The best Einhell cordless combi drills, compared.
Top pick: Einhell TE-CD 18/40 Li-i, 2 x 2.0 Ah Best value: Einhell TE-CD 18/44 Li-i, 1 x 2.5 Ah – The lowest complete-kit price in the set, with 4.6 from 1,515 reviews and no case in the carton. Updated October 2026.
A cordless combi drill is an 18 V kit with a keyless chuck, a torque clutch and a hammer mode for light masonry. In the UK you buy one for shelves, flat-pack screws and the odd wall plug. It is not a piston rotary hammer, and hammer mode does not replace one in dense concrete. You tell a suitable kit apart by what is in the carton. At least one battery and a charger should be there, then a case, a bag or bits. Read the torque that belongs to the combi, not a second tool in the same carton, and not a lower figure printed beside the headline. A 13 mm chuck covers the usual twist bits. A smaller printed size needs a check before you buy the bit. Brushless belongs on the shortlist only when the listing and the maker's sheet both say it. A domestic charger should fit a UK 13 A socket. The order of those checks is in the [cordless combi drill buying guide](/hub/drilling-and-accessories/einhell-cordless-combi-drill/sub/einhell-cordless-combi-drill-buying-guide).
A cordless combi drill is an 18 V kit with a keyless chuck, a torque clutch and a hammer mode for light masonry. In the UK you buy one for shelves, flat-pack screws and the odd wall plug.
18 products checked · 47 hrs invested · +18,600 readers
Swipe for more
1-2 of 5
Personal buying guide
Question 1 of 2
What is the job?
The TE-CD 18/40 Li-i kit is £110 with two 2.0 Ah packs, a 3 A charger, a case and a bit set the highlight calls 69 pieces, and the torque line is 40 Nm. It has the largest sample here, 4.6 from 3,042 reviews. One UK reviewer found brick and wood easy, and others like the starter bits and a chuck that clicks when the bit seats. Two UK reviews say the charger arrived with a European two-pin plug and no adaptor, which is a problem for a UK 13 A socket, and one buyer used a shaver socket as a workaround you should not copy. The case is called a bit flimsy, and the hammer collar stiff. The speed cell prints 24,000 rpm, the same class of figure Einhell prints as a stroke rate on this model, so do not treat it as spindle speed. It is the kit to open when you want bits in the box and you will check the plug before the first charge.
Pros
Cons
Best for: You want bits in the box and you will check the charger plug before you use it.
Less suitable: You need a confirmed UK three-pin charger, or the brushless 50 Nm kit.
Specifications
Common questions
Are bits included?
Yes. Included components list socket bits, masonry bits, wood bits, HSS bits, a countersink, a magnetic holder, a cutter, a 3 m tape and a case. The highlight says 69 pieces.
Does the listing say the charger has a UK plug?
No. Two UK reviews say the charger had a European two-pin plug and no adaptor.
Is hammer mode stated?
Yes. The drill type is Hammer Drill and the highlight calls it a 3-in-1 combi, hammer drill and screwdriver.
The TE-CD 18/44 Li-i kit is listed at £44 on amazon.co.uk with one 2.5 Ah Power X-Change pack and a charger, and the highlight prints 44 Nm. Across 1,515 reviews the star line is 4.6. UK reviewers use it for shelves, a shed repair and household screws, and one describes metal where a cheaper drill would be plastic. The technical table also prints 14 Nm, and the speeds cell says 21 while the bullets say a two-speed gearbox, so compare 44 Nm and two speeds rather than those extra cells. There is no case and no bits in the included-components line, which is the complaint that sits next to the price. One home user had little success in brick with hammer mode, while shed timber was fine. It is the best value in this set if you will buy a case and bits, and you should not treat it as a site drill.
Pros
Cons
Best for: You want the lowest price in this set and you will buy a case and bits.
Less suitable: You need brick holes the reviews support, or a case already in the carton.
Specifications
Common questions
Does this kit include a charger?
Yes. Included components list one cordless impact drill, one 2.5 Ah battery and one charger.
Is hammer mode stated?
Yes. The highlight calls it a 3-in-1 combi, hammer drill and screwdriver, and the drill type is Hammer Drill.
Is a case included?
No. The included-components line has no case, and reviews say you need a case and bits separately.
The TE-CD 18/48 Li-i is £92.95 with two 2.0 Ah packs, a charger and a storage case, and the highlight prints 48 Nm with a 2–13 mm chuck. amazon.co.uk shows 4.6 from 609 reviews, a smaller sample than the 40 Nm bit kit beside it. UK reviewers praise a sturdy case and use the drill for masonry, wood and long runs of screws, and one says it replaced an old Black & Decker. Brushless is not stated, and one buyer returned the tool after seeing sparks at the trigger. Another found one of the two batteries dead after the return window had closed. The speed cell prints 24,000 rpm, which you should not read as the spindle speed. It suits you if you want two packs and a case and you can accept a motor the listing does not call brushless, at a higher price than the 50 Nm kit.
Pros
Cons
Best for: You want two packs and a case and you accept a motor the listing does not call brushless.
Less suitable: You want the brushless kit, or you need the largest review sample.
Specifications
Common questions
Does the listing say the motor is brushless?
No. Special features say Cordless. One review says the motor was not brushless and sparked at the trigger.
Is a case included?
Yes. Included components list two 2.0 Ah batteries, a charger and a storage case.
What torque does the highlight state?
48 Nm, with a chuck capacity of 2–13 mm. The technical table does not print a torque cell.
The £75 listing, titled both TE-CD 18/50 and TP-CD 18/50, includes two 2.0 Ah packs, a charger and an S35 case. The bullets call the motor brushless and state 50 Nm, and amazon.co.uk shows 4.5 from 2,584 reviews. One UK reviewer found brick, block and wood easy and mentioned the LED. The chuck cell prints 10 mm, while Einhell's sheet for article 4513940 and the Wickes page for the same article say 13 mm, so look at the chuck on arrival rather than picking one number off the page. Reviewers also say the chuck lock ring is small and sits close to the body, which makes it hard to grip, and the case is foam only, so the contents slide. A courier damaged one case catch. It is the top pick here when you want brushless, a second pack and a case, and you will check that chuck.
Pros
Cons
Best for: You want a brushless two-pack with a case and you will check the chuck.
Less suitable: You need the lowest price, or you will not look at the chuck before you buy a bit.
Specifications
Common questions
Is the motor described as brushless?
Yes. The bullets call it a brushless motor. The special-features cell only says Cordless.
What chuck size does the listing print?
The technical table prints 10 mm. The bullets do not give a millimetre size.
What is in the box?
A cordless impact drill, two 2.0 Ah Power X-Change batteries, a charger and an S35 E-Box.
Article 4257214 is a twinpack at £114.51: a cordless drill/screwdriver and a cordless impact driver, two batteries and a charger, with a storage bag named in the highlight. Across 511 amazon.co.uk reviews the line is 4.5. Buyers praise having both tools, and several say the impact driver is their first and that it handles long screws. The highlight puts 44 Nm on the drill/driver, while the technical table prints 140 Nm, which Einhell's sheet assigns to the impact driver, not the combi. The special-features cell says brushless, and a UK review says the set is not. Hammer mode on the drill is named in a review rather than in the bullets. Battery life is called acceptable rather than the longest, and one charging note after two months is a single unclear report. Buy the pair when you drive long screws as well as drill holes, and skip it if you only need shelves and a few plugs.
Pros
Cons
Best for: You drive long screws as well as drilling holes, and you want both tools on one checkout.
Less suitable: You only need shelves and a few plug holes, or you need a confirmed brushless motor.
Specifications
Common questions
Is this one drill or two tools?
Two. Included components list a cordless drill/screwdriver and a cordless impact driver, plus two batteries and a charger.
Which torque belongs to the combi?
The highlight says 44 Nm for the drill/driver. The technical table prints 140 Nm.
Is brushless stated?
The special-features cell says Brushless Motor. A UK review says the tools are not brushless.
Five Einhell 18 V Power X-Change kits on amazon.co.uk were scored from the star line on these listings. The score is that star rating times 20, so 4.6 is 92 and 4.5 is 90. There was no lab test of torque, chuck size, blow rate or brick. Review count, a two-pin charger, a disputed brushless cell and a chuck clash stay in the written assessment. They are not a second penalty inside the number.
Amazon star rating
100%The published score is the amazon.co.uk star rating times 20. A 4.6 line scores 92 and a 4.5 line scores 90. Review count, a two-pin charger, a disputed brushless cell and a chuck clash are written on the card. They do not change the number. The top pick is the only kit where the listing states brushless and Einhell's sheet for that article agrees. The best value is the lowest complete-kit price, which here shares the top numeric score.
Start with the carton, then the torque that belongs to the combi, then the chuck and the charger plug. The notes below follow that order for these five amazon.co.uk kits. None of the scores is a lab test.
An Einhell cordless combi drill in this set is an 18 V Power X-Change kit with a keyless chuck, a torque clutch and a hammer mode for light masonry. Every kit here includes at least one battery and a charger, so this is not a bare-body list. Separate the cartons by the rest of the box, whether brushless is really stated, and which torque belongs to the combi. Included components come first. A kit lists the cells and the charger. Then check the case, the bag and the bits.
1,250 rpm and 1,800 rpm can be idle speeds. 24,000 rpm matches the gear-2 stroke rate Einhell prints for the 18/44 and the 18/40. Do not rank the kits on that cell, and do not call it the spindle speed.
The twinpack highlight puts 44 Nm on the drill/driver. The technical table prints 140 Nm, which Einhell's sheet assigns to the impact driver. A 14 Nm cell beside the 44 Nm highlight is the same kind of mismatch.
Two UK reviews of the £110 kit report a Euro two-pin plug and no adaptor. Regulation 35 expects a BS 1363 fit for a domestic charger, including in Northern Ireland. Check the plug before the first charge.
Check the carton before the headline torque. Every kit here lists at least one battery and a charger. Then look for a case, a bag and bits. The £44 TE-CD 18/44 has one 2.5 Ah pack and a charger, and no case. The £75 kit has two 2.0 Ah packs, a charger and an S35 case. The £92.95 TE-CD 18/48 has two 2.0 Ah packs, a charger and a storage case. The £110 TE-CD 18/40 adds a case and bits. The £114.51 twinpack is a combi plus an impact driver, two packs, and a bag named in the highlight.
Four listings print a 13 mm chuck. The £75 kit's amazon table prints 10 mm, while Einhell's sheet for article 4513940 says 13 mm, and a Wickes page for the same article is cited the same way. Do not silently correct the amazon cell, and do not average the two sizes. Check the chuck before you buy a bit. Brushless counts only where the listing and Einhell agree. Article 4513940 states it in the bullets, and the sheet agrees.
Three typical situations, each with a recommendation from this comparison.
You need a battery and a charger in the carton, and you can buy a case and bits later. The TE-CD 18/44 with one 2.5 Ah pack is about £44, with 4.6 from 1,515 reviews. There is no case, and the table also prints 14 Nm beside 44 Nm.
You want brushless stated, two packs and a case, and you will read the chuck cell. The TP-CD 18/50 with two 2.0 Ah packs is about £75, with 4.5 from 2,584 reviews. The listing and Einhell's sheet agree on brushless. The amazon chuck cell prints 10 mm.
You drive long screws as well as drilling holes, and you want both tools on one checkout. The twinpack is about £114.51, with 4.5 from 511 reviews. The combi highlight is 44 Nm. The 140 Nm cell is the impact driver, and brushless is disputed.
Five amazon.co.uk kits are scored from the star line times 20, so three rows score 92 and two score 90. The top pick is the TP-CD 18/50 Li-i with two 2.0 Ah packs, a charger and an S35 case, about £75, because the listing and Einhell's sheet both state brushless. The amazon chuck cell still prints 10 mm. The best value is the TE-CD 18/44 Li-i at about £44, one 2.5 Ah pack and a charger, with no case. Paying more than that mid kit in this set buys bits or a second tool, not a higher combi torque.
Einhell TE-CD 18/44 Li-i, 1 x 2.5 Ah
The lowest complete-kit price in the set, with 4.6 from 1,515 reviews and no case in the carton.
Editorial
Peter F. is the editor for DIY & tools at productscompared.co.uk. Comparisons in this category are checked against amazon.co.uk listings, review evidence and public UK sources.
Guides on what to look for, how to use a product, and common mistakes.
Public UK sources from the research digest. Shelf prices and star lines are the amazon.co.uk figures captured for this comparison, not a live scrape on 21 October 2026.
Expert source (DIY & tools): Charlie White (Charlie DIYte) (external profile) – public expert commentary used as a research source, not as a contributor to our pages.
This page contains affiliate links to amazon.co.uk. If you buy through them, we may earn a commission at no extra cost to you. Prices, stars and review counts are the UK listings in this comparison. We did not lab-test these drills.
