The best drill stands, compared.
Top pick: Wolfcraft 5028000 drill stand – Highest score in the set: a stated 43 mm Euronorm collar, a cast-iron base and a millimetre depth stop, at about £49.95 with 4.8 from 15, after the thin and non-UK review sample. Best value: TOPWAY multi-angle drill guide – Best shelf value among guides that do not need a 43 mm collar: own 1/2 inch chuck, about £16.99, 3.7 from 242, after wobble and a 90° lock that would not hold. Updated October 2026.
A drill stand holds a hand drill so the hole is straighter and the depth can repeat. In a UK workshop you buy one for a door, a sheet or a short bench run, when a pillar drill will not fit the space. The name covers a bench column, a portable guide that goes to the work, and a workstation only for a rotary multi-tool. A rotating clamp is a holder, not a column with a depth scale. You tell a suitable column by the neck it clamps, the stroke you can read as travel, and a base you can bolt down. A universal claim often means a 38 mm or 43 mm neck. Many cordless drills have no collar, so measure before you pay. A guide with its own chuck is the other fit. A repeated millimetre figure is stated travel, not a hole size in steel. Neck, stroke and the missing parts are covered in the [drill stand buying guide](/hub/drilling-and-accessories/drill-stand/sub/drill-stand-buying-guide).
A drill stand holds a hand drill so the hole is straighter and the depth can repeat. In a UK workshop you buy one for a door, a sheet or a short bench run, when a pillar drill will not fit the space.
38 products checked · 61 hrs invested · +21,400 readers
Swipe for more
1-2 of 11
Personal buying guide
Question 1 of 2
Where does the hole have to be?
The Wolfcraft 5028000, listed at £49.95, is the top pick in this set for a bench drill stand: the bullets state a 43 mm Euronorm collar, a 220 x 160 mm cast-iron base, a 55 mm stroke and a millimetre depth stop. The star line is 4.8 from 15 reviews, and none of those texts are from the United Kingdom. The dimension cell says 3.2 x 1.6 x 5.1 m, which fights the millimetre base. It is not a lab test.
Pros
Cons
Best for: You want a named bench stand with a stated 43 mm Euronorm collar and a depth stop.
Less suitable: You only have a cordless drill with no collar, or you need a large UK review sample.
Specifications
Common questions
Will a cordless drill fit the Wolfcraft stand?
The bullets say a 43 mm Euronorm clamping neck, held with a metal toggle. A cordless drill without that neck is not listed as compatible.
What stroke and reach are stated?
The title says 112 mm reach and 55 mm stroke. The bullets add a millimetre depth stop, a 25 mm column and a 220 x 160 mm cast-iron base.
Why ignore the size cell?
The size cell says 3.2 x 1.6 x 5.1 metres. That conflicts with the 220 x 160 mm base in the same listing.
The Dremel 220, model 26150220JB, listed at £44.99, is a rotary-tool workstation. It is 4.6 from 9,239 reviews. The chuck cell is 3.2 mm. UK reviews praise the metal base and complain about the diagram-only instructions. The metal-capacity cell says 1.97 inches, which conflicts with that chuck. It is not a hand-drill stand.
Pros
Cons
Best for: You already own a rotary multi-tool and want a bench holder.
Less suitable: You want to clamp a combi drill or a 43 mm neck.
Specifications
Common questions
Does the Dremel 220 fit a combi drill?
The compatible-devices cell says Dremel multi-tool. The chuck cell is 3.2 mm. It is not a 43 mm collar stand.
Is a rotary tool in the box?
The included line is the workstation. A rotary tool is not stated as included.
What do UK reviews say about setup?
Many of the first 50 UK reviews say the instructions are diagrams only. Some found the column out of square.
The Milescraft 1318 DrillMate, listed at £48.46, is a portable guide with its own 3/8 inch chuck for 3/8 inch and 1/2 inch cordless drills. It is 4.2 from 10,295 reviews, the largest count in the set. UK buyers cite door locks, dowels and tighter red grommets. The weight cell says 1.85 g and the torque cells say both 5 Nm and 15 Nm. It is not the bench-stand top pick.
Pros
Cons
Best for: You need a portable guide and want the largest review sample in the set.
Less suitable: You want a fixed 43 mm column stand, or you trust the 1.85 g weight cell.
Specifications
Common questions
Which drills does the DrillMate take?
The bullets say 3/8 inch and 1/2 inch cordless drills, plus a 3/8 inch chuck with a key.
What angles are marked?
45°, 60°, 75° and 90°, with centring channels for round stock up to 3 inches.
Is the listed weight usable?
The weight cell says 1.85 g and the size cell is 16.6 x 7.1 x 2 cm. Those cells conflict with a metal guide. Do not treat 1.85 g as the mass.
The 7E TRADING QR00647-1, listed at £49.85, is a column stand at 3.49 kg with stated inserts of 43, 40 and 27 mm and a 38–44 mm range. It is 4.2 from 22 reviews. UK texts say a Bosch drill fitted and that it is more compact than a large pillar drill. The drill is not included. The size cell of 30 x 10 x 10 cm looks too small for the weight.
Pros
Cons
Best for: You have a corded drill in the 38–44 mm range and want inserts.
Less suitable: You need a Euronorm claim from a known brand, or your neck is over 44 mm.
Specifications
Common questions
Which collar sizes are in the box?
The bullets say 38–44 mm and three inserts: 43 mm, 40 mm and 27 mm. The chuck cell says 42 mm.
Is the drill included?
The listing note says the hand drill is not included.
Did a Bosch fit?
One UK review says a Bosch power drill fitted and felt stable. Necks over 44 mm are excluded in the note.
The Greensen stand, listed at £33.90, claims 38–43 mm with a reducing bush, a 60 mm depth scale and a vice slot. It is 3.9 from 26 reviews and weighs 1.6 kg. UK reviews say the collar is small, a DeWalt did not fit, and it is not very precise. Bits and a vice are not included.
Pros
Cons
Best for: You have measured a 38 mm or 43 mm neck and want a scale ring.
Less suitable: You own a DeWalt or another drill the reviews say will not enter.
Specifications
Common questions
Does a DeWalt fit?
UK reviews say the collar is small and a DeWalt did not fit. The listing claims 38–43 mm with a bush. Measure first.
Is a vice included?
No. The bullets say bits, pliers and wood are not included. There is a slot for a vice.
What depth is stated?
60 mm, with an adjustable scale ring.
The divinge multi-angle guide, listed at £77.99, states 1.5–13 mm bits and 0° to 60°. It is 3.9 from 21 reviews, only two of them UK texts. Those UK texts mention a weakened 6 mm rod and the price. The listing says the chuck must not run anticlockwise. It costs more than the Milescraft in this set.
Pros
Cons
Best for: You want a 0–60° guide and have checked the anticlockwise limit.
Less suitable: You can use the Milescraft at £48.46 or you need to run the chuck backwards.
Specifications
Common questions
Can the chuck run in reverse?
The bullets say the chuck cannot be used anticlockwise.
What bit size is stated?
1.5–13 mm straight shank, also written as 1/16 inch to 1/2 inch.
How many UK reviews are on the listing?
The star line is 3.9 from 21. Two of the review texts are from the United Kingdom.
The TOPWAY 105414, listed at £16.99, is the best value in this set if you need a portable guide rather than a column stand. It includes a 1/2 inch chuck and states angles from 45° to 90°, with 3.7 from 242 reviews. Buyers mention wobble, slider holes that do not match, and a 90° lock that would not hold. It does not need a 43 mm collar.
Pros
Cons
Best for: You want an angled guide under £20 and can live with play.
Less suitable: You need a rigid 90° or a 43 mm bench stand.
Specifications
Common questions
Does the TOPWAY need a 43 mm collar?
No. The listing includes a 1/2 inch chuck and says it suits 3/8 inch and 1/2 inch power drills.
How far does it plunge?
The bullets say the stroke is up to 150 mm with the chuck bridge at full height. Reviews say it can be hard to plunge through the base.
Is it square?
The base has an angle readout from 45° to 90°. Reviews include wobble and a 90° lock that would not hold.
The SavingBird stand, listed at £20.85, claims a 38 mm or 43 mm collar and a 60 mm depth, at 1.44 kg. It is 3.6 from 284 reviews. UK texts include both 'fit for purpose' and wobble, a stated 5 mm of slack, a bent column, and battery drills including a DeWalt that would not fit. The vice is not in the box.
Pros
Cons
Best for: You have a drill that is already known to fit a small collar and you want a low price.
Less suitable: You need a cordless drill to fit, or you need a tight column.
Specifications
Common questions
Will my cordless drill fit?
UK reviews say battery drills, including a DeWalt, did not fit. The listing claims 38 mm or 43 mm. Measure the neck.
How heavy is it?
1.44 kg. Reviews call the column thin and the base light.
Is 60 mm a hole size?
The wood and metal cells both say 60 mm, the same figure as the stated depth. Treat it as travel, not a steel capacity.
The mvrople mp528bdps, listed at £15.86, is a 1.43 kg column stand. The chuck cell says 43 mm and the depth is stated as 60 mm. It is 3.5 from 13 reviews. One UK buyer measured the collar at 42.4 mm and returned it because a Bosch 43 mm drill would not fit. Another called it solid when the collar matched.
Pros
Cons
Best for: You have measured the collar and it matches your drill.
Less suitable: You own a Bosch 43 mm drill and cannot measure before buying.
Specifications
Common questions
Is the collar really 43 mm?
The cell says 43 mm. One UK buyer measured 42.4 mm and a Bosch 43 mm drill would not enter.
What is the stated depth?
60 mm in the bullets. The wood and metal cells say 2.4 inches, which is a different figure.
Is a vice included?
The bullets mention a slot for a vice on an iron base. A vice is not named in the included line.
The Flylin JY2024317-01, listed at £22.49, claims a 38 mm or 43 mm collar and weighs 1.44 kg. The star line is 2.7 from 3 reviews. Both UK texts call it flimsy. One says no drill fitted, including small ones. There is no praise in those two texts.
Pros
Cons
Best for: Only if you can return it easily and you have measured the collar.
Less suitable: You want any review evidence of a fit. Both UK texts say it is flimsy.
Specifications
Common questions
What do the reviews say?
Two UK reviews are on the listing. Both say flimsy. One says none of their drills fitted.
What fit is claimed?
38 mm or 43 mm collar, and a 43 mm chuck cell.
What is the weight?
1.44 kg. Dimensions are not on the listing.
The YUMILI holder, listed at £14.29, is a 415 g aluminium clamp with a stated 38–44 mm range, a 360° head and a 90° branch adjustment. The listing has no star line and no reviews. The bullets also say it stores bits and grinders. It is not a column stand with a depth scale.
Pros
Cons
Best for: You want a rotating holder and accept that nobody has reviewed it here.
Less suitable: You want a depth stop, a column, or any review evidence.
Specifications
Common questions
Is this a bench drill stand?
The title says hand drill press stand. The weight is 415 g and there is no stroke or depth stop. Treat it as a rotating clamp.
What size does it claim?
38–44 mm, and a table thickness of 7.3 cm.
Are there reviews?
The listing has no review texts and no star line.
Eleven drill stands on amazon.co.uk were scored on 19 October 2026 from listing facts and review notes, not from a lab test. Amazon evidence, listing fit and value are weighted 35, 40 and 25. A rotary workstation and a rotating clamp do not score as bench stands. Specification cells that contradict the bullets are not treated as capacity. Each star line stays the amazon.co.uk figure. The 0–100 score is not the stars times 20.
Amazon evidence
35%Stars are scaled out of 20, then a review-count band out of 15. Points come off for no star line, fewer than 10 ratings, no UK review text on the listing, or a collar or fit failure that buyers measured.
Listing fit
40%A stated collar or an own chuck that matches a real drill, a depth stop or stroke you can read as travel, a base you could bolt or clamp, and a product type that is actually a stand or a guide. A rotary workstation and a rotating clamp do not score as bench stands.
Value
25%What you can do on the day it arrives for the GBP shelf price. A missing vice, a missing drill, and a 90° lock that reviews say will not hold all lose points.
Start with the job, then the neck, then the stroke. A universal claim and a low price come after those three. The notes below follow that order for these eleven amazon.co.uk listings, checked on 19 October 2026. None of the scores is a drilling test.
A drill stand holds a drill so the hole is straighter and the depth repeats. UK shoppers meet three different tools under that name. A bench column stays on the bench and needs throat clearance. In this set, one listing states 112 mm reach. A portable guide goes to a door or a sheet. A rotary workstation is only for a multi-tool, not a combi drill. A rotating clamp, at a few hundred grams and with no stroke, is a holder. The mount is the decision that causes returns.
Column listings here claim 38 mm and/or 43 mm, sometimes with a bush. Many cordless drills have no collar. One UK buyer measured 42.4 mm against a stated 43 mm. Measure the neck, and use the Consumer Rights Act 2015 if the goods are not as described.
Budget column listings repeat 60 mm for wood and metal. That is the stated travel, not a hole diameter in steel. Wolfcraft states 55 mm stroke. TOPWAY states up to 150 mm. Cells in metres, grams or inches that fight the bullets are not capacity.
The TOPWAY is about £16.99 and reviews mention wobble and a 90° lock that would not hold. A vice slot is not a vice. The drill is not in the box unless the title says so. A cable-tied cordless trigger is a way to lose the stop.
Buy the type for the job. A column stays on the bench and needs a neck the clamp can take. Wolfcraft states 43 mm Euronorm and 112 mm reach. 7E TRADING states 38–44 mm with inserts of 43, 40 and 27 mm. Greensen, SavingBird, mvrople and Flylin claim 38 mm and/or 43 mm. UK reviews on the lighter columns include drills that would not enter, including a measured 42.4 mm collar. A guide goes to a door or a sheet and brings its own chuck.
Read the stroke as travel. Budget columns repeat 60 mm. Wolfcraft states 55 mm and a millimetre scale. TOPWAY states up to 150 mm. Milescraft states a depth stop and does not state a stroke you can quote. Ignore the Wolfcraft size cell in metres, the Milescraft weight cell of 1.85 g, and the Dremel metal cell of 1.97 inches. Light columns in this capture sit at 1.43–1.6 kg and draw wobble reviews. Wolfcraft states 3.1 kg and a cast-iron base of 220 x 160 mm. 7E TRADING states 3.49 kg.
Three typical situations, each with a recommendation from this comparison.
You have a cordless drill and the work will not fit under a pillar drill. The Milescraft 1318 DrillMate is a portable guide with its own 3/8 inch chuck, about £48.46, with 4.2 from 10,295 reviews. UK buyers cite door locks and dowels. It is not a bench column.
You have a corded drill with a 43 mm neck and you can bolt the base down. The Wolfcraft 5028000 states a 43 mm Euronorm collar, a cast-iron base and a 55 mm stroke, about £49.95, with 4.8 from 15 reviews. Those 15 reviews are not UK texts.
You want a portable guide that does not need a 43 mm collar, at the lower shelf price. The TOPWAY includes a 1/2 inch chuck and states a stroke up to 150 mm, about £16.99, with 3.7 from 242 reviews. Reviews mention wobble and a 90° lock that would not hold.
In this set of eleven amazon.co.uk listings, the top pick is the Wolfcraft 5028000 bench stand, about £49.95, with 4.8 from 15 reviews. The bullets state a 43 mm Euronorm collar, a cast-iron base, a 55 mm stroke and a millimetre depth stop. Those 15 reviews are not a UK sample. The best value among guides that do not need a 43 mm collar is the TOPWAY, about £16.99, with 3.7 from 242 reviews, its own 1/2 inch chuck and a stated stroke up to 150 mm. Reviews mention wobble and a 90° lock that would not hold. Neither score is a lab test.
Wolfcraft 5028000 drill stand
Highest score in the set: a stated 43 mm Euronorm collar, a cast-iron base and a millimetre depth stop, at about £49.95 with 4.8 from 15, after the thin and non-UK review sample.
TOPWAY multi-angle drill guide
Best shelf value among guides that do not need a 43 mm collar: own 1/2 inch chuck, about £16.99, 3.7 from 242, after wobble and a 90° lock that would not hold.
Editorial
Peter F. is the editor for DIY & tools at productscompared.co.uk. Comparisons in this category are checked against amazon.co.uk listings, review evidence and public UK sources.
Guides on what to look for, how to use a product, and common mistakes.
Public UK sources from the research digest, last checked on 19 October 2026. Shelf prices and star lines are the amazon.co.uk figures checked on 19 October 2026.
Expert source (DIY & tools): Charlie White (Charlie DIYte) (external profile) – public expert commentary used as a research source, not as a contributor to our pages.
This page contains affiliate links to amazon.co.uk. If you buy through them, we may earn a commission at no extra cost to you. Prices, stars and review counts are from the UK listings checked on 19 October 2026. We did not lab-test these drill stands.
