Existing 18 V XR packs
You already own 18 V XR batteries and a charger, and you want hammer stated on a bare body. The DCD776 is about £54.50, with 4.6 from 417 reviews. One review suspected a poorly reconditioned body, and brushless is not stated.
DeWalt cordless drill driver comparison 2026
The best DeWalt cordless drill drivers, compared.
Top pick: DeWalt DCD803KN-XJ, 4 heads Best value: DeWalt DCD776 body only – Lowest shelf price among listings that state hammer and have at least 200 reviews: about £54.50, 4.6 from 417, body only. Updated October 2026.
Charlie White (Charlie DIYte)Expert source
A cordless drill driver is a battery chuck tool for screws, flat-pack furniture, and holes in timber or thin metal. In the UK you pick one by the battery rail already on the shelf, by whether a pack and a charger are named in the box, and by whether hammer mode is written in the title or the bullets. An 18 V slide pack does not fit a 12 V tool, and a 12 V pack does not fit an 18 V body. A body-only box is a match only when that charger and those packs are already owned. Where a listing prints two torque figures, keep both. Brushless applies only when the listing or the model page says so. A masonry bit belongs with a hammer setting that the words actually state. Repeated holes in hard concrete, lintels, and dust you cannot control call for a different class of tool. How to read kit codes, empty boxes and cells that disagree is set out in the [cordless drill driver buying guide](/hub/drilling-and-accessories/de-walt-cordless-drill-driver/sub/de-walt-cordless-drill-driver-buying-guide).
A cordless drill driver is a battery chuck tool for screws, flat-pack furniture, and holes in timber or thin metal.
28 products checked · 62 hrs invested · +18,600 readers
8 of 8: Best DeWalt cordless drill drivers compared
Swipe for more
1-2 of 8Best overall
Best value
9.6/10
9.6/10
9.4/10
9.4/10
9.2/10
9.2/10
8.8/10
8.6/10
∼ £264
∼ £190
∼ £120
∼ £139
∼ £123
∼ £55
∼ £71
∼ £82
4.8(39)
4.8(15)
4.7(1,243)
4.7(28)
4.6(765)
4.6(417)
4.4(170)
4.3(203)
Personal buying guide
Which cordless drill driver fits?
Question 1 of 2
What batteries do you already own?
The best DeWalt cordless drill drivers in detail
Our view
The DCD803KN-XJ is the 18 V multi-head drill driver at £263.99, with 4.8 from 39 reviews, and the bullets name four heads, a brushless motor and 73 Nm. Reviewers single out the offset and right-angle heads for awkward spots, and they say the heads push on and pull off, which suits a cupboard you cannot reach with a straight drill. A long UK review says the kit has no battery and comes in a soft bag that lets the heads knock, and the included-components cell lists only a user manual. That review also says there is no hammer mode, while the table calls it a combination drill. The metal chuck wobbles and opens the hole slightly, and the clutch has to be turned past 14 on a dial that is hard to grip. The chuck cell prints 0.25 in, which does not match a metric metal-chuck bullet, though the listing does state a three-year manufacturer warranty. It is the tool for awkward angles when you already own an 18 V XR pack, not a masonry combi and not a battery-included kit.
Pros
- Four heads, including offset and right angle
- Brushless and 73 Nm are in the bullets
- Heads push on and pull off, according to reviews
- The listing states a three-year manufacturer warranty
Cons
- No battery in the included cell or in the UK review
- The soft bag lets the heads mark each other
- Chuck wobble and an awkward clutch ring
- A review says there is no hammer, despite a combination-drill cell
Best for: Awkward fixings when you already have an 18 V XR battery and want offset and right-angle heads.
Less suitable: Brick, a first kit with batteries, or a hard case from this listing.
Specifications
- Model
- DeWalt DCD803KN-XJ, 4 heads
- Brand
- DeWalt
- Price
- ∼£264
- Customer rating
- 4.8/5(39)
- Platform
- 18 V XR
- Kit
- 4 heads, no pack
- Hammer
- Conflicting
- Brushless
- Yes
- Torque
- 73 Nm
- Chuck
- 0.25 in
- Speeds
- 2
- Warranty
- 3 years
Common questions
Does the box include a battery?
The included-components cell says user manual. A UK review says the kit has no battery and comes in a soft bag. The bullets list four heads and an organiser.
Is hammer mode stated?
The drill-type cell says combination drill. A UK review says hammer mode is missing. The bullets do not describe a hammer setting.
What is the listed chuck?
The chuck cell says 0.25 inches. The bullets describe a metal chuck plus a quick-release bit holder, an offset head and a right-angle head.
Our view
The DCD799P2T-GB is listed at £189.97 as a brushless hammer drill driver with two 5 Ah packs, a TSTAK and a UK plug in the title, and the star line is 4.8 from 15 reviews. The included line names the drill, both packs and the kitbox, and the bullets also name a multi-voltage XR charger, with a state-of-charge indicator on the batteries. A review says the kit arrived sealed and that screws into wood were easy, with a clutch called precise for wall board. Torque cells disagree: maximum torque is printed as 26 Nm, while the torque cell and the bullets say up to 74 Nm, so you should not average them. One review reports the chuck out of order after a few uses, and 15 ratings is a thin file next to the DCD796’s 1,243. It is the two-pack 18 V option when you want a UK plug named on the title and you accept that the written evidence is short.
Pros
- Two 5 Ah packs, a TSTAK and a UK plug are in the title
- Brushless and hammer drill driver are stated
- A charger and a charge indicator are in the bullets
- A short review describes a sealed kit and easy screws in wood
Cons
- Only 15 reviews
- 74 Nm and 26 Nm are both printed
- One chuck fault after a few uses
- £189.97 is a high kit price for a thin review file
Best for: You want two 5 Ah XR packs and a named UK plug, and you can live with a small review sample.
Less suitable: You need a large review file, or one torque figure you can quote without a clash.
Specifications
- Model
- DeWalt DCD799P2T, 2 x 5 Ah
- Brand
- DeWalt
- Price
- ∼£190
- Customer rating
- 4.8/5(15)
- Platform
- 18 V XR
- Kit
- 2 x 5 Ah, TSTAK
- Hammer
- Yes
- Brushless
- Yes
- Torque
- 74 and 26 Nm
- Chuck
- 13 mm
- Speeds
- 2
Common questions
What comes in the kit?
The included line names the hammer drill driver, two 5 Ah batteries and a TSTAK kitbox. The bullets add a multi-voltage XR charger, a magnetic bit holder and a belt hook. The title says UK plug.
Which torque figure is on the listing?
The torque cell and the bullets say 74 Nm. The maximum-torque cell says 26 Nm. Both are printed.
How many reviews are there?
4.8 from 15 ratings. One review says the chuck failed after a few uses.
Our view
The DCD796P1-GB is the brushless 18 V combi at £119.98, with 4.7 from 1,243 reviews, and the included line names one 5.0 Ah pack. Torque cells say 70 Nm, the special-features cell says brushless, and reviewers use the hammer on brick, the LED in poor light, and the 5 Ah pack for several flat-pack builds on one charge. Reviewers also mention a case and a charger with the kit. The same amazon.co.uk table prints AC power, 1 mph, 1 W and 209 g, which you should ignore beside 18 V, 2,000 rpm and 70 Nm. More than one review reports play in the forward/reverse switch, and the battery can be wiggled in the shoe while still staying fitted. The listing warranty is one year, with reviewers saying a prompt registration can extend it. It is the top pick here because the review sample is the largest in the set and the kit names a pack, not because the table is free of junk units.
Pros
- 4.7 from 1,243 reviews, the largest sample in this set
- One 5.0 Ah pack named, with long runtime in reviews
- Brushless and hammer stated, with 70 Nm on the torque cells
- Case and charger mentioned by reviewers alongside the drill
Cons
- Forward/reverse switch has play on more than one drill
- The battery can be wiggled in the shoe while it stays fitted
- The table also prints 1 mph, 1 W, AC power and 209 g
- The longer warranty depends on registering in a short window
Best for: A first 18 V XR combi for house jobs when you want one named 5 Ah pack and a large review file.
Less suitable: You need two batteries in the box, or a loose selector would put you off the tool.
Specifications
- Model
- DeWalt DCD796P1, 1 x 5.0 Ah
- Brand
- DeWalt
- Price
- ∼£120
- Customer rating
- 4.7/5(1,243)
- Platform
- 18 V XR
- Kit
- 1 x 5.0 Ah
- Hammer
- Yes
- Brushless
- Yes
- Torque
- 70 Nm
- Chuck
- 13 mm
- Speeds
- 2
- Warranty
- 1 year
Common questions
How many batteries does the included line name?
One 5.0 Ah pack, on the DCD796P1 included-components line. Reviews also mention a case and a charger, which that cell does not list.
Is hammer mode stated?
Yes. The drill type is hammer drill, and the bullets say drill and hammer.
Which table figures look broken?
Power source says AC, maximum rotational speed says 1 mph, maximum power says 1 W, and weight says 209 g, beside 18 V, 2000 rpm and 70 Nm.
Our view
The DCD701D2 title says a 12 V drill driver with two batteries, a charger and a TSTAK box at £138.64, and the star line is 4.7 from 28 reviews. Reviewers call it compact and enough for smaller jobs, with an LED on the foot and torque settings that suit a painter removing catches and handles one-handed. Two 2 Ah batteries are praised, including texts that are not from the United Kingdom, so the UK sample is thinner than 28. The voltage cell says 18 V against the 12 V title, which means you should not fit this pack to an 18 V XR body or treat the table voltage as the rail. Hammer mode is not stated, and the title says drill driver rather than combi. There is no repeated defect cluster in the UK reviews in this file. It is the compact kit if the title’s 12 V rail is what you want, and a poor match for masonry or for a large review count.
Pros
- Title includes two batteries, a charger and a TSTAK box
- Compact enough for one-handed catch and handle work in a review
- Brushless is stated
- The LED on the foot is called effective
Cons
- The voltage cell says 18 V against a 12 V title
- Only 28 ratings, and some texts are not from the UK
- Hammer mode is not stated
- The packs are a different rail from the 18 V bodies
Best for: Small indoor jobs when you want a titled 12 V kit and you can ignore the 18 V table cell.
Less suitable: Brick, an existing 18 V XR pile, or a buyer who wants hundreds of UK reviews.
Specifications
- Model
- DeWalt DCD701D2 12 V kit
- Brand
- DeWalt
- Price
- ∼£139
- Customer rating
- 4.7/5(28)
- Platform
- 12 V vs 18 V
- Kit
- 2 packs, charger, TSTAK
- Hammer
- Not stated
- Brushless
- Yes
- Torque
- 57.5 Nm hard
- Chuck
- 13 vs 10 mm
- Speeds
- 2
Common questions
Is this 12 V or 18 V?
The title and the item-type name say 12 V, with two 2.0 Ah packs. The voltage cell says 18. Bullets say the 12 V packs fit existing 10.8 V products.
Is hammer mode stated?
No. The drill type is basic drill and the title says drill driver. Hammer is not in the bullets.
What is in the box?
The included line lists a battery charger, two batteries, and a TSTAK kitbox.
Our view
The GG107 kit is listed at £123.00 with 4.6 from 765 reviews, 42 Nm and a 13 mm keyless chuck, and the bullets state drill and hammer settings. Reviewers call it powerful for the size, light and well balanced, and they like two batteries in a case they describe as smart. The title says upgraded 1.5 Ah batteries while the bullets say two 2 Ah batteries, and the capacity cell says 1.5 Ah, so you cannot quote one pack size from this page. Speed cells print 2,000 rpm and 2,500 rpm, and the number of speeds is 4, while the included-components cell says only batteries even though the title and bullets also name a charger and a TSTAK box. One unit died just outside warranty, and one buyer missed a drill-bit set they had expected. Reviews also say there is no slot in the box for the drill itself. It is a complete-kit alternative to a bare body if you can accept the amp-hour clash, not a cleaner spec sheet.
Pros
- Two batteries and a case praised across 765 reviews
- Hammer and drill settings and a 13 mm keyless chuck are stated
- Reviewers call it light and well balanced
- 4.6 at £123.00 from a large sample
Cons
- 1.5 Ah and 2 Ah are both printed
- Speed cells disagree at 2,000 rpm, 2,500 rpm and four speeds
- No storage for the drill in the box, according to reviews
- One failure just outside the warranty period
Best for: A first kit when you want two packs and a case and you will check the live amp-hour line before you order.
Less suitable: You need one agreed battery capacity, or you already own XR packs and only want a body.
Specifications
- Model
- GG107 combi kit
- Brand
- DeWalt
- Price
- ∼£123
- Customer rating
- 4.6/5(765)
- Platform
- 18 V
- Kit
- 1.5 and 2 Ah
- Hammer
- Yes
- Brushless
- Not stated
- Torque
- 42 Nm
- Chuck
- 13 mm
- Speeds
- 4
Common questions
What batteries does the listing promise?
The title says upgraded 1.5 Ah batteries. The bullets say two 2 Ah batteries, a charger and a TSTAK box. The capacity cell says 1.5 Ah.
Does it have a hammer setting?
Yes. The bullets say drill driver and hammer settings, and the drill type is combination drill.
Is brushless stated?
No. Special features say portable. The model number is GG107, not a DCD code.
Our view
The DCD776 body only is listed at £54.50 on amazon.co.uk, with 4.6 from 417 reviews, and the highlight states hammer action, a 13 mm chuck, 15 torque positions, 42 Nm, two speeds and a 30 mm wood capacity. Reviewers who already own 18 V XR packs treat the bare tool as the reason for that price, because the box does not include a battery or a charger and other XR packs fit the shoe. A long review describes hammer mode through brick as usable without extreme noise. Brushless is not stated on this page, so you should not assume a brushless motor from the yellow housing. One reviewer found the chuck awkward with bits much under 2 mm, and another said bits slipped on mild steel and brick. A replacement felt heavier than the previous drill, one buyer suspected a poorly reconditioned body, and one review mentions a burning smell under heavy use after which the drill still ran. It is the best value pick in this set when you already have XR batteries, and a weak first kit if you still need cells and a charger.
Pros
- Body only at £54.50 when you already own 18 V XR batteries and a charger
- Hammer action, 15 torque positions and a 13 mm chuck are stated
- 4.6 from 417 reviews, a larger sample than the compact kit
- Reviewers say other XR packs fit the shoe
Cons
- Battery and charger are a separate cost
- Chuck complaints with bits under 2 mm and on steel and brick
- Brushless is not stated, and one review mentions a burning smell under heavy use
Best for: You already have 18 V XR batteries and want a stated hammer combi at the lowest price in this set.
Less suitable: You need batteries in the box, or you want a listing that says brushless.
Specifications
- Model
- DeWalt DCD776 body only
- Brand
- DeWalt
- Price
- ∼£55
- Customer rating
- 4.6/5(417)
- Platform
- 18 V XR
- Kit
- Body only
- Hammer
- Yes
- Brushless
- Not stated
- Torque
- 42 Nm
- Chuck
- 13 mm
- Speeds
- 2
Common questions
Does this listing include a battery?
No. The title says body only, and the included-components cell names a 13 mm chuck. Reviews describe buying it because the batteries were already owned.
Is hammer mode stated?
Yes. The title calls it a combi hammer drill, and the item highlight lists hammer action, an LED, and 15 torque positions.
Does the listing say brushless?
No. Special features say variable speed. Brushless is not in the fields.
Our view
The DCD709N-XJ is listed at £71.47 as product only, with 65 Nm, a 13 mm chuck and 4.4 from 170 reviews, and the included line says the battery and charger are not in the box. Buyers who expected a kit found neither, which is the complaint that comes up with this body. Reviewers describe a short body from chuck to back for cabinets, skirting and architrave, and they report a hammer setting on brick and block that is not enough for concrete. The drill-type cell says Impact Driver while the title says impact drill and the rank is Hammer Drills, so the page does not give you one clean tool type. Brushless is not in the feature cell. One order arrived in a plastic bag with bubble wrap and a damaged belt clip. It suits second-fix work if you already own 18 V XR packs and you read the type cells before you rely on the hammer.
Pros
- Short body that reviewers use for cabinets, skirting and architrave
- 65 Nm and a 13 mm chuck at £71.47 without a battery
- Hammer setting used on brick and block in reviews
- Price called fair for a DeWalt body
Cons
- No battery and no charger in the box
- Drill-type cell says Impact Driver
- Reviewers say the hammer is not enough for concrete
- One belt clip arrived damaged in a thin parcel
Best for: Tight second-fix work when you already have 18 V XR batteries and can live with a messy tool-type cell.
Less suitable: A first kit, concrete, or a buyer who needs brushless and hammer written in the same bullet.
Specifications
- Model
- DeWalt DCD709N-XJ, product only
- Brand
- DeWalt
- Price
- ∼£71
- Customer rating
- 4.4/5(170)
- Platform
- 18 V XR
- Kit
- Body only
- Hammer
- Conflicting
- Brushless
- Model page only
- Torque
- 65 Nm
- Chuck
- 13 mm
- Speeds
- 2
Common questions
Is a battery in the box?
No. The included line says one drill driver, and that the battery and charger are not included. Compatible devices are listed as DeWalt 18 V XR batteries and chargers.
Why does the table say impact driver?
The drill-type cell says Impact Driver and Is Electric says No. The title says cordless impact drill, the rank is Hammer Drills, and the included line says drill driver.
What torque is listed?
65 Nm, in both the maximum-torque cell and the torque cell. Maximum speed is 1650 rpm.
Our view
The DCD795N title says an 18 V brushless combi, body only, at £82.00, with 60 Nm, a 13 mm chuck and 4.3 from 203 reviews. Reviewers describe a shorter, lighter body than an older drill, an LED aimed at the chuck, and strong low-speed torque, including one person who mixed plaster on the trigger and another who used the hammer. A further review matched it to an existing DeWalt 18 V saw battery. The warranty cell says no warranty, and one buyer was refused registration because the tool was factory reconditioned. A trigger fault within two months, and a failure after 32 days that sent the buyer to DeWalt rather than a straightforward return, sit in the review file. The battery-capacity cell prints 5 Ah on a body-only listing whose included line is only the drill driver, and one review says the chuck has to be tightened firmly. Choose it when you want brushless in the title and you can confirm the unit is new before you trust a warranty line that says none.
Pros
- Title says brushless, body only, at 60 Nm
- Short body and an LED reviewers use in cupboards
- A review matched it to an existing 18 V DeWalt battery
- Low-speed torque and a fast brake are mentioned
Cons
- Warranty cell says no warranty
- A reconditioned unit would not register, in one review
- Trigger fault and a failure after 32 days appear in the file
- A 5 Ah cell is printed on a body-only page
Best for: An existing 18 V owner who wants brushless in the title and will confirm the unit is sold as new.
Less suitable: Anyone who needs a stated warranty, or a battery and charger in the box.
Specifications
- Model
- DeWalt DCD795N body only
- Brand
- DeWalt
- Price
- ∼£82
- Customer rating
- 4.3/5(203)
- Platform
- 18 V XR
- Kit
- Body only, 5 Ah clash
- Hammer
- Yes
- Brushless
- Yes in title
- Torque
- 60 Nm
- Chuck
- 13 mm
- Speeds
- 2
- Warranty
- No warranty
Common questions
Is this a bare tool?
The title says body only and the included components say drill driver. The battery-capacity cell still says 5 Ah.
What does the warranty line say?
The manufacturer warranty description says no warranty. One review says DeWalt registration rejected the tool as factory reconditioned.
Is hammer mode named?
The title says combi drill. A review says the hammer was used. Special features list only variable speed.
How we compared
Eight amazon.co.uk listings were scored from the star line, stars times 20, not from a torque test. The top pick is the highest of those scores among listings with at least 200 reviews, a battery named in the included line, and brushless stated. The best value is the lowest shelf price among listings that state hammer and have at least 200 reviews. A 4.8 from 15 ratings does not outrank 4.7 from 1,243.
1
Review evidence
25%The stored score is the amazon.co.uk star rating times 20. Awards also need at least 200 reviews. A higher star line from 15 or 39 ratings does not take the top pick.
2
Battery rail and kit
25%18 V XR slide packs and 12 V XR packs do not fit each other. A body-only price counts as a saving only when that charger and pack are already owned, and a named pack has to appear in the included line.
3
Hammer stated
20%Brick plugs need hammer written in the title or the bullets. A table cell that only says combination drill is not enough, and a manual that leaves masonry blank stays blank.
4
Torque and brushless as printed
15%Conflicting torque cells stay as two figures. Brushless counts only when the listing or the model page says so. A feature cell that is silent does not become brushless by housing colour.
5
Shelf price
15%Best value is the lowest amazon.co.uk shelf price among listings that state hammer and have at least 200 reviews. A cheaper kit with clashing amp-hour cells does not take that slot.
Independent review
Last updated: October 2026
8 sources checked
DeWalt cordless drill driver buying guide
Judge the rail you already own, whether a battery is named in the box, and whether hammer is written in words. Torque cells that disagree stay as two numbers. The notes below follow the amazon.co.uk listings in this set. None of the scores is a lab test.
What is a cordless drill driver?
A cordless drill driver here is a chuck tool on an 18 V XR slide rail or a 12 V XR rail. Those packs do not interchange. FlexVolt packs running at 18 V fit the 18 V combi bodies. 12 V XR packs fit the DCD701 and older 10.8 V XR tools. A body-only price is a saving only if that charger and pack are already on the shelf. Most kept amazon.co.uk listings are combis, with a hammer mode for brick. The DCD701 is a 12 V drill driver whose manual leaves masonry blank. The DCD803 is a four-head driver.
Best for
- An existing 18 V XR owner who wants a stated hammer body and already has packs
- A first kit for house jobs, including brick plugs, with one named 5.0 Ah pack
- Flat-pack and furniture with no brick, on the 12 V title rather than the 18 V cell
Not ideal for
- Hard concrete, lintels, or any listing that does not state hammer in words
- A first kit bought as a body-only price when you still need cells and a charger
- Anyone averaging the DCD799 torque cells, or fitting a 12 V pack to an 18 V body
Mistakes to avoid
- 1
Reading the DCD709 impact cell as a hex driver
The drill-type cell says Impact Driver. The title says impact drill, the rank is Hammer Drills, and the included line says drill driver. That cell does not make it a hex impact driver.
- 2
Treating two printed figures as one fact
GG107 prints 1.5 Ah and 2 Ah. The DCD799 prints 74 Nm and 26 Nm. The DCD701 table says 18 V and the title says 12 V. Keep both lines. Do not average them, and do not put a 12 V pack on an 18 V tool.
- 3
Assuming a table word means a battery or a hammer
The DCD803 table says combination drill, and a UK review says there is no hammer. The DCD795 prints 5 Ah on a body-only title. A cell is not the included line. Check what the box list actually names.
What to weigh up
Battery rail and what is in the box
HighThe first check is the rail, because the packs do not interchange. 18 V XR slide packs, including FlexVolt packs running at 18 V, fit the DCD combi bodies. 12 V XR packs fit the DCD701 and older 10.8 V XR tools. A body-only price is a saving only when that charger and pack are already on the shelf. N, or the words body only, means no battery. Then read the included line, not a stray capacity cell. The DCD796P1 line names one 5.0 Ah pack, at about £119.98.
Hammer, torque and brushless
HighBrick plugs need hammer stated in words. Toolstation’s guide treats a combi as weak on hard concrete and points that job to an SDS rotary hammer. The DCD776, DCD796, DCD795, DCD799 and GG107 state hammer. The DCD709 title says impact drill and the bullets do not, while reviews describe brick and block and say the hammer is not enough for concrete. The DCD701 manual leaves masonry blank. The DCD803 table says combination drill, and a UK review says there is no hammer.
Which option suits you?
Three typical situations, each with a recommendation from this comparison.
First kit, brick possible
You want a first 18 V combi with a pack in the included line and hammer stated. The DCD796P1-GB is about £119.98, with 4.7 from 1,243 reviews, one 5.0 Ah pack named, and 70 Nm on the torque cells.
Flat-pack, no brick
You want a compact kit for furniture and small indoor jobs, and you do not need hammer. The DCD701D2 title says 12 V, two batteries, a charger and a TSTAK box, at about £138.64. The voltage cell says 18 V. Follow the title and the manual.
Common questions about DeWalt cordless drill drivers
Which DeWalt cordless drill driver is the top pick in this set?
The top pick is the DeWalt DCD796P1-GB, about £119.98 on amazon.co.uk, with 4.7 from 1,243 reviews. The included line names one 5.0 Ah pack. Brushless and hammer are stated, and the torque cells say 70 Nm. A 4.8 from 15 or 39 reviews does not take the award: the rule needs at least 200 reviews, a named battery and brushless. Ignore cells that print 1 mph, 1 W and 209 g. This score is the star line, not a lab test.
How much does a DeWalt cordless drill driver cost on amazon.co.uk?
Bare 18 V bodies in this set run from about £54.50 to about £82.00. The one-pack kit is about £119.98. The seller kit stays at the captured £123.00 after a live check showed £117 on 19 October 2026. The 12 V kit is about £138.64, the two 5 Ah kit about £189.97, and the four-head driver about £263.99. A body-only price is a saving only when you already own the packs and charger.
What should you check before you buy a cordless drill driver?
Start with the battery rail. 18 V XR slide packs, including FlexVolt packs running at 18 V, do not fit 12 V XR packs. Body only, or an N kit code, means no battery. Look for hammer in the title or the bullets. A table cell that only says combination drill is a weak signal. Keep two torque figures as two figures. Count brushless only when the listing or the model page says so. A large review count outweighs a higher star line from a handful of ratings.
Should you choose 12 V or 18 V?
The DCD701D2 title says 12 V, with two batteries, a charger and a TSTAK box, at about £138.64. Its voltage cell says 18 V. Follow the title and the manual: those packs also fit older 10.8 V XR tools, and they do not fit the 18 V bodies. Hammer is not stated. Choose 18 V when you already own XR slide packs or you want a stated hammer combi. The split is set out in 12 V or 18 V cordless drill drivers.
Can a hammer setting drill concrete?
A stated hammer mode is for brick plugs with a masonry bit. Toolstation’s guide treats a combi as weak on hard concrete and points that work to an SDS rotary hammer. The DCD701 manual leaves masonry blank. A UK review of the DCD803 says there is no hammer. DCD709 reviews say the hammer is not enough for concrete. Repeated holes in hard concrete belong in the rotary hammer comparison.
What does body only mean on these listings?
Body only, or an N kit code, means the battery and charger are not in the box. The DCD776 at about £54.50 and the DCD709N-XJ at about £71.47 are bare bodies. The DCD795N title also says body only while a 5 Ah cell is printed. That bare price is the best value here only when you already own 18 V XR packs. The DCD796P1 names one 5.0 Ah pack if you still need a cell.
Why do some torque cells disagree?
The DCD799 prints 74 Nm in the bullets and 26 Nm in the maximum-torque cell. Keep both. Do not average them. The DCD701 manual splits 57.5 Nm hard and 25.5 Nm soft, which is the clutch, not the same clash. The DCD796 torque cells say 70 Nm beside junk units of 1 mph and 1 W. GG107 prints 2,000 rpm, 2,500 rpm and four speeds. Quote the cell you are reading, and say when a second cell disagrees.
When should you call a professional?
Call a professional for repeated concrete or lintel holes, for drilling where cables or pipes cannot be traced, and for silica dust you cannot control. At work, an employer still has to look at PUWER and the Control of Vibration at Work Regulations 2005. A householder is not an employer. The only vibration figure here is the DCD701 manual: 2.5 m/s² for metal drilling, K 1.5. Do not copy it onto other models. These listings do not show a UKCA mark.
Our verdict
In this set of eight amazon.co.uk listings, the top pick is the DeWalt DCD796P1-GB. It is about £119.98, with 4.7 from 1,243 reviews, brushless and hammer stated, and one 5.0 Ah pack named. The torque cells say 70 Nm. The same table also prints 1 mph, 1 W and 209 g, which you should ignore. The best value is the DeWalt DCD776 body only at about £54.50, with 4.6 from 417 reviews and hammer stated. Brushless is not stated, and the box has no battery. None of these scores is a lab test.
Best value
View offer
DeWalt DCD776 body only
Lowest shelf price among listings that state hammer and have at least 200 reviews: about £54.50, 4.6 from 417, body only.
Editorial
Editor
Cordless drill driversBattery platformsamazon.co.uk listings
Peter F. is the editor for DIY & tools at productscompared.co.uk. Comparisons in this category are checked against amazon.co.uk listings, review evidence and public UK sources.
Updated: October 2026
8 sources checked
Guides to DeWalt cordless drill drivers
Guides on what to look for, how to use a product, and common mistakes.
Cordless drill driver buying guideRail, kit code, hammer, and which table cells to leave unreadBest DeWalt cordless drill driverWhich kept listing fits an existing 18 V pile, a first kit, or tight accessHow to use a cordless drill driverCollar, speed, clutch, bit, and the empty-battery surprise12V or 18V drill driverThe DCD701 against the 18 V XR bodiesCordless drill driver for masonryWhen a stated hammer mode is enough, and which listings do not state it
Related comparisons
Sources
Public UK sources from the research digest, last checked on 19 October 2026. Shelf prices and star lines are the amazon.co.uk figures in the display file.
- Toolstation drill buying guide (retrieved 19 October 2026)
- DeWalt UK, DCD709N-XJ (retrieved 19 October 2026)
- DeWalt UK, DCD799P2T-GB (retrieved 19 October 2026)
- DeWalt UK, DCD701D2-GB (retrieved 19 October 2026)
- DeWalt DCD701 manual (retrieved 19 October 2026)
- GOV.UK, Supply of Machinery (Safety) Regulations 2008 (retrieved 19 October 2026)
- HSE, vibration regulations (retrieved 19 October 2026)
- Top 7 Tools battery platforms (retrieved 19 October 2026)
Expert source (DIY & tools): Charlie White (Charlie DIYte) (external profile) – public expert commentary used as a research source, not as a contributor to our pages.
This page contains affiliate links to amazon.co.uk. If you buy through them, we may earn a commission at no extra cost to you. Prices, stars and review counts are the amazon.co.uk figures in this comparison, captured with a live seller-kit check on 19 October 2026. We did not lab-test these cordless drill drivers.