The best 1/4 inch torque wrenches, compared.
Top pick: TAGVIT 1–25 Nm Best value: INGJER 3–25 Nm – Highest value part that is not the top pick, at about £15.99 with a 3 Nm start and 622 ratings. Updated October 2026.
A 1/4 inch torque wrench has a 6.3 mm square drive. You buy one in the UK when a fastener is specified in newton-metres and a 3/8 inch or 1/2 inch wrench is too big, or its scale starts too high. The square takes 1/4 inch sockets and bits. An adapter on a larger wrench does not raise that wrench's maximum. A usable wrench has a scale that contains the bolt. A start at 6 Nm cannot be set to 4 or 5 Nm. Reversible describes the ratchet, not an anticlockwise calibration. Many click wrenches state clockwise tightening only. At a low setting the click can be quiet, and the signal may be a bend in the head. No movement at any setting is a fault. These are setting tools. You choose a number and the wrench signals. They are not beam wrenches, digital wrenches or preset keys. A printed percentage is the seller's claim, not a UKAS certificate. Range and kit are set out in the [1/4 inch torque wrench buying guide](/hub/hand-tools/1-4-inch-torque-wrench/sub/1-4-inch-torque-wrench-buying-guide).
A 1/4 inch torque wrench has a 6.3 mm square drive. You buy one in the UK when a fastener is specified in newton-metres and a 3/8 inch or 1/2 inch wrench is too big, or its scale starts too high.
36 products checked · 61 hrs invested · +22,800 readers
Swipe for more
1-2 of 10
Personal buying guide
Question 1 of 2
What is the lowest figure you need to set?
The TAGVIT title says a 1/4 inch wrench from 1 to 25 Nm at £18.99, and the jaw field is 0.25 inches. The bullets repeatedly call it a 3/8 inch drive and describe a click test above 50 lbf·ft, which sits outside a 1–25 Nm tool. Amazon shows 5.0 from two reviews, and neither review describes a fault or a measured result. The title says 3Pcs while the number-of-items field is 1, and the included line names a wrench, a 72-gear and a ratchet head rather than three tools. A two-year assurance line is printed. Two ratings are too few to treat that 5.0 as a workshop result. The drive conflict is why this row scores 44 and carries no badge.
Pros
Cons
Best for: You will open the box and confirm a 1/4 inch square before you rely on the 1–25 Nm title.
Less suitable: You need a listing whose drive size is the same in the title and the bullets.
Specifications
Common questions
Is this a 1/4 inch wrench?
The title says 1/4 inch drive and the jaw field is 0.25 inches. The bullets repeatedly say 3/8 drive. Both are in the same listing.
How many reviews are there?
The listing line is 5.0 out of 5 from 2 reviews. Neither review describes a fault.
The Homvvi set is £28.99 with a 33-piece title, a 2–24 Nm scale, a claimed ±3% and 0.1 Nm steps, plus a 3/8 inch adapter. Amazon shows 4.7 from 17 ratings. Of 14 reviews, owners describe a working click, a locking collar, motorbike clutch work and e-bike bars, and one mentions a calibration chart that the bullets do not print. One review states the maximum as 22 Nm rather than 24 Nm, which the file does not resolve. The adapter lets a 3/8 inch socket fit and does not raise the spring's limit. A non-sparking field says Yes with no explanation, and the included-components line is cut off. Seventeen ratings are a thin sample next to the Draper and the INGJER.
Pros
Cons
Best for: You want sockets and bits in one case for jobs inside 2–24 Nm, and you will read the scale end on the wrench itself.
Less suitable: You need a confirmed 24 Nm maximum, or a review file in the hundreds.
Specifications
Common questions
Does the 3/8 adapter raise the torque?
No. The adapter lets a 3/8 inch socket fit. The wrench scale is still 2–24 Nm.
What is in the set?
The bullet lists the wrench, a 100 mm extension, a 3/8 adapter, a universal joint, 12 hex sockets, 8 hex bits, 5 Torx bits and 3 Phillips bits.
Is 24 Nm confirmed?
The title says 2–24 Nm. One review says the maximum is 22 Nm. The file does not resolve that.
The HYCHIKA kit is £26.99 with a title range of 5–25 Nm, a claimed ±2%, a dual Nm and ft-lb scale, and hex plus Torx bits. Amazon shows 4.6 from 98 ratings. Reviewers describe a clear click on a bike build, including carbon parts, and use on an inlet manifold, stainless brake pipes and a motorcycle, with a certificate mentioned by buyers. One of 50 reviews reports no click on the bike or on a known fastener and calls that unit a dud, and another review uses the name Shovan. The included-components line says a 10 mm extension while the bullet describes a 235 mm wrench plus an extension bar. A 4 Nm bolt sits below the 5 Nm start. The ±2% sentence is the tightest claim in this set, and it was not tested here.
Pros
Cons
Best for: Your bolts sit between 5 and 25 Nm and you want bits with the tightest printed percentage here.
Less suitable: You need 2–4 Nm, or one agreed extension length on the page.
Specifications
Common questions
Does 5 Nm cover a 4 Nm bolt?
No. The title range starts at 5 Nm. A 4 Nm mark is below this wrench.
What does ±2% mean here?
It is the listing's accuracy sentence, with a claimed individual certificate. The certificate is not in the saved listing, and this comparison did not test the wrench.
Is the scale in inch-pounds?
The bullet says Nm and ft-lb, not inch-pounds.
The BGS 7181 is a bare 1/4 inch click wrench, 250 mm long, that runs from 6 to 30 Nm in 0.2 Nm steps with a stated clockwise trigger and a 72-tooth head. At £15.98 the listing also claims ±3%, a blow-mould case, a foam tray and a calibration certificate that is not shown in the file. Amazon shows 4.6 from 63 ratings. Of 30 reviews read, the English lines are short praise and do not describe a dead click or a snapped shaft. Much of that file is German, Spanish, French or Italian, so those sentences are not treated as UK shopper opinion. You cannot set a 4 or 5 Nm stem bolt on a scale that starts at 6 Nm. It is the top pick in this set because the scored total is 79, with that 6 Nm floor left in the open.
Pros
Cons
Best for: You want a named workshop wrench around £16 for bolts that sit between 6 and 30 Nm.
Less suitable: You need to set 4 or 5 Nm, or you need an anticlockwise calibration.
Specifications
Common questions
What range does the BGS 7181 cover?
The listing prints 6–30 Nm on a 1/4 inch (6.3 mm) square, with a 0.2 Nm fine scale. A bolt under 6 Nm cannot be set on it.
Does it include bits?
No. The included-components line is the wrench. The bullets add a blow-mould case, a foam tray, and a calibration certificate. The certificate is not in the saved listing.
Which way does it tighten?
The spec bullet says the trigger is clockwise. It does not state an anticlockwise calibration.
The BLUEMARS 33-piece set is £32.95 with a 2–24 Nm scale, ±3% claimed, and a bullet that warns the signal below about 10 Nm may be a shaft bend rather than a click. Amazon shows 4.6 from 10 ratings. All ten reviews were read: owners call the window right for bikes and small jobs, the case holds the pieces, and the positive lines describe a solid click, with no snap or dead click in that small sample. The bullet limits the tool to tightening and a reset to 2 Nm. The material field says high carbon steel while the bullet says 40CR and aluminium. Ten reviews cannot carry a badge. At £32.95 you are paying near the top of this shelf for a warning the cheaper listings also need you to understand.
Pros
Cons
Best for: You want the low-torque warning printed on the listing and a 2 Nm start, and you accept a ten-review sample.
Less suitable: You need a large review count, or a wrench you can use to undo a seized bolt.
Specifications
Common questions
Why might there be no loud click?
The listing says that below about 10 Nm you may feel the shaft deflect instead of hearing a click, and that you should turn slowly. It says the click is louder higher up the scale.
What is the reset point?
The bullet says return the knob to 2 Nm and do not wind it below the minimum scale.
Can it loosen a stuck bolt?
No. The bullet says tightening only, and not to use it on seized or over-torqued bolts.
The Draper 78639 is a 1/4 inch micrometre wrench from 5 to 25 Nm at £27.49, sold with a blow-mould case and no bits. Amazon shows 4.5 from 992 ratings, the largest count in this set. Reviewers use it for glow plugs and other low figures a bigger wrench will not reach, and some say the click or the bend becomes obvious once you know to feel for it, including on an electric mountain bike. The bullet limits it to clockwise right-hand threads, while the title says reversible. Several of 50 reviews say the click is soft near 5 Nm, the lock loosens, and sockets fall off the square. One review says no calibration certificate was in the box, and the instructions' worked example is 96 Nm, which is outside 5–25 Nm. There is no ± figure in the three bullets, so the review volume does not make this the top pick.
Pros
Cons
Best for: You want a widely reviewed bare wrench for clockwise jobs between 5 and 25 Nm, and you will feel for the give near 5 Nm.
Less suitable: You need bits, an anticlockwise setting, or a loud click at the bottom of the scale.
Specifications
Common questions
Can the Draper undo bolts?
The bullet says clockwise right-hand threads only. The title says reversible. The bullet is the direction limit.
Why do reviews mention a quiet click?
Several of the 50 reviews read say the click is soft near 5 Nm, and that you have to feel the give. Others describe a loose lock or sockets that fall off the square.
Is there a percentage on the listing?
No ± figure is in the three bullets. One review says no calibration certificate was in the box.
The FOURROBBER kit is a 1/4 inch click wrench from 2 to 20 Nm at £26.99, with ±3% claimed and ISO 6789, GB/T 15729 and ASME B107.14M named without a year. The 30-piece bullet lists hex, Torx, slotted, Phillips, Pozidriv and nut drivers, plus a protective case and a certificate that is not in the file. Amazon shows 4.5 from 16 ratings. Of 14 reviews, bike owners praise a clear click and colour-coded bits, one buyer returned the kit because nothing fitted that bike, and several say they cannot check the marks. The number-of-items field is 6 against the 30-piece claim, and the manufacturer line prints FOURRROBER. A fastener above 20 Nm is off this scale, which is why the row stays a conditional kit rather than a badge.
Pros
Cons
Best for: You want a 2–20 Nm bike kit and you will match the bits to your bolts before you need them.
Less suitable: You need a scale above 20 Nm, or a review file larger than 16 ratings.
Specifications
Common questions
How high does it go?
The title and the bullet say 2–20 Nm. A fastener above 20 Nm is off this scale.
What standards does the listing name?
ISO 6789, GB/T 15729 and ASME B107.14M, plus a later ASME and ANSI line. No part number or year is printed. A calibration certificate is claimed and is not in the file.
Did every bit fit?
One of 14 reviews says the kit was returned because nothing fitted that bike. Other reviews describe the bits as a useful bike selection.
The ss shovan 33-piece set is £32.99 with a 3–25 Nm bullet and no ± figure in the text read. Amazon shows 4.4 from 119 ratings. Positive reviews describe a clear click on a bike rebuild and motorbike Torx screws under 30 Nm, and one owner wanted the scale to reach 1–2 Nm. The same 46 reviews include a wrench that snapped in two on first use, one that broke at a stated 13 Nm, one with no click at all, a missing 2.5 mm bit replaced by two 3 mm bits, and attachments called soft metal. The dual scale is printed as 3–25 Nm (8.9–221.3 in-lb). About 221 in-lb matches 25 Nm, while about 8.9 in-lb is 1 Nm, not 3 Nm. The bullet says tightening only and that a low setting may feel like a bend. Those breakages take the full defect deduction, so the row scores 41.
Pros
Cons
Best for: You want the 33-piece kit for bolts from 3 Nm upward and you will try the click on scrap first.
Less suitable: You need 1–2 Nm, a printed percentage, or a sample without a first-use snap.
Specifications
Common questions
Does it cover 1 Nm or 2 Nm?
The range bullet starts at 3 Nm. One review wanted 1 Nm and 2 Nm fasteners and said this set does not reach them.
What does the listing say about a quiet click?
It says that at low torque you may feel the shaft bend instead of hearing a click, and that the click gets louder as the setting rises. Turn slowly.
Are there failure reports?
Yes. In the reviews read: snapped in two on first use, broke at a stated 13 Nm, no click at all, a missing 2.5 mm bit with two 3 mm bits, and bits called soft metal.
The INGJER listing is a bare 1/4 inch click wrench from 3 to 25 Nm at £15.99, with 4.3 from 622 amazon.co.uk ratings and a printed three-year warranty line. The bullet claims ±3% clockwise, a 72-tooth reversible ratchet, a storage box and a precision report. Reviewers use it on mountain-bike bolts, glow plugs including a Renault Kadjar, a wing mirror and an outboard head, and one says a calibration house found that unit on spec. The same 50 reviews include a quiet or absent click, a notchy ratchet, one unit that arrived in pieces and one that broke the first time it was used. The item-torque field prints 240 inch-pounds while the bullet talks about foot-pounds and Nm, and the listed weight is 181 g against a review estimate of about 245 g. It is best value here because the value part of the score is 16, the highest among the rows that are not the top pick, and the 3 Nm start covers bolts the BGS cannot be set for. Those failure reports are why it does not take the top-pick badge.
Pros
Cons
Best for: You want a £15.99 wrench that can be set from 3 Nm, and you will check the click before a critical bolt.
Less suitable: You need bits in the box, or a review sample with no broken-on-arrival report.
Specifications
Common questions
Does the INGJER come with sockets?
No. The included line is the 1/4 inch wrench, a manual, a precision report and a storage box. Reviews also say there are no attachments.
Is the click always loud?
The bullet promises a loud click. Reviews include both a clear click and reports of no nice click. Separate reviews say one unit arrived broken and one broke on first use.
What should it be stored at?
The bullet says adjust the scale down to the lowest setting after use. It does not print that number.
The AivaToba kit is £19.99 with a title range of 2–24 Nm, a claimed ±3% and 0.1 Nm steps, plus hex and Torx bits named for a bike. Amazon shows 3.8 from 320 ratings, the lowest star line in this set. Positive reviews describe building bikes and call those bit sizes useful. Several of the 50 reviews say there is no click even at the minimum, one headset was broken while the owner waited for a click, and separate reviews say the wrench broke after two or three uses. The set-name field says 33 pieces, the bullet says 13, and one review says 43. The usage bullet limits it to final tightening and a reset to 2 Nm. Repeated no-click reports are why it is not badged.
Pros
Cons
Best for: You already have a way to check the click, and you want the named hex and Torx bits at about £20.
Less suitable: You will trust a silent pull on a carbon stem or a headset.
Specifications
Common questions
What bits are listed?
The bullet lists hex H2, H2.5, H3, H4, H5, H6, H8 and H10, plus Torx T20, T25 and T30, and a 100 mm extension, with the wrench.
Do the reviews say it clicks?
Some say it does. Several say there is no click even at the minimum, and one says a headset was broken while waiting for a click. Separate reviews say it broke after two or three uses.
Can it loosen bolts?
The usage bullet says final tightening only, and to reset it to 2 Nm afterwards.
Ten 1/4 inch click wrenches on amazon.co.uk were scored from the listings in this folder, taken on 19 October 2026. Shelf prices, stars and review counts are those UK pages. There was no lab test and no torque bench. A ± figure is the claim printed on the listing. The score is 0–100 from stars, sample size, listing clarity and value in this set. Defect reports take off up to 15 points and are not a fifth weight. The top pick is the only score of 79. Best value is the highest value part that is not the top pick.
Stars
30%Amazon rating divided by 5, times 30, rounded to the nearest whole number. 4.6 becomes 28. The figure is the UK listing, not a lab grade.
Sample
25%800 or more ratings score 25, and fewer than 8 score 2, with steps between. A thin sample is already counted here.
Listing clarity
25%Direction, a printed ±2% or ±3%, a fine scale, 72 teeth, a case, a certificate line, and length plus one credible weight, taken from the bullets.
Value in this set
20%One price band in this set only, from the shelf price beside what the listing prints. The highest value part that is not the top pick is best value.
Match the bolt before the price. The newton-metre figure has to sit on the scale, the square has to be 1/4 inch, and a reversible ratchet is not an anticlockwise calibration. The notes below follow that order for these ten amazon.co.uk listings. None of the scores is a torque-bench test.
A 1/4 inch torque wrench is a setting tool with a 6.3 mm square. You set a newton-metre figure and the wrench signals, usually with a click, when you reach it. UK buyers use one when the fastener is specified in newton-metres and a 3/8 inch or 1/2 inch wrench is too big or starts too high. Sockets and bits for that square fit the drive. A 3/8 inch adapter on a larger wrench does not raise the spring's maximum. The bolt has to sit on the scale.
The bolt has to sit on the scale. A wrench that starts at 6 Nm cannot be set to 4 or 5 Nm. Park Tool's typical threadless-stem figure is 4–6 Nm, and the mark on the part wins.
A 3/8 inch adapter lets a larger socket fit. It does not raise the spring's maximum. If the title says 1/4 inch and the bullets say 3/8 inch, the listing has not agreed the drive.
A quiet click at low Nm can be normal. No movement at any setting is a fault. Stop, and do not undo a seized bolt on the scale. Read ft-lb and inch-pounds as different units from Nm.
Put the bolt's figure on the scale before you look at the price. The windows kept here are 1–25, 2–20, 2–24, 3–25, 5–25 and 6–30 Nm. A 6–30 Nm wrench cannot be set to a 4 or 5 Nm stem bolt. Park Tool calls 4–6 Nm a typical threadless-stem figure, and the mark printed on the part wins. If the bar and the stem disagree, use the lower number. A UK rule of thumb puts bicycles around 2–25 Nm and an engine bay around 20–200 Nm, which is why these wrenches do not cover wheel nuts.
The signal at a low setting is easy to misread. Park Tool says the click may be almost silent and that the head deflection is what you feel. A listing can warn of a bend rather than a click below about 10 Nm. That warning is not the same as no movement at any setting, which is a fault. Do not use the wrench as a breaker bar, and do not undo a seized bolt inside the scale. Norbar's points are the minimum mark, never zero, and one click.
Three typical situations, each with a recommendation from this comparison.
You want a named bare wrench for fasteners that sit between 6 and 30 Nm, and you do not need 4 or 5 Nm. The BGS 7181 is about £15.98, with 0.2 Nm steps, a clockwise trigger, a case and a claimed certificate, and 4.6 from 63 reviews. The score is 79. A bolt under 6 Nm is off this scale.
You need to set from 3 Nm, including small fasteners a 6 Nm floor will not reach, and you will check the click before a critical bolt. The INGJER wrench is about £15.99, 3–25 Nm, with 4.3 from 622 reviews. Breakage and a quiet click are in the sample, which is why it is best value and not the top pick.
You want hex, Torx and sockets for bolts from 2 Nm, and you will read the scale end on the wrench. The Homvvi set is about £28.99, titled 2–24 Nm, with a 3/8 inch adapter that does not raise the spring, and 4.7 from 17 reviews. One review says the maximum is 22 Nm, not 24 Nm.
In this set of ten amazon.co.uk listings, the top pick is the BGS 7181 at about £15.98: 6–30 Nm, 0.2 Nm steps, a clockwise trigger, a case and a claimed certificate, with 4.6 from 63 reviews and a score of 79. The best value is the INGJER wrench at about £15.99, because its value part is 16, the highest among the rows that are not the top pick, and the 3 Nm start covers bolts the BGS cannot be set for. Breakage reports keep the INGJER off the top-pick badge. A 4 or 5 Nm bolt needs a scale that starts lower than 6 Nm. None of these scores is a lab test, and none of these wrenches covers a car wheel nut.
INGJER 3–25 Nm
Highest value part that is not the top pick, at about £15.99 with a 3 Nm start and 622 ratings.
Editorial
Peter F. is the editor for DIY & tools at productscompared.co.uk. Comparisons in this category are checked against amazon.co.uk listings, review evidence and public UK sources.
Guides on what to look for, how to use a product, and common mistakes.
Public sources from the research digest, last checked on 19 October 2026. Shelf prices, stars and review counts are the amazon.co.uk figures in the display file, not a live check.
This page contains affiliate links to amazon.co.uk. If you buy through them, we may earn a commission at no extra cost to you. Prices, stars and review counts are from the UK listings in this comparison. We did not lab-test these torque wrenches.
