The best white masonry paints, compared.
Top pick: Dulux Weathershield Jasmine White 5 litre Best value: Leyland Granocryl brilliant white 5 litre – About £4.19 per litre at £20.95, with 4.6 from 1,395 reviews, the strongest price and pack balance among tins with a large review count. Updated October 2026.
White masonry paint on amazon.co.uk is a water-borne acrylic coating for exterior mineral walls: suitable brick, cement render, concrete, roughcast and pebbledash. You are usually refreshing a tired elevation, a garden wall or a patch. Most of these tins are a smooth brilliant white or pure brilliant white, rather than a textured finish. If the wall is dashed, buy litres at the rough-surface rate. How to choose substrate, film and shade is in the [white masonry paint buying guide](/hub/paints-and-varnishes/white-masonry-paint/sub/white-masonry-paint-buying-guide). Use it on sound, dry cement render, pebbledash, concrete, and brick that is normally painted. Do not specify these tins for common, or engineering brick, for lime render, or for walls below the damp-proof course where moisture cannot escape. Dulux’s consumer page says the smooth masonry paint is not for brick. The say it is not for lime render, and they describe a breathable film.
White masonry paint on amazon.co.uk is a water-borne acrylic coating for exterior mineral walls: suitable brick, cement render, concrete, roughcast and pebbledash.
40 products checked · 67 hrs invested · +16,800 readers
Swipe for more
1-2 of 11
Personal buying guide
Question 1 of 2
How big is the wall?
This 5 litre Dulux tin gives exterior walls an off-white Jasmine White finish rather than a stark brilliant white. The listing states 15 m² per litre, a four-hour drying time and a 15-year protection claim, all of which depend on the wall and application conditions. Its 4.7-star rating from 698 reviews is high, though the evidence base is smaller than for the leading Leyland and Sandtex listings. The water-based acrylic format also makes water clean-up practical after painting. A UK reviewer reported a burst tin, so delivery condition needs checking before the job begins. Another could not match the shade using a different brand, making it sensible to buy enough of the same product for the whole elevation.
Pros
Cons
Best for: Rendered exterior walls where you want a softer off-white and can complete the area with the same product.
Less suitable: Brilliant-white schemes, small colour-matching repairs or buyers relying on the year claim without checking its conditions.
Specifications
Common questions
Is Jasmine White the same as brilliant white?
No. The colour is Jasmine White and the colour code is F2EFE5. One UK reviewer could not match it with another brand.
Do brushes clean in water?
The bullets say water based. One UK review says brushes wash out in water.
What life does the listing claim?
The bullets say 15 years, plus a mould and algae protected film and rainproof.
This 2.5 litre Sandtex tin is a convenient size for a smaller exterior area where you want an ultra-smooth brilliant white finish. It carries a 4.7-star rating from 689 reviews and a listed 15-year protection claim. The compact pack costs £6.38 per litre, more than the value-focused 5 litre options but without leaving as much surplus on a small job. A UK reviewer specifically advises stirring the paint well before use. The listing labels the paint type as watercolour, which is evidently inconsistent with the masonry product title, and its 430.556-square-foot coverage figure does not say whether it applies per tin or per litre. Those data problems make the spreading rate and binder less dependable than the rating alone suggests.
Pros
Cons
Best for: Small smooth-render or masonry projects where a 2.5 litre brilliant white tin limits leftover paint.
Less suitable: Projects that require a reliable coverage calculation or clear technical listing data.
Specifications
Common questions
Is this a watercolour paint?
The paint-type attribute says watercolour. The title is ultra smooth masonry paint. Treat the attribute as a listing error, not a binder.
Does the listing say it is weatherproof?
A bullet says waterproof, with wax protection. The page also asks the question and does not answer it.
Do you need to stir it?
One UK review says to stir the tin well before use.
This 5 litre Sandtex tin is listed for render, roughcast, pebbledash, concrete, blocks and facing bricks, making it one of the more clearly targeted masonry options here. Its stated 12–16 m²-per-litre coverage is useful for smooth surfaces, but textured walls will sit towards the lower end or below it. A 4.6-star rating from 2,867 reviews gives it the largest review record in the comparison. At £4.78 per litre, it remains in the entry price band without relying on the very low-evidence DRW listing. The finish attribute says gloss even though the title describes smooth masonry paint, so that field should not be read as proof of a trim-like sheen. One UK reviewer reported some colour fade after three years on a sunny breeze-block wall, which tempers expectations for long-term colour retention.
Pros
Cons
Best for: Householders covering render, roughcast, pebbledash or concrete with a well-reviewed pure brilliant white paint.
Less suitable: Buyers who need a verified sheen classification or assured long-term colour retention on a sunny wall.
Specifications
Common questions
Can you use it on pebbledash?
The bullets name pebbledash, roughcast, render, concrete, blocks and facing bricks.
Is the finish gloss?
The finish-type attribute says gloss. The product title says smooth masonry paint. Those two lines disagree.
What do UK reviews say about lasting colour?
One reviewer said a sunny breeze-block wall was still sound after three years and that the colour had faded a bit.
This 2.5 litre tin gives you a practical quantity for a garden wall, repair or other smaller exterior job without committing to a full 5 litre pack. The listing puts coverage at about 10 m² per litre, although a porous or heavily textured wall will use more. Its 4.6-star rating from 2,120 reviews is one of the stronger evidence bases in this comparison. The stated surface list is unusually broad, covering brick, concrete, render, roughcast and pebbledash as well as walls. There is a listing inconsistency because the product is branded Leyland while the manufacturer field says Johnstones. A UK review also reports cracking beside Weathershield, so the ten-year line should be treated as conditional on preparation, substrate and exposure rather than as a guaranteed outcome.
Pros
Cons
Best for: Smaller exterior walls, patches and pebbledash or render where a 2.5 litre smooth white tin is sufficient.
Less suitable: Large elevations or buyers who need an unambiguous manufacturer record and firm long-term performance evidence.
Specifications
Common questions
Can you use this on pebbledash?
The bullets name pebbledash, roughcast and render. The listing also asks whether it needs a primer and does not answer that.
How long does the listing say it takes to dry?
The attribute table lists a 4 hour full cure and a 24 hour dry time. Those two figures are both on the page.
Is the waterproof claim on the tin?
The listing asks if it is waterproof and does not answer. One UK review calls the paint waterproof.
This 5 litre Leyland tin covers a typical medium-sized masonry project at a listed 10–12 m² per litre, with rough surfaces likely to reduce that figure. At £4.19 per litre, it offers the strongest balance of price, pack size and established review record in this set. The 4.6-star rating from 1,395 reviews gives it substantially more buyer evidence than the cheapest-per-litre DRW listing. Its acrylic smooth finish and brilliant white shade suit general exterior masonry rather than a deliberately textured result. The listing conflicts on drying, giving touch dry in 1–2 hours alongside other figures of two and five hours. UK reviews also mention slower summer drying and weaker opacity than dearer paint, so allow for preparation, weather and a possible second coat.
Pros
Cons
Best for: Budget-conscious buyers painting a medium-sized rendered or masonry wall in brilliant white.
Less suitable: Jobs that depend on a precise drying schedule or where maximum opacity in the first coat is the priority.
Specifications
Common questions
Can you use it on pebbledash?
The listing asks and does not answer. UK reviews describe pebbledash and roughcast.
How fast does it dry?
Bullets say touch dry in 1–2 hours. The attribute table also lists 5 hours dry time and 2 hours full cure. One UK reviewer said summer drying was slower than the tin.
Does the listing say it is waterproof?
Waterproof is marked true, and the water resistance level says water resistant.
This 7.5 litre Dulux tin is sized for a larger wall or elevation and lists coverage of up to 15.2 m² per litre on suitable surfaces. Its £4.34-per-litre cost is competitive for a large branded pack, while 4.6 stars from 1,114 reviews provide a solid buyer record. The acrylic smooth masonry formulation is a straightforward option when you want white rather than brilliant white or Jasmine White. The listing marks it waterproof, but that does not establish a damp-proofing function or an EN 1062 performance class. One UK reviewer found the body gel-like and better suited to pebbledash than a flat wall. Coverage on roughcast or pebbledash will also be lower than the headline maximum, so calculate quantity using the rough-surface rate.
Pros
Cons
Best for: Larger exterior masonry areas, particularly where a substantial smooth white pack and established review record matter.
Less suitable: Small touch-up jobs or buyers expecting the maximum coverage figure on rough pebbledash.
Specifications
Common questions
What surfaces does the listing name?
The attribute says walls. One UK review used it on pebbledash because the paint was gel-like.
Is it waterproof on the attribute table?
Waterproof is marked true and the water resistance level says waterproof.
How much ground does 7.5 litres cover on the listing?
The coverage line says up to 15.2 m² per litre. The listing does not convert that for pebbledash.
This 5 litre Dulux tin lists up to 75 m² of coverage and gives exterior walls a pure brilliant white, smooth masonry finish. Its water-based acrylic formulation supports water clean-up, and the listing cites UV resistance and a flexible film rather than a specific service life. The 4.6-star rating from 775 reviews is credible, though the £6.47-per-litre price is above several comparable 5 litre tins. The finish attribute says satin while the title says smooth, so the exact sheen is not consistently described. Several UK reviews report loose lids and paint leaking in the box, making an immediate delivery check important. A rough wall will also reduce the headline coverage, and cold or unsuitable weather can delay the work.
Pros
Cons
Best for: Buyers who prefer a Dulux pure brilliant white for a medium-sized exterior wall and can inspect the tin on arrival.
Less suitable: Time-critical jobs where transit damage would be disruptive or budgets focused on the lowest cost per litre.
Specifications
Common questions
Does the listing state a 15 year life?
This page says long lasting protection, a flexible film and UV resistance. It does not print a year count.
What coverage is printed?
Up to 75 m² for the 5 litre tin. One UK review says that figure is only a guide on a rough wall.
What went wrong in UK reviews?
Several reviews describe a loose lid and leaked paint in the box. One buyer also waited because of frost.
This 5 litre Sandtex listing offers a matte, pure brilliant white masonry paint with stated coverage of 10–12 m² per litre. At £5.19 per litre, its shelf price sits in the middle of the comparison. The listing marks it waterproof and suitable for brick, but that label should not be treated as evidence that it can solve damp or work on every brick type. Its 4.5-star rating comes from only 30 reviews, so the buyer evidence is much thinner than for the similarly priced high-volume listings. The product page also supplies only one feature bullet, odour blocking, and a 24-hour full-cure attribute. The limited detail and short review sample make it harder to judge consistency, coverage and suitability before purchase.
Pros
Cons
Best for: Straightforward masonry repainting where the listed matte finish and 5 litre quantity match the job.
Less suitable: Buyers who want a large review base, detailed substrate guidance or extensive technical evidence.
Specifications
Common questions
What is the only feature bullet?
Odour blocking. Coverage, 10–12 m² per litre, is on the attribute table.
How many reviews are on the listing?
4.5 from 30. Only a short set of United Kingdom review texts is on the listing.
Does the listing say waterproof?
Waterproof is marked true and the water resistance level says waterproof.
This 2.5 litre Polar WallGuard tin is listed for brick, concrete, stone, pebbledash and prepared ironwork, giving it a broader use case than a wall-only entry. The water-based, solvent-free listing states touch dry in 1–2 hours and a 4–6-hour recoat window. At £14.80 per litre, however, it is by far the most expensive paint in this comparison. Its 4.3-star rating from 477 reviews also trails the better-established mainstream options. The coverage information is unreliable because a 2.5 litre product page repeatedly describes what 5 litres will cover and gives two different figures. Many sampled reviews concern anthracite or black variants, so the review record is less specific to this white tin than the headline count suggests.
Pros
Cons
Best for: A small project where the stated compatibility with masonry and prepared ironwork matters more than cost.
Less suitable: Value-led buyers, large walls or anyone needing dependable white-specific coverage evidence.
Specifications
Common questions
How much paint is in the tin?
The title, volume and weight say 2.5 litres and 2.5 kg. A bullet and another attribute describe 5 litre coverage.
Can you use it on pebbledash?
The bullets name pebbledash, brick, stone, cement and prepared ironwork. The listing question itself is unanswered.
Are the reviews all about this white tin?
Many of the first 50 UK reviews discuss anthracite or black. White-only comments are a smaller part of that sample.
This 5 litre Sandtex tin is the only fine-textured white masonry paint in the comparison, intended to leave a heavier surface rather than preserve a smooth finish. Its 7.41 kg weight reflects the substantial pack, while the listed 24-hour drying time calls for a suitable weather window. Short UK reviews describe the paint as thick and usable by brush or roller, including on a park home. The 4.2-star rating comes from only 33 reviews, so those positive comments form a limited evidence base. The coverage field merely repeats five litres and therefore gives no usable spreading rate for planning two coats. The listing's tiny product image is not evidence of paint quality, finish or packaging condition.
Pros
Cons
Best for: Walls where you deliberately want a fine-textured brilliant white finish to soften minor surface irregularities.
Less suitable: Smooth-finish projects or jobs requiring a reliable quantity calculation before purchase.
Specifications
Common questions
Is this smooth masonry paint?
No. The title says fine textured. It is the only textured white tin in this set.
What coverage does the listing give?
The coverage attribute says 5 litres. That is the pack size, not a spreading rate.
What do the short UK reviews say?
They call it thick and usable by brush or roller, including on a park home. The sample is 33 ratings.
This 7.5 litre listing has the lowest calculated price per litre in the set, but its evidence and product identity are too weak to make that figure a confident bargain. The title and model name say Sandtex, while the brand, manufacturer and country fields say DRW and China. It has only three ratings at 3.5 stars, with just two short positive UK review texts in the available sample. The listing provides no usable coverage or drying figure, so you cannot calculate the quantity or schedule from the page. It names render and concrete while explicitly excluding common, Fletton and engineering brick. A feature line also refers to wood, metal and PVC, adding another inconsistency to what is presented as masonry paint.
Pros
Cons
Best for: Only buyers who can independently verify the supplied product and need paint for a listed render or concrete surface.
Less suitable: Anyone seeking a well-established brand record, dependable technical data or paint for common, Fletton or engineering brick.
Specifications
Common questions
Is the brand Sandtex or DRW?
The title and model name say Sandtex. The brand, manufacturer and country fields say DRW and China.
Which bricks does the listing exclude?
Common, Fletton and engineering bricks.
How many written reviews are on the listing?
The listing says 3.5 from 3 ratings. Two United Kingdom review texts are on the listing, and both are short praise.
We compared eleven amazon.co.uk listings of white masonry paint. Shelf prices, stars and review counts are the UK lines from 15 October 2026. Each score is the editorial figure on the product card: it starts from the star rating and is reduced for the listing clash or thin review sample named on that card. The top pick is Leyland Granocryl white in 2.5 litres. The best value is Leyland Granocryl brilliant white in 5 litres. The weights below are the share of attention for each check. They are not a second total, and this was not a laboratory test.
Review evidence
30%Stars and the review count on the amazon.co.uk listing. A tin with three ratings is not treated as equal to a tin with more than a thousand.
Coverage you can use
20%A spreading rate in square metres per litre. A field that only repeats the pack size, or that describes 5 litres on a 2.5 litre tin, scores down.
Listing agreement
20%Brand, finish and pack size should agree. A gloss or satin attribute on a smooth masonry title, or a Sandtex title with a DRW brand field, is a cut.
Substrate named
15%Sound render, pebbledash, concrete and brick that is normally painted. Common, Fletton and engineering brick, and lime render, stay off the shortlist.
Price per litre
15%Shelf price divided by litres, in GBP. The lowest figure is not the best value when the review count is three.
Choose the wall first, then the film, then the white, then the litres. A smooth tin coats existing pebbledash. A textured tin is a different film, with a lower coverage rate. A year claim is conditional.
White masonry paint in this set is a water-borne acrylic for exterior mineral walls. Use it on sound, dry cement render, pebbledash, concrete, and brick that is normally painted. Do not specify these tins for common, Fletton or engineering brick, for lime render, or for walls below the damp-proof course where moisture cannot escape. Dulux’s consumer page says the smooth masonry paint is not for Fletton brick. The Dulux FAQs say it is not for lime render, and they describe a breathable film.
Smooth render is often about 10–16 m² per litre. Pebbledash is about 4–6 m² per litre. Buy for the worse figure and for two coats, or you will run out on the second coat.
Smooth paint coats existing pebbledash and leaves the dash as it is. Fine textured is a heavier film for small irregularities, and it covers fewer square metres per litre. The only textured tin here has 33 reviews and no usable coverage rate.
A 10-year or 15-year line is conditional. BBA 97/3383 is listed by NBS as withdrawn. The 7.5 litre tin at about £3.73 per litre has three ratings, a DRW brand field and a China origin, while the title says Sandtex.
The first split is the wall. Use these paints on sound, dry cement render, pebbledash, concrete, and brick that is normally painted. Do not specify them for common, Fletton or engineering brick, for lime render, or below the damp-proof course. Dulux’s consumer page excludes Fletton brick. The Dulux FAQs exclude lime render. The second split is the film. Smooth or ultra smooth for existing texture and for flat render.
Buy litres for two coats at the rough-surface rate if the wall is dashed. Dulux Trade’s sheet says up to 16 m² per litre on smooth render and 4–6 m² per litre on pebbledash, not below 7°C and not above 80% relative humidity. Dulux’s consumer page says above 10°C and dry, and two coats. Leyland’s sheet says about 10 m² per litre on smooth surfaces. A coverage field that repeats the pack size, or that describes 5 litres on a 2.5 litre page, is not a spreading rate.
Three typical situations, each with a recommendation from this comparison.
You want about 2.5 litres, around £15 to £16, and you do not want a 5 litre tin left over. Leyland Granocryl white is about £15.17, at 4.6 from 2,120 reviews, with about 10 m² per litre on the listing. The manufacturer field says Johnstones.
You need 5 or 7.5 litres and the rough-surface rate, about 4–6 m² per litre on dash. Sandtex Microseal pure brilliant white, 5 litres, is about £23.90, at 4.6 from 2,867 reviews, and the bullets name render, roughcast and pebbledash.
You want the off-white, colour code F2EFE5, and you will finish the elevation from the same tin. Dulux Weathershield Jasmine White, 5 litres, is about £28.00, at 4.7 from 698 reviews. Do not mix it with a brilliant white on the same wall.
The top pick is Leyland Granocryl brilliant white 5 litre, with the highest score in this comparison (8.8 out of 10, from 1,395 amazon.co.uk reviews). The 5 litre Leyland tin scores 88 and is the best value: about £20.95, about £4.19 per litre, 4.6 from 1,395 reviews, with a cut for drying and opacity comments. Neither score is a laboratory test. On pebbledash, plan about 4–6 m² per litre. Leave the 7.5 litre tin with a DRW brand field, 3.5 from 3 reviews, off a Sandtex shortlist.
Leyland Granocryl brilliant white 5 litre
About £4.19 per litre at £20.95, with 4.6 from 1,395 reviews, the strongest price and pack balance among tins with a large review count.
Editorial
Peter F. is the editor for DIY & tools at productscompared.co.uk. Comparisons in this category are checked against amazon.co.uk listings, review evidence and public UK sources.
Guides on what to look for, how to use a product, and common mistakes.
Public UK sources and maker sheets for the VOC cap, coverage bands, weather window and the withdrawn BBA certificate. Shelf prices, stars and review counts are the amazon.co.uk lines in these eleven listings from 15 October 2026. Prices move.
This page contains affiliate links to amazon.co.uk with the tag pcuk26-21. A qualifying purchase can earn us a commission at no extra cost to you. Prices, stars and review counts are the UK listing lines from 15 October 2026. We did not run a laboratory test.
