Independent comparisons. We may earn from shop links. Our editors compare products independently. Some links go to shops, and we may earn a commission. More info
Top pick: Milwaukee 2415-20 M12 right angle drill – Highest star line in the set, 4.7 from 1,643 ratings, with 11 clutch settings plus drill mode and a 3/8-inch ratcheting chuck, at about £85.50 for the bare body. Best value: Einhell TE-AD 18 Li – Bare-body price close to the kit, the highest stated torque in the set at 45 Nm, and a clear UK share in the first 50 written reviews. Updated October 2026.
A right angle drill has the chuck at about 90 degrees to the grip, so the head enters a cabinet, joist bay or engine bay where a straight drill hits the side first. In the UK you mainly buy it as a bare cordless body on a 12 V or 18 V platform, though some listings are kits that name a battery. You judge a suitable one by head length with the bit fitted, a chuck that locks, a battery you can replace, and a listing that says whether the pack is in the box.
The length on the listing includes the handle. The gap that matters is the chuck plus the bit. On compact tools, expect a keyless chuck of about 10 mm, and read torque separately from any clutch. These are basic drills, so masonry is the wrong job. A gearbox that borrows a drill you already own is an attachment, not this tool.
The checks for head, chuck and battery are in the [right angle drill buying guide](/hub/drilling-and-accessories/right-angle-drill/sub/right-angle-drill-buying-guide).
A right angle drill has the chuck at about 90 degrees to the grip, so the head enters a cabinet, joist bay or engine bay where a straight drill hits the side first.
A right angle drill has the chuck at about 90 degrees to the grip, so the head enters a cabinet, joist bay or engine bay where a straight drill hits the side first. In the UK you mainly buy it as a bare cordless body on a 12 V or 18 V platform, though some listings are kits that name a battery. You judge a suitable one by head length with the bit fitted, a chuck that locks, a battery you can replace, and a listing that says whether the pack is in the box.
The length on the listing includes the handle. The gap that matters is the chuck plus the bit. On compact tools, expect a keyless chuck of about 10 mm, and read torque separately from any clutch. These are basic drills, so masonry is the wrong job. A gearbox that borrows a drill you already own is an attachment, not this tool.
The checks for head, chuck and battery are in the [right angle drill buying guide](/hub/drilling-and-accessories/right-angle-drill/sub/right-angle-drill-buying-guide).
A right angle drill has the chuck at about 90 degrees to the grip, so the head enters a cabinet, joist bay or engine bay where a straight drill hits the side first. In the UK you mainly buy it as a bare cordless body on a 12 V or 18 V platform, though some listings are kits that name a battery. You judge a suitable one by head length with the bit fitted, a chuck that locks, a battery you can replace, and a listing that says whether the pack is in the box. The length on the listing includes the handle. The gap that matters is the chuck plus the bit.
The Milwaukee 2415-20 is the highest-scoring tool in this set, at 4.7 from 1,643 amazon.co.uk ratings and £85.50 for the bare body. It lists 100 in-lb, about 11.3 Nm, 800 rpm, a 3/8-inch ratcheting chuck, and 11 clutch settings plus drill mode, which is a clutch rather than an 11-speed gearbox. The listing gives 25 mm in wood and 9.5 mm in metal, at 1.01 kg, and the box is the unit plus an instruction guide, with no M12 pack. Only three of the first 50 written reviews are from the United Kingdom, so the 1,643 count is not a British sample. The longer reviews, mostly from the United States and Canada, mention tight cabinets, a useful clutch, and torque that is limited next to an impact driver. One review warns of a pinch at the guard if you use the trigger while changing bits. It is the top pick here when you already own M12 batteries and you want that clutch, and it is a poor only-drill for open-space work.
Pros
4.7 from 1,643 amazon.co.uk ratings, the highest in this set
11 clutch settings plus drill mode, and a 3/8-inch ratcheting chuck
1.01 kg, with 25 mm in wood and 9.5 mm in metal listed
LED and an on-board fuel gauge in the bullets
About £85.50 bare, below the C12 RAD-0 in this set
Cons
No battery in the box
Stated torque is about 11.3 Nm, below the Einhell 45 Nm
Only three of the first 50 written reviews are from the UK
Pinch risk at the guard if the trigger is used while changing bits
Best for: You own M12 packs and you want a clutch for screws in cabinets.
Less suitable: A first kit with no batteries, masonry, or long coach screws that need an impact driver.
At £49.99 the Einhell TE-AD 18 Li is a bare 18 V body that states 45 Nm, 1,100 rpm and a 10 mm chuck, and amazon.co.uk shows 4.6 from 464 ratings. In the first 50 written reviews, 22 are from the United Kingdom, covering airing-cupboard shelves, a battery that swivels, an LED that stays on, and work between joists. One UK reviewer reported a 25 mm hole in a steel door after a 12 V Milwaukee angle drill stalled, while the amazon listing still states 10 mm in wood and 10 mm in metal, so that hole is one job rather than the catalogue figure. You need an Einhell Power X-Change pack already, because the title says without battery and the charger is sold separately. The amazon listing has no clutch-stage count, and one reviewer wished it were brushless and an impact driver. The 18 A and 650 W cells do not agree with each other, so they are not a wattage you can use. If you already own Power X-Change packs, this is the best value in the set, at a body price close to the kit.
Pros
45 Nm and 1,100 rpm at about £49.99 for the body
4.6 from 464 amazon.co.uk ratings, with a clear UK share in the first 50 written reviews
10 mm quick-release chuck, LED and a rotating battery holder
Einhell UK states a metal transmission and 1.22 kg, with no battery in the box
Cons
Bare body: no battery and no charger
Amazon states 10 mm in wood and 10 mm in metal, while Screwfix lists 35 mm in wood for the same TE-AD
No clutch stages on the amazon listing
Not an impact driver, and not claimed as brushless
Best for: You already own Einhell Power X-Change packs and you want the highest stated torque in this set.
Less suitable: A first drill when you own no batteries, masonry, or a hole you need stated above the 10 mm amazon cell.
The Milwaukee C12 RAD-0 is listed at £99.99 on amazon.co.uk, and the first bullet calls it a 12 V bare unit, with 4.5 from 205 ratings. The UK written notes are short: tight spaces, not too heavy, solid, and no case. One UK buyer found the body about 13 inches long and larger than the photo, and a 2020 UK review says the depth that matters is the head with a bit fitted, using packs already owned. The listing prints 12 Nm, 800 rpm, 22 mm in wood and 10 mm in metal. The chuck cell of 30 mm and the weight cell of 100 g do not describe this compact body, so they are not usable figures, while Screwfix states a 10 mm keyless chuck and 1.1 kg without battery for the same C12RAD-0. Other reviews, mostly outside the UK, say the direction switch is awkward, and in one case reverse failed until the switch was opened, which is a seller repair if the tool is still covered. A 2 Ah cell sits beside the bare-unit bullet, so do not assume a battery is in the box.
Pros
4.5 from 205 amazon.co.uk ratings
Listing capacities of 22 mm in wood and 10 mm in metal
UK reviews describe tight spaces and a body that is not too heavy
The same C12RAD-0 bare body is £99.99 including VAT at Screwfix
Cons
Bare unit at about £99.99, and a UK review says there is no case
Amazon chuck cell of 30 mm and weight cell of 100 g are not usable
Direction switch is awkward in reviews, and one reverse failure needed the switch opened
One UK buyer found the body larger than the photo
Best for: You already own M12 packs and you want the current C12 RAD bare body.
Less suitable: Anyone who needs a battery in the box, or a chuck size taken from the amazon 30 mm cell.
The first bullet calls it a bare unit. A separate cell says 2 Ah. The included line does not name a battery, so do not assume a pack is in the box.
Why is the C12 RAD chuck left blank?
The listing prints 30 mm. That cell conflicts with a compact 12 V body, so this comparison does not use it. Screwfix states a 10 mm keyless chuck for the same C12RAD-0.
Is a case included with the C12 RAD-0?
A UK review says there is no case. The included line lists cardboard and the drill.
The XIIW KBD03 is the only listing in this set whose title names a 12 V 2.0 Ah battery, at £47.99, with 18 Nm, two speeds and an 880 rpm maximum. Written reviews describe it reaching eaves, drawer slides, cabinets and dashboards, and the price is meant to include the pack and charger, though the included-components line only names the drill. The chuck has no separate lock, and more than one buyer said the supplied bits failed or that five arrived rather than the 13 in the highlight. The pack does not fit a Milwaukee or DeWalt tool, and two buyers could not find a spare from the seller. Amazon shows 3.8 from 28 ratings; the written reviews checked are from the United States and Germany, so that figure is not a UK sample. Some buyers found it weak or heavier than the photos, and the listing states no wood or metal capacity. It is a basic drill, with no hammer mode.
Pros
About £47.99 with a 12 V 2.0 Ah pack named in the title
18 Nm, two speeds, 880 rpm and a 10 mm keyless chuck
Written reviews describe eaves, cabinets, drawer slides and dashboards
About 50 minutes claimed, depending on work
LED claimed in the bullets
Cons
3.8 from 28 ratings, and the written reviews checked are not a UK sample
Chuck has no separate lock
Spare pack was not on sale when two buyers looked, and it does not fit Milwaukee or DeWalt
Supplied bits failed for more than one buyer
Best for: You have one awkward cupboard job and you do not already own a battery platform.
Less suitable: Daily fitting, masonry, or a job that needs a spare pack from the same seller.
The title and the bullets name a 12 V 2.0 Ah lithium-ion battery. The included-components line only says the drill.
Will the XIIW battery fit a Milwaukee or DeWalt tool?
Reviews say it does not cross-fit. Buyers also could not find a spare pack from the seller.
Is the XIIW a hammer drill?
The listing calls it a basic drill. No hammer mode is printed.
How we compared
Four dedicated right angle drills on amazon.co.uk were compared on 21 October 2026 from listing facts and written review notes. This is not a lab test. The score on each card is the amazon.co.uk star rating times 20. The top pick is the highest of those scores. Best value is the bare body whose price sits next to the kit, with the highest stated torque in the set and a clear UK share among the first 50 written reviews. The five checks below are how those listings were read. They are not a second score.
1
Dedicated tool
20%
A right angle drill here has its own motor and chuck. Attachments and flexible shafts were left out of the four listings.
2
Head and chuck
20%
Head length is judged with the bit fitted. A chuck size that conflicts with the stated metal capacity is not used.
3
Battery and platform
20%
The listing has to say whether a pack is in the box, and which platform a bare body needs.
4
Torque and clutch
20%
Stated torque and clutch stages are read as separate lines. A clutch count is not a gearbox speed count.
5
Review sample
20%
Stars and review counts come from the amazon.co.uk listing. Written reviews are checked for a UK share, and a global count is not treated as a British sample.
Independent review
Last updated: October 2026
8 sources checked
Right angle drill buying guide
Start with whether the tool has its own motor, then head length with the bit fitted, then the battery platform, then torque and clutch as separate lines. A low shelf price comes after those checks. The notes below follow that order for the four amazon.co.uk listings checked on 21 October 2026. None of the scores is a drilling test.
What is a right angle drill?
A right angle drill is a drill with the chuck at about 90 degrees to the grip, so the head enters a cabinet, joist bay or engine bay where a straight drill hits the side first. UK trade counters sell it mainly as a bare cordless body on a 12 V or 18 V platform. Some amazon.co.uk listings are kits that name a battery. You judge one by head length with the bit fitted, a chuck that locks, a battery you can replace, and a listing that says whether the pack is in the box.
Best for
A householder with one awkward cupboard, who may want a kit that names a battery
A fitter who already owns Einhell Power X-Change or Milwaukee M12 packs and can buy the bare body
An employer treating the drill as work equipment, with any vibration figure taken from the manual
Not ideal for
Masonry, or any hole that needs a hammer drill
A bare body when you expected a charger and a pack in the box
A chuck size or a weight taken from the C12 listing cells of 30 mm and 100 g
Mistakes to avoid
1
Buying an adaptor instead of a drill
An attachment borrows a drill you already own and usually takes 1/4-inch hex bits. A right angle drill has its own motor and chuck. Buying one when you needed the other leaves you with the wrong tool for the gap.
2
Expecting a charger with a bare body
The Einhell title says without battery, and the charger is sold separately. Both Milwaukee titles are bare. Only the XIIW title names a 12 V 2.0 Ah pack. If the title says bare or solo, budget for a pack.
3
Quoting a conflicting listing cell
The C12 RAD listing prints a 30 mm chuck and a 100 g weight. Those cells do not describe this compact body. Screwfix states a 10 mm keyless chuck and 1.1 kg without battery for the same C12RAD-0. Do not treat the star count as a UK-only sample unless the written reviews are from the United Kingdom.
What to weigh up
Dedicated tool, head and battery
High
A right angle drill in this comparison has its own motor and chuck. An attachment borrows another drill and usually takes 1/4-inch hex bits. If the title is an adaptor or a flexible shaft, it is not one of these four tools.
Overall length on the listing includes the handle. The gap you care about is chuck plus bit. A UK review of the C12 RAD-0 says the depth that matters is the head with a bit fitted, and one UK buyer found that body about 13 inches long and larger than the photo.
Torque, clutch and chuck
High
Read torque and clutch as separate lines. Einhell states 45 Nm, 1,100 rpm and one speed, and the amazon listing has no clutch-stage count. XIIW states 18 Nm and two speeds, with an 880 rpm maximum. Milwaukee 2415-20 states 100 in-lb, about 11.3 Nm, 800 rpm, and 11 clutch settings plus drill mode. That is a clutch, not an 11-speed gearbox. The C12 RAD listing prints 12 Nm and 800 rpm.
Expect about a 10 mm chuck on compact models.
Which option suits you?
Three typical situations, each with a recommendation from this comparison.
🏠
One awkward cupboard
You have one cupboard, drawer or dashboard job and you do not already own a battery platform. The XIIW is about £47.99 with a 12 V 2.0 Ah pack named in the title, 18 Nm and two speeds. Amazon shows 3.8 from 28 ratings, and the written reviews checked are not a UK sample. The chuck has no separate lock, and the pack does not fit Milwaukee or DeWalt.
You already own Einhell 18 V packs and you want the highest stated torque in this set. The TE-AD 18 Li is about £49.99 for the bare body, 45 Nm, with 4.6 from 464 ratings and a clear UK share in the first 50 written reviews. The charger is sold separately. Amazon still states 10 mm in wood and metal.
You already own M12 packs and you want a clutch for screws in cabinets. The 2415-20 is about £85.50 bare, with 11 clutch settings plus drill mode, a 3/8-inch ratcheting chuck, and 4.7 from 1,643 ratings. Only three of the first 50 written reviews are from the United Kingdom. No battery is in the box.
A right angle drill has the chuck at about 90 degrees to the grip, so the head can enter a cabinet, joist bay or engine bay where a straight drill hits the side first. In the UK you usually buy a cordless body on a 12 V or 18 V platform, bare or as a kit that names a battery. Judge it by head length with the bit fitted, a chuck that locks, and whether a replaceable pack is in the box.
Which right angle drill is the top pick in this set?
The top pick in this set is the Milwaukee 2415-20, a bare M12 body at about £85.50 on amazon.co.uk on 21 October 2026. It has the highest star line here, 4.7 from 1,643 ratings, with about 11.3 Nm, a 3/8-inch ratcheting chuck, and 11 clutch settings plus drill mode. No M12 pack is in the box. Only three of the first 50 written reviews are from the United Kingdom. The score is the star line, not a lab test.
Which listing is the best value?
The best value is the Einhell TE-AD 18 Li at about £49.99 for the bare body, close to the kit price in this set. It states 45 Nm, 1,100 rpm and a 10 mm chuck, and amazon.co.uk shows 4.6 from 464 ratings. In the first 50 written reviews, 22 are from the United Kingdom. You need a Power X-Change pack, and the charger is sold separately. Amazon states 10 mm in wood and metal. One UK review reported a larger steel-door hole. That is one job, not the catalogue figure.
Does a right angle drill include a battery?
Only the XIIW listing names a 12 V 2.0 Ah pack in the title, at about £47.99. Reviews say that pack does not fit a Milwaukee or DeWalt tool, and two buyers could not find a spare from the seller. The Einhell title says without battery, and the charger is sold separately. The Milwaukee 2415-20 is a bare tool, with the unit and an instruction guide. The C12 RAD-0 first bullet calls it a bare unit. Do not assume a battery is in that box.
Can a right angle drill drill masonry?
No. These four listings are basic drills. No hammer mode is printed, so brick and concrete are the wrong job. They are for screws, pilot holes and small twist bits where a straight drill will not fit. Masonry needs a rotary hammer. At work, PUWER 1998 still requires equipment that is suitable and maintained. Wear eye protection, because your face is close to the chuck.
How is a right angle drill different from an attachment?
A right angle drill has its own motor and a chuck at about 90 degrees. A right angle drill attachment is a gearbox that borrows a drill you already own, and it usually takes 1/4-inch hex bits. Buying the adaptor when you needed the drill, or the drill when a short hex adaptor would do, is a common mistake. Flexible shafts sit with the attachments, not with these four tools. The right angle drill attachment comparison is that gearbox, not a complete drill.
Are the star ratings a UK-only sample?
No. The XIIW line is 3.8 from 28 ratings, and the written reviews checked are from the United States and Germany. The Milwaukee 2415-20 line is 4.7 from 1,643 ratings, and only three of the first 50 written reviews are from the United Kingdom. The Einhell line is 4.6 from 464 ratings, and 22 of those first 50 are from the United Kingdom. Read each star count with that split. It is not a British-only poll.
When should you call a professional?
Call a professional for a consumer unit, for holes near pipes, or through a structural joist you have not checked. Also call one for a daily vibration job when the manual states no vibration figure, and for a failed direction switch while the seller still covers the tool. None of these four listings prints a vibration or noise figure. At work the action value is 2.5 m/s² A(8) and the limit is 5 m/s² A(8). Gloves do not subtract vibration.
Our verdict
In this set of four amazon.co.uk listings, checked on 21 October 2026, the top pick is the Milwaukee 2415-20 at about £85.50. It has the highest star line, 4.7 from 1,643 ratings, with about 11.3 Nm, a 3/8-inch ratcheting chuck and 11 clutch settings plus drill mode. The battery is not included, and only three of the first 50 written reviews are from the United Kingdom. The best value is the Einhell TE-AD 18 Li at about £49.99 for the bare body, with 45 Nm and 4.6 from 464 ratings, including a clear UK share in those written reviews. Amazon still states 10 mm in wood and metal. None of these scores is a lab test.
Best overall
Milwaukee 2415-20 M12 right angle drill
Highest star line in the set, 4.7 from 1,643 ratings, with 11 clutch settings plus drill mode and a 3/8-inch ratcheting chuck, at about £85.50 for the bare body.
Cordless drillsDrilling and accessoriesamazon.co.uk listings
Peter F. is the editor for DIY & tools at productscompared.co.uk. Comparisons in this category are checked against amazon.co.uk listings, review evidence and public UK sources.
Updated: October 2026
8 sources checked
Guides to right angle drills
Guides on what to look for, how to use a product, and common mistakes.
Public UK sources and manufacturer pages, last checked on 21 October 2026. Shelf prices and star lines are the amazon.co.uk figures used on this page. The Milwaukee torque page is not a UK price.
This page contains affiliate links to amazon.co.uk. If you buy through them, we may earn a commission at no extra cost to you. Prices, stars and review counts are from the UK listings checked on 21 October 2026. We did not lab-test these right angle drills.