Independent comparisons. We may earn from shop links. More info

Drill stand buying guide

Updated: 2026-10-23

You have a corded drill in a UK shed, or a cordless combi in a flat, and the next hole is supposed to be square. This drill stand buying guide starts with the tool you already own, because one search returns a bench column, a portable guide and a rotary workstation. The [drill stand comparison](/hub/drilling-and-accessories/drill-stand) lists the amazon.co.uk rows from a 19 October 2026 capture, at shelf prices from £14.29 to £77.99. This page does not crown a model. Products Compared used those listings and public UK guides, not a lab. A qualifying purchase can earn a commission at no extra cost to you.

You have a corded drill in a UK shed, or a cordless combi in a flat, and the next hole is supposed to be square.

Our top picks

Wolfcraft Wolfcraft 5028000 drill stand

Best overall

Wolfcraft Wolfcraft 5028000 drill stand
9.6/10about £49.95
View offer
Dremel Dremel 220 workstation

Alternative

Dremel Dremel 220 workstation
9.2/10about £44.99
View offer
TOPWAY TOPWAY multi-angle drill guide

Best value

TOPWAY TOPWAY multi-angle drill guide
7.4/10about £16.99
View offer
On this page
  1. 1.Three tools share the search
  2. 2.The drill you own decides the mount
  3. 3.Weight and a 60 mm line
  4. 4.What the box leaves out

Three tools share the search

A column stand stays on the bench. You take the side handle off a corded drill, clamp the neck, and pull the drill down the column. In this capture that group runs from the mvrople at £15.86 to the Wolfcraft 5028000 at £49.95. The Wolfcraft bullets state a 112 mm reach, so a wide board can still foul the column. A portable guide goes to the work. The TOPWAY at £16.99, the Milescraft DrillMate at £48.46 and the divinge at £77.99 bring their own chuck. The third result is easy to misread. The Dremel 220, at £44.99 with 4.6 from 9,239 reviews, is a workstation for a rotary multi-tool. The chuck cell is 3.2 mm, so it is not a stand for a combi drill. The YUMILI at £14.29 weighs 415 g and has no depth stop. Treat it as a rotating clamp.

The drill you own decides the mount

Tooled-Up's notes describe the usual UK pattern: most column stands take a corded drill with a 43 mm collar after the side handle comes off, and many cordless drills will not fit because they have no collar. If a caliper shows no 43 mm band, a guide with its own chuck is the type that matches. The measurement is on the 43 mm drill collar page. The TOPWAY and the Milescraft bring their own chuck. The divinge listing says the chuck must not run anticlockwise. Column stands here claim 38 mm, 43 mm, or both, sometimes with a bush. The Wolfcraft bullets state a 43 mm Euronorm collar only. The Greensen claims 38–43 mm with a reducing bush. The 7E TRADING states inserts of 43, 40 and 27 mm and a 38–44 mm range. A printed 43 mm is a claim. One UK buyer of the mvrople, whose cell says 43 mm, measured 42.4 mm and returned it because a Bosch 43 mm drill would not enter.
Wolfcraft Wolfcraft 5028000 drill stand

Testsieger

Wolfcraft Wolfcraft 5028000 drill stand
9.6/10about £49.95
View offer

Weight and a 60 mm line

Light column stands in this capture cluster at about 1.43–1.6 kg. The SavingBird is 1.44 kg, with 3.6 from 284 reviews. UK texts mention wobble, a stated 5 mm of slack, a bent column, and battery drills, including a DeWalt, that would not fit. The Flylin, also 1.44 kg, is 2.7 from 3 reviews, and both UK texts call it flimsy. The Wolfcraft lists 3.1 kg and a cast-iron base. The 7E TRADING lists 3.49 kg. Read 60 mm as travel, not as a hole in steel. The mvrople, SavingBird and Greensen repeat 60 mm as the stated depth. The mvrople wood and metal cells also say 2.4 inches, so neither number is a measured steel capacity. The Wolfcraft bullets state a 55 mm stroke and a millimetre depth stop. The TOPWAY states a stroke of up to 150 mm. Set the stop on scrap.

What the box leaves out

The drill is not included unless the title says so. A vice slot is not a vice. The mvrople, SavingBird, Greensen and 7E TRADING mention a slot, and the included lines do not name a vice. Greensen reviews say bits and a vice are not included. The Wolfcraft UK shop page for article 3406000 notes that screws are not included on that article. Do not paste that note onto amazon model 5028000. Ignore cells that fight the bullets. The Wolfcraft dimension cell says 3.2 x 1.6 x 5.1 m. The Milescraft weight cell says 1.85 g. The Dremel metal-capacity cell says 1.97 inches, against a 3.2 mm chuck. Those cells are not capacities.

Common questions

Do I need a column stand or a guide?
A column stand when the work fits a bench and the drill has a collar. A portable guide when the work is a door or a sheet, or the drill has no 43 mm neck. A rotary workstation is a third product, for a multi-tool. Choose the type before you compare stars.
Will my cordless drill fit?
Many cordless combi drills have no 43 mm collar, so they will not enter a column stand built for that neck. Tooled-Up states that as the usual case. Forum exceptions are user reports, not a chart. If you cannot measure a 43 mm band, look at the TOPWAY or the Milescraft and still check the chuck.
Is 60 mm the size of hole I can drill in steel?
No. On the budget column listings, 60 mm is stated travel, not a hole diameter in steel. The mvrople also prints 2.4 inches in the wood and metal cells. The hole depends on the bit, the drill and how square the stand stays. None of that was measured in a lab for this page.
Is a vice in the box?
A vice slot is not a vice. Several column stands mention a slot, and the included line does not name a vice. Greensen reviews say a vice is not included. Clamp the work, or buy a vice, before the first hole. A Clarke CDS3 with a vice, about £26–£29 including VAT, is not in our table.
Is the Dremel 220 a stand for a combi drill?
It is a rotary-tool workstation at £44.99, with 4.6 from 9,239 reviews and a chuck cell of 3.2 mm. That count does not make it a stand for a 43 mm combi drill. For a hand drill, look at a column stand or a guide.

Related pages

Best drill stand

Drill stand vs pillar drill

Drill stand

43 mm drill collar: measure the neck before you buy

How to use a drill stand: mount, clamp and depth stop

Sources

Public UK sources from the research digest, last checked on 19 October 2026. Shelf prices and star lines are the amazon.co.uk figures checked on 19 October 2026.

  1. HSE: PUWER (retrieved 19 October 2026)
  2. HSE INDG291: using work equipment safely (retrieved 19 October 2026)
  3. HSE CN3: construction silica (retrieved 19 October 2026)
  4. HSE WD0: wood dust (retrieved 19 October 2026)
  5. HSE: using the right type of PPE (retrieved 19 October 2026)
  6. Consumer Rights Act 2015 (retrieved 19 October 2026)
  7. UK Workshop: drill stand advice (retrieved 19 October 2026)
  8. Tooled-Up: drill stands (retrieved 19 October 2026)