10∼ £38

38 products checked · 64 hrs invested · +21,400 readers

11 of 11: Best metal lawn edging compared

Swipe for more

1-2 of 11
Best overall
CORE EDGE 65 mm black
CORE EDGE 100 mm black
DLYYPLUS 20 ft black
Nicoman 5 m, 150 mm
UNIGARDIA 10 m spiked
Jordbrux corten 10 m
Focefec 20 ft galvanised
Best value
VOUNOT 10 m galvanised
UNIGARDIA corten 5 m
UNIGARDIA anthracite
UNIGARDIA corten 10 m
8.2/10
8.2/10
5.6/10
6.0/10
7.3/10
4.9/10
5.5/10
8.0/10
6.9/10
3.9/10
7.1/10
∼ £38
∼ £45
∼ £23
∼ £31
∼ £45
∼ £36
∼ £28
∼ £23
∼ £20
∼ £25
∼ £38
4.6(907)
4.6(612)
4.6(45)
4.6(38)
4.3(126)
4.3(18)
4.2(67)
4.1(1,114)
4.0(262)
4.0(26)
3.8(696)
View offer
View offer
View offer
View offer
View offer
View offer
View offer
View offer
View offer
View offer
View offer

The best metal lawn edging in detail

CORE EDGE 65 mm black

Rank 1

CORE EDGE 65 mm black

∼£38

Our view

The 65 mm CORE EDGE gives you a low, firm boundary that UK reviewers say can follow corners and arcs while still letting a mower pass over it. Its 1.6 mm steel and integral spikes make it more substantial than the thin coiled strips in this comparison. The dual-lock joints create a continuous line, although reviewers find them awkward if the sections have already been driven into the ground. Hard or stony soil may need opening with a chisel before the spikes will enter cleanly. A rubber or wooden mallet is the safer choice because striking the top directly can mark the black finish. The amazon.co.uk title does not state the total pack length, so the price cannot be compared per metre from that title alone.

Pros

  • 1.6 mm steel with integral ground spikes
  • Low 65 mm face can suit a mower edge
  • Bends around corners and broad curves
  • 4.6 stars from 907 saved reviews

Cons

  • Joints become fiddly after sections are buried
  • Hard ground may need a slot or chisel first
  • Pack metres are not stated in the amazon.co.uk title

Best for: Neat lawn-to-bed or lawn-to-path lines where a low black edge and integral spikes matter.

Less suitable: Buyers who need a verified price per metre or a no-preparation installation in hard, stony ground.

Specifications

Model
CORE EDGE 65 mm black
Brand
CORE EDGE
Price
∼£38
Customer rating
4.6/5(907)
Material
Alloy steel
Face height
65 mm
Thickness
1.6 mm
Fixings
Integral spikes
Install
Hammer tap
Curves
Corners and arcs
Finish
Black

Common questions

Does the title say how many metres you get?

No. The title states a 65 mm black face. The cell says 5 items and 107.5 cm. The manufacturer page describes five 1,075 mm strips as 5 m. That sentence is not the amazon title.

Are the spikes separate pegs?

The bullet describes a ground spike on the steel section and a dual lock between sections. Separate pegs are not listed.

What did UK reviewers say about the mower and hard ground?

Reviews say the mower can pass over the edge and that a rubber or wooden mallet avoids marking the top. Hard ground needed a chisel for the spikes. Joins are fiddly once the steel is buried.

CORE EDGE 100 mm black

Rank 2

CORE EDGE 100 mm black

∼£45

Our view

The 100 mm CORE EDGE provides a deeper visible face than the 65 mm version, backed by a stated 95 mm integral spike. Its 1.6 mm steel suits straight runs and sweeping curves, and the powder-coated black finish is claimed to resist UV exposure. Saved UK reviews support the strong 4.6-star line, but also describe the joins as awkward once the pieces are partly buried. One installation reportedly needed four people for a 10 m run, so this is not automatically a quick solo job. A reviewer also questioned the exposed top edge in a garden used by a child, making the final setting height important. The amazon.co.uk title does not give a total metre length, so a defensible price-per-metre figure is unavailable.

Pros

  • 1.6 mm steel with a 100 mm face
  • Integral 95 mm spike
  • Works for straight lines and sweeping curves
  • 4.6 stars from 612 saved reviews

Cons

  • More expensive than the 65 mm CORE EDGE
  • Joining and aligning a long run can take several people
  • Exposed top needs care around children
  • Pack metres are not stated in the title

Best for: Deeper bed or path boundaries that need a rigid black section with integral anchoring.

Less suitable: A low mow-over line, a quick solo fit, or anyone comparing products strictly by stated price per metre.

Specifications

Model
CORE EDGE 100 mm black
Brand
CORE EDGE
Price
∼£45
Customer rating
4.6/5(612)
Material
Alloy steel
Face height
100 mm
Thickness
1.6 mm
Fixings
95 mm spike
Install
Hammer tap
Curves
Sweeping curves
Finish
Black powder coat

Common questions

How long is the pack on the title?

The title does not state metres. Number of items is 1 and the dimension cell is 107.5 cm. One UK review describes laying out five pieces.

What sits under the 100 mm face?

The bullet adds a 95 mm ground spike with a fold along the centre, and a dual lock between sections.

What did UK reviewers struggle with?

Price, joins if you bury the sections first, and one review that needed four people for a 10 m run. Another worried about the top edge where a child plays.

DLYYPLUS 20 ft black

Rank 3

DLYYPLUS 20 ft black

∼£23

Our view

The DLYYPLUS is a single black corrugated strip measuring a stated 20 ft, or about 6.09 m, by 6 in high. Its flexible coil can form circles and custom curves, and the rolled edges are intended to make handling less harsh. The listing gives no metal thickness and includes no fixings, so its 4.6-star line from 45 reviews cannot answer how rigid the edge will be. One saved reviewer calls it flimsy, while another wanted a less sharp top. The instructions distinguish soft ground, where it may be hammered in, from hard or rocky soil, where a narrow trench is needed. It is inexpensive for a decorative curved line, but the limited evidence and missing gauge keep it below the more clearly specified products.

Pros

  • Stated 20 ft length
  • Flexible corrugated strip for curves
  • Black finish
  • Low £22.99 shelf price

Cons

  • Metal thickness is not stated
  • No fixings listed
  • Small review sample
  • Saved feedback questions rigidity and the top edge

Best for: Curved decorative beds in soft soil where a flexible black coil is useful.

Less suitable: A load-bearing or mow-over boundary, hard ground without trenching, or buyers who require a stated gauge.

Specifications

Model
DLYYPLUS 20 ft black
Brand
DLYYPLUS
Price
∼£23
Customer rating
4.6/5(45)
Material
Metal
Stated length
6.09 m
Face height
160 mm
Fixings
None listed
Install
Hammer or trench
Curves
Circles and curves
Finish
Black
Price per metre
£3.77/m
Origin
China

Common questions

How long and how high is it?

The title says 6 in by 20 ft. The dimension cell is 6.09 m by 0.16 m, which matches that title.

Do you dig?

The bullet says hammer soft ground. For hard or rocky soil it says dig a narrow trench, insert the strip and backfill.

Is a thickness given?

No. Reviews call it flexible and, in one case, flimsy, and one reviewer wanted a less sharp top.

Nicoman 5 m, 150 mm

Rank 4

Nicoman 5 m, 150 mm

∼£31

Our view

The Nicoman supplies five stated metres in five 150 mm-high pieces, with a 1.5 mm thickness in the product bullet. That makes it notably more substantial on paper than the 0.5–0.7 mm rolls, while still being described as flexible. Reviewers mention joining clips and using pliers, although the listing does not clearly itemise the connecting hardware. The title also calls the product both corten and pre-rusted galvanised, while the bullet only says flexible steel, so the finish chemistry is unclear. Its 4.6-star line looks strong but rests on just 38 reviews, a much smaller evidence base than the leading rows. At about £6.12 per stated metre, it is a relatively expensive choice that needs the finish and connector details checked before purchase.

Pros

  • Stated 1.5 mm steel
  • Five stated metres in five pieces
  • 150 mm title height
  • Strong saved star average

Cons

  • Only 38 reviews support the star line
  • Title mixes corten and galvanised descriptions
  • Join hardware is not clearly itemised
  • About £6.12 per stated metre

Best for: Buyers wanting thicker sectional edging who can verify the finish and joining parts before ordering.

Less suitable: Anyone who needs an unambiguous corten specification, a large review sample or the lowest cost per metre.

Specifications

Model
Nicoman 5 m, 150 mm
Brand
Nicoman
Price
∼£31
Customer rating
4.6/5(38)
Material
Flexible steel
Stated length
5 m
Face height
150 mm
Thickness
1.5 mm
Fixings
Hammer-in strip
Install
Hammer tap
Curves
Flexible strip
Finish
Finish unclear
Price per metre
£6.12/m

Common questions

Is it galvanised or corten?

The title says both pre-rusted galvanised and corten. The bullet says 1.5 mm flexible steel and does not repeat corten. The colour cell says Corten.

How do the pieces join?

Reviews mention clips that are harder to pull into place, and pliers. The bullet does not list a connector kit.

How many reviews is 4.6 based on?

The saved line is 4.6 from 38. Thirteen UK blocks are in the raw, and several are only a few words.

UNIGARDIA 10 m spiked

Rank 5

UNIGARDIA 10 m spiked

∼£45

Our view

This UNIGARDIA set combines a stated 10 m length, 1.6 mm galvanised steel and spikes, so its specification looks suited to a substantial boundary. Ten pieces and assembly gloves are listed, and the product bullet presents installation as a hammer-in job without digging. Review evidence is less tidy: one owner calls the sheet flimsy when trying to hold a straight line. More importantly, the title says 150 mm high while a UK review says that measurement includes the spikes and leaves a 65 mm face. The saved item-weight cell of 900 g also does not explain whether it applies to one piece or the whole pack. It remains a plausible spiked option, but the unresolved dimensions make careful checking necessary before you set out the line.

Pros

  • Stated 10 m length
  • 1.6 mm galvanised steel
  • Integral spikes and gloves included
  • Can follow straight or curved layouts

Cons

  • Visible face height is disputed
  • A review reports difficulty keeping it straight
  • The 900 g weight cell is ambiguous

Best for: A long galvanised run where integral spikes are preferable to separate pegs.

Less suitable: Projects that require a verified 150 mm visible face or perfectly documented pack dimensions.

Specifications

Model
UNIGARDIA 10 m spiked
Brand
UNIGARDIA
Price
∼£45
Customer rating
4.3/5(126)
Material
Galvanised steel
Stated length
10 m
Thickness
1.6 mm
Fixings
Spikes and gloves
Install
Hammer in
Curves
Straight or curved
Finish
Galvanised
Price per metre
£4.50/m
Origin
China

Common questions

Is the face 15 cm?

The title and the bullet say 150 mm high. One UK review says that 15 cm includes the spikes, so the face is 65 mm. The page does not resolve it.

Do you have to dig?

The bullet says no digging, hammer the spikes in. A review still calls the sheet flimsy when you try to keep a straight line.

What is the 900 g figure?

The item-weight cell says 900 g. The listing does not say whether that is one piece or the 10 m pack.

Jordbrux corten 10 m

Rank 6

Jordbrux corten 10 m

∼£36

Our view

The Jordbrux provides a stated 10 m corten roll with a 14 cm face and a bullet thickness of 0.5 mm. That thin gauge makes it easy to bend around curves, but saved reviews say achieving a genuinely straight run is harder. The instructions expect you to dig a slot and shape the strip rather than drive it unsupported. Gloves are recommended but are not listed in the box, and there are no stated pegs. The 4.3-star average is based on only 18 reviews, so it offers much less evidence than the established 10 m rolls. One reviewer also disputes a separate 5 mm figure on the page, reinforcing the need to treat the bullet's 0.5 mm as the usable saved specification.

Pros

  • Stated 10 m length
  • Corten steel claim
  • Flexible for curves
  • About £3.60 per stated metre

Cons

  • Very thin 0.5 mm gauge
  • Only 18 saved reviews
  • No fixings or gloves listed
  • Conflicting thickness information appears on the page

Best for: Curved rust-finish borders where easy shaping is more important than stiffness.

Less suitable: Straight formal lines, exposed mower edges or buyers who want well-supported specifications and reviews.

Specifications

Model
Jordbrux corten 10 m
Brand
Jordbrux
Price
∼£36
Customer rating
4.3/5(18)
Material
Corten steel
Stated length
10 m
Face height
140 mm
Thickness
0.5 mm
Fixings
None listed
Install
Dig a slot
Curves
Curves, not straight
Finish
Corten
Price per metre
£3.60/m
Origin
China

Common questions

How thick is the roll?

The size bullet says 10 m by 14 cm by 0.5 mm. One UK review says a page figure of 5 mm did not match metal they judged under 1 mm.

Do you dig?

Yes. The bullet says dig the soil out, then shape the strip. It also says wear gloves. Gloves are not listed as included.

How many reviews support the 4.3?

The saved line is 4.3 from 18. Eleven UK blocks are in the raw.

Focefec 20 ft galvanised

Rank 7

Focefec 20 ft galvanised

∼£28

Our view

The Focefec is a galvanised corrugated coil with a title size of 8 in by 20 ft and a saved metric cell of roughly 0.2 by 6 m. Its folded edges and flexible form can suit circles or shaped beds, but no thickness or fixing kit is stated. The bullet says no digging is needed in slightly damp soft soil, then describes inserting and hammering the strip. Saved reviews are more cautious: direct tapping in hard ground can bend it, and one owner added timber pegs and screws for support. Another reviewer says the received coil was about 15 ft rather than the advertised 20 ft, which is a serious length concern. This is a flexible budget barrier rather than a precisely specified structural edge.

Pros

  • Galvanised finish
  • Flexible 20 ft title length
  • Folded edges mentioned in saved feedback
  • Can form curved shapes

Cons

  • Thickness is not stated
  • No pegs included
  • Can bend when driven into hard ground
  • One review reports a shorter coil than advertised

Best for: Shaped bed borders in workable soil where extra homemade support can be added.

Less suitable: Projects needing a guaranteed 20 ft run, a stated steel gauge or a rigid exposed edge.

Specifications

Model
Focefec 20 ft galvanised
Brand
Focefec
Price
∼£28
Customer rating
4.2/5(67)
Material
Galvanised steel
Stated length
6 m
Face height
200 mm
Fixings
None listed
Install
Insert and hammer
Curves
Shaped beds
Finish
Galvanised
Price per metre
£4.67/m
Origin
China

Common questions

Does the bullet really mean no digging?

It says no digging is required, on slightly damp soft soil, then tells you to cut, insert and hammer. Reviews say a direct tap on hard ground bends it.

Is the coil 20 ft?

The title says 20 ft and the cell says 6 m. One UK review says their coil was about 15 ft.

Are pegs included?

No. One review added timber pegs and screws to hold a bed.

VOUNOT 10 m galvanised

Rank 8

VOUNOT 10 m galvanised

∼£23

Our view

The VOUNOT covers a stated 10 m for £23.49, making it the best-value pick in this saved set at about £2.35 per metre. Its ten galvanised panels use plug-in ends and can form corners, arcs and circles. The 0.7 mm steel is much thinner than the 1.6 mm spiked sections, and UK reviewers say it can buckle unless it is supported in a trench. No separate pegs are listed, despite reviewers wishing they were included. Installation therefore depends more on careful burial and backfilling than the product bullets suggest. The saved weight cell says 2 kg, but one reviewer described a parcel over 15 kg, so that specification remains unresolved.

Pros

  • Stated 10 m coverage at about £2.35 per metre
  • Galvanised finish
  • Panels can form corners, arcs and circles
  • Large saved review base of 1,114

Cons

  • Thin 0.7 mm panels can buckle
  • No pegs listed in the box
  • Installation usually needs a trench
  • Saved weight information is inconsistent

Best for: Long, budget-conscious bed borders where most of the panel can be supported by soil.

Less suitable: A rigid mow-over edge, unsupported straight runs, or hard ground where you expect to hammer the panel directly.

Specifications

Model
VOUNOT 10 m galvanised
Brand
VOUNOT
Price
∼£23
Customer rating
4.1/5(1,114)
Material
Galvanised steel
Stated length
10 m
Face height
180 mm
Thickness
0.7 mm
Fixings
Plug-in ends
Install
Trench then tap
Curves
Corners and circles
Finish
Galvanised
Price per metre
£2.35/m
Origin
China

Common questions

Are pegs included?

No. The bullet describes a plug-in join and no screws. UK reviews ask for pegs the box does not contain.

How thick is the steel?

The characteristics bullet says 0.7 mm galvanised steel. Reviews call that gauge thin and say it buckles unless it is buried well.

Does the weight cell match the reviews?

The cell says 2 kg. One UK review says the parcel was over 15 kg. Both are saved. They are not reconciled.

UNIGARDIA corten 5 m

Rank 9

UNIGARDIA corten 5 m

∼£20

Our view

The 5 m UNIGARDIA roll offers the same 14 cm by 0.6 mm corten format in a smaller £19.99 pack. It is supplied already rusty with gloves, making it an accessible way to edge one modest bed or a short curve. Reviewers nevertheless say the tightly coiled strip is difficult to straighten and can retain a wavy shape. Tin snips, a rubber mallet and a wooden block are mentioned in the saved feedback, so the job needs more control than an ordinary hammer-in edge. No pegs are listed, leaving the trench and compacted soil to provide most of the support. The shorter roll limits waste on a small project, but it does not solve the thin steel's weakness on a precise straight line.

Pros

  • Useful 5 m pack for a smaller project
  • Low shelf price of £19.99
  • Flexible 0.6 mm corten strip
  • Assembly gloves included

Cons

  • Coil memory can leave a wavy line
  • No pegs listed
  • Thin top can deform during fitting

Best for: A short curved bed where you want a rusty finish without buying a 10 m roll.

Less suitable: Long straight borders, rigid mower edges or installations without enough soil support.

Specifications

Model
UNIGARDIA corten 5 m
Brand
UNIGARDIA
Price
∼£20
Customer rating
4.0/5(262)
Material
Corten alloy
Stated length
5 m
Face height
140 mm
Thickness
0.6 mm
Fixings
Gloves only
Install
Mallet and block
Curves
Curved or straight
Finish
Rusty corten
Price per metre
£4.00/m
Origin
China

Common questions

What is in the box besides the strip?

A pair of assembly gloves. Pegs are not listed. Reviews say wear the gloves because of the rust.

Can you hammer it straight?

UK reviews say the tight roll is hard to straighten and can stay wavy. They use tin snips, a rubber mallet and a wooden block.

How thick is it?

The bullet says 0.6 mm corten alloy, supplied already rusty, with the patina continuing to age.

UNIGARDIA anthracite

Rank 10

UNIGARDIA anthracite

∼£25

Our view

This UNIGARDIA coil offers an anthracite corrugated edge with a title size of 12 m by 15 cm. Saved reviewers describe it as sturdy and easy to cut, and assembly gloves are included. The listing is internally inconsistent, however: one bullet calls the finish powder-coated while another says galvanised steel. The title and dimension cell say 12 m, but the unit-count cell says 6 m, so a fair price-per-metre calculation is not possible. No thickness or pegs are stated, and one review says neither side is sharper, making hard ground more difficult. With only 26 reviews behind its 4.0-star line, this remains a low-cost but poorly documented option.

Pros

  • Anthracite appearance
  • Low £24.99 shelf price
  • Gloves included
  • Saved reviews say it is easy to cut

Cons

  • 12 m and 6 m cells conflict
  • Finish description conflicts
  • No thickness or pegs stated
  • Only 26 saved reviews

Best for: A dark decorative bed edge where you can confirm the supplied length before fitting.

Less suitable: Price-per-metre comparisons, hard ground or any project needing a clearly specified coating and gauge.

Specifications

Model
UNIGARDIA anthracite
Brand
UNIGARDIA
Price
∼£25
Customer rating
4.0/5(26)
Material
Metal
Face height
150 mm
Fixings
Gloves only
Install
Mallet and block
Curves
Cut to length
Finish
Anthracite
Origin
China

Common questions

Is it 12 m or 6 m?

The title and the dimension cell say 12 m. The unit-count cell says 6.0 metre. Price per metre is not stated for that reason.

Is the finish galvanised or powder-coated?

One bullet says an anthracite powder coat. Another calls it galvanised steel. Both are on the saved page.

What do the UK reviews say?

Four UK blocks. They call it sturdy and easy to cut. One says it is not sharper on one side, so hard ground is harder to enter.

UNIGARDIA corten 10 m

Rank 11

UNIGARDIA corten 10 m

∼£38

Our view

The 10 m UNIGARDIA corten roll creates a continuous 14 cm weathered-looking border for about £3.80 per stated metre. It arrives rusty and includes gloves, but it does not list spikes. At 0.6 mm, the strip is easy to curve yet lacks the rigidity of the 1.5–1.6 mm sectional products. UK reviews repeatedly report kinks, waves and a top edge that bends when struck directly, especially on straight runs. A trench and a wooden block are more realistic than simply hammering the exposed steel. Its 3.8-star line from 696 reviews gives those complaints more weight than a handful of isolated comments, so choose it for forgiving curves rather than a crisp straight kerb.

Pros

  • Continuous stated 10 m length
  • Corten-style rusty finish
  • Flexible enough for curved borders
  • Gloves included

Cons

  • Thin 0.6 mm roll can kink and stay wavy
  • No spikes listed
  • Direct hammering can bend the top
  • Lower 3.8-star saved rating

Best for: Curved planted borders where an informal rusted finish matters more than a ruler-straight line.

Less suitable: Straight mowing edges, unsupported runs or installations where you plan to strike the metal directly.

Specifications

Model
UNIGARDIA corten 10 m
Brand
UNIGARDIA
Price
∼£38
Customer rating
3.8/5(696)
Material
Corten alloy
Stated length
10 m
Face height
140 mm
Thickness
0.6 mm
Fixings
Gloves only
Install
Trench and block
Curves
Kinks on straights
Finish
Rusty corten
Price per metre
£3.80/m
Origin
China

Common questions

Are spikes in the box?

No. The box includes gloves. One UK review says spikes are a separate order.

Will it stay straight?

The bullet allows curves or straight lines. UK reviews repeatedly say the 0.6 mm roll kinks and a foot or a hammer bends the top.

What does the listing say about the rust?

It says the strip is a corten alloy, not a rust spray, and that an uneven patina on arrival is not a defect. One review still says it looked sprayed.

How we compared

Scores use saved amazon.co.uk shelf prices and star lines from 19 October 2026. This is not a laboratory test. The score starts with the star rating divided by five, then multiplied by 50. A review-count band adds up to 20 points. Stated thickness adds up to 12, spikes or pegs in the box add 8, a title length you can divide adds 4, and a usable price per metre adds up to 6. Those parts sum to 100. Six points come off once if the saved page contradicts itself on length, height or thickness. Best-seller rank adds nothing. Where two products tie, the top pick is the one with more reviews and the lower shelf price. The best value is the highest score at or under £30 with at least 100 reviews.

1

Amazon star rating

50%

Stars divided by five, then multiplied by 50. This is the largest part of the score and comes from the saved amazon.co.uk line.

2

Review volume

20%

A band of up to 20 points for the saved review count, from 20 at 1,000 reviews down to 2 when the sample is small.

3

Stated thickness

12%

Up to 12 points when thickness is stated at 1.5 mm or more, less for thinner stated gauges, and none when the listing omits it.

4

Fixings in the box

8%

Eight points for spikes or pegs supplied with the steel. Gloves or a plug-in join without stakes score less. Nothing listed scores none.

5

Stated length

4%

Four points when the title states a length you can divide. No points when the title omits metres or clashes with another cell.

6

Price per stated metre

6%

Up to 6 points when a defensible price per metre is £3 or under, and less above that. No points when a per-metre figure cannot be published.

Independent review
Last updated: 23 October 2026
8 sources checked

Metal lawn edging buying guide

Buy metal lawn edging when you need a steel line that stays in the ground, not a tool that cuts a fresh soil face. Check stated thickness, the height that will show, the fixings in the box, the finish, and whether the title length can be divided. Stars count only beside the review count, and they are not a turf trial.

What is metal lawn edging?

Metal lawn edging is a steel strip, or a run of short steel sections, that holds a line between grass and a bed, a path, gravel or bark. You buy it in the UK when a plastic coil has kinked, timber has rotted, or you want a line a mower can cross without clipping that edge with shears every week. A thin corrugated roll and a spiked section around one and a half millimetres are different tools, even when both are sold as flexible steel.

Best for

  • A mowing line set at or just below cutting height
  • A long bed or gravel barrier you can support in a trench
  • A curved border where a weathering finish is the point

Not ideal for

  • A bank, a driveway, or wheels crossing a lawn-gauge edge
  • A listed building, a conservation area, or a highway boundary
  • Anyone who needs a price per metre the title does not state

Mistakes to avoid

  1. 1

    A price per metre the title does not support

    Divide only a length the title states, and only when another cell does not contradict it. Two spiked titles here omit pack metres. One title says 12 m while a unit cell says 6.0 metre. Those per-metre figures stay unpublished.

  2. 2

    Reading corten as a test grade

    Weathering steel needs wet and dry cycles. The word corten on a bullet is not BS EN 10025-5 and does not prove a named plate grade. A corten claim can be mild steel. Keep runoff off pale paving, and prefer galvanised steel within about 2 km of the coast.

  3. 3

    Hammering a thin roll, or leaving a tall face proud

    A 0.5 to 0.7 mm coil kinks in baked soil and bends if you strike the top. Use a trench, gloves and a timber block. For a mower, set the top at or just below cutting height. A lawn-gauge strip is not a retaining wall and it is not for vehicle wheels.

What to weigh up

Thickness and face height

High

Thickness is the first check because a light coil and a spiked section do different jobs. About 0.5 to 0.7 mm is a light coil: fine for curves, weak as a straight kerb. Around 1.5 to 1.6 mm is the domestic spiked figure for a lawn-to-bed edge. EverEdge separates 1.6 mm from 2.5 mm if wheels might cross. Kinley talks about 3 mm as an aim, and specified edges are discussed around 3 to 6 mm. If the listing omits thickness, leave the cell blank.

Fixings, finish and a length you can divide

High

Spikes or pegs in the box change the install. Gloves or a plug-in join are not stakes, and a bullet that says no digging still fails in hard ground if the steel is thin. Galvanised is zinc. Powder coat is paint. Weathering steel, often sold as corten, needs wet and dry cycles. The word on the bullet is not BS EN 10025-5. Straightcurve points to galvanised steel within about 2 km of the coast, and rusty runoff should stay off pale paving.

Which option suits you?

Three typical situations, each with a recommendation from this comparison.

A mowing line

You want a spiked section around 1.5 to 1.6 mm, set below the blades. The CORE EDGE 65 mm black is 1.6 mm steel with integral spikes and a low face, about £38.49, with 4.6 from 907 reviews. Hard ground may need a slot first, and the title does not state pack metres.

A long bed on a budget

You want a long gravel or bed barrier and you can accept a thinner panel. The VOUNOT covers a stated 10 m for about £23.49, about £2.35 a metre, in galvanised steel with plug-in ends. It can buckle without a trench, and no pegs are listed.

A brown curved edge

You want a weathering-steel look on a curve, and you will keep runoff off pale paving. The UNIGARDIA corten 10 m roll is 0.6 mm and about £37.99, with gloves and no spikes. Reviews report kinks on straight runs. Use galvanised steel within about 2 km of the coast.

Common questions about metal lawn edging

What thickness of metal lawn edging should you look for?
About 0.5 to 0.7 mm is a light coil. It can follow a curve, and it is weak as a straight kerb. Around 1.5 to 1.6 mm is the domestic figure used for a spiked lawn-to-bed edge. Trade pages talk about 2.5 mm if wheels might cross, and about 3 to 6 mm for a specified edge. If the listing does not state a thickness, leave the gauge blank. Do not treat a 0.6 mm roll as lawnmower-proof.
Which metal lawn edging is the top pick for 2026?
The top pick is the CORE EDGE 65 mm black. It scores 82, the same as the 100 mm CORE EDGE. The 65 mm takes the badge because 907 amazon.co.uk reviews outnumber 612 and the saved shelf price, about £38.49, is lower. It is 1.6 mm steel with integral spikes and a low face. The title does not state pack metres, so a price per metre is not given. The score compares saved listings. It is not a laboratory test.
What is the best value metal lawn edging in this set?
The best value is the VOUNOT 10 m galvanised edging, about £23.49, score 80. The title states 10 m, which is about £2.35 per metre, and the saved line is 4.1 from 1,114 reviews. It is the highest score at or under £30 with at least 100 reviews. The steel is 0.7 mm, with plug-in ends and no pegs. UK reviews say the panels can buckle unless they are supported in a trench.
How should you set metal edging if a mower will cross it?
Set the top at or just below cutting height. A taller face is not a better mowing edge. EverEdge, a UK maker, notes about 10 to 15 mm below the cut. That is their guidance, not a law or a British Standard. A spiked section around 1.5 to 1.6 mm suits a lawn-to-bed line. A thin coil is a different tool. Cutting a fresh soil face is a hand-edger job, covered in the lawn edger comparison.
Is corten on the listing a certified weathering steel?
No. Weathering steel, often sold as corten, needs wet and dry cycles to form a patina. The word corten on a product bullet is not BS EN 10025-5, and it does not show that the strip is a named grade. Kinley notes that a corten claim can be mild steel. Keep rusty runoff off pale paving. Within about 2 km of the coast, choose galvanised steel instead of a weathering claim.
When is a price per metre not valid?
Only a title length you can divide, and that does not clash with another cell, supports a price per metre. Two spiked titles in this set omit pack length, so those figures are withheld. One anthracite title says 12 m while a unit cell says 6.0 metre, so that figure is withheld too. The Consumer Rights Act 2015 requires the goods to match the description, including length and thickness.
Do you need planning permission for metal lawn edging in England?
A flush lawn edge in a garden is landscaping, not a tall fence. In England, GPDO 2015 Schedule 2 Part 2 Class A limits a means of enclosure to 1 metre beside a vehicular highway and 2 metres elsewhere, and it excludes listed buildings. Scotland, Wales and Northern Ireland do not copy that order. Ask the council if the run is a boundary, a conservation area, or listed. A lawn-gauge strip is not a retaining wall.
When should you stop and call a professional?
Call someone in when the steel must hold a bank, when the run is a listed building or a highway boundary, when a spike meets a service, or when vehicle wheels will cross a lawn-gauge edge. Welded joins and a specified 3 to 6 mm system are a fabricator's job. Wear gloves, hit a timber block, and do not hammer a thin roll into baked soil. A proud corten or bare galvanised top can be sharp around children and pets.

Our verdict

The top pick is the CORE EDGE 65 mm black, score 82, about £38.49, with 4.6 from 907 reviews. It ties the CORE EDGE 100 mm black on score. The 65 mm takes the badge because 907 reviews outnumber 612 and about £38.49 is the lower shelf price. It is 1.6 mm steel with integral spikes and a low face. The amazon.co.uk title does not state pack metres. The best value is the VOUNOT 10 m galvanised, score 80, about £23.49, about £2.35 per stated metre, with 4.1 from 1,114 reviews. It is the highest score at or under £30 with at least 100 reviews. The 0.7 mm panels can buckle and usually need a trench. Neither badge is a laboratory test.

Best overall
CORE EDGE 65 mm black

CORE EDGE 65 mm black

Ties on 82, then takes the badge on 907 reviews against 612 and the lower shelf price of about £38.49.

View offer
Best value
VOUNOT 10 m galvanised

VOUNOT 10 m galvanised

Highest score at or under £30 with at least 100 reviews: 80, about £23.49 for a stated 10 m.

View offer

Editorial

Peter F. - Editor
Editor
Metal lawn edgingGarden bordersamazon.co.uk listings

Peter F. is the editor for DIY & tools at productscompared.co.uk. Comparisons in this category are checked against amazon.co.uk listings, review evidence and public UK sources.

Updated: 23 October 2026
8 sources checked

Guides to metal lawn edging

Guides on what to look for, how to use a product, and common mistakes.

Related comparisons

Sources

Public UK sources for this comparison. Prices and star lines were saved from amazon.co.uk on 19 October 2026.

  1. GPDO 2015 Schedule 2 Part 2 Class A (retrieved 19 October 2026)
  2. General Product Safety Regulations 2005 (retrieved 19 October 2026)
  3. RHS: how to maintain lawn edges (retrieved 19 October 2026)
  4. EverEdge FAQs (retrieved 19 October 2026)
  5. CORE EDGE product page (retrieved 19 October 2026)
  6. Kinley: how to choose landscape edging (retrieved 19 October 2026)
  7. Straightcurve: steel lawn edging in the UK (retrieved 19 October 2026)
  8. Consumer Rights Act 2015, Part 1 Chapter 2 (retrieved 19 October 2026)

This page contains affiliate links. If you buy through these links we may earn a commission, at no extra cost to you. Scores use saved amazon.co.uk listings and public UK sources. They are not a laboratory test.