The best welding goggles, compared.
Top pick: Laser 6724 – Highest score, 4.4 from 128 reviews, with EN 166 and over-spectacle use claimed on the listing. Best value: Portwest PW60BGR – About £7.28 with 4.2 from 163 reviews, if the delivered PW60BGR marking is verified. Updated October 2026.
Welding goggles hold a filter against the face for gas welding, brazing, or an arc weld where a helmet will not fit. The decision is the shade for the process, a named standard, and a seal that does not leak at the nose. A green lens with no number is not a shade, and a title that says TIG, MIG or arc does not replace one. They do not print a shade, and one reviewer reports a gap at the nose. Goggles can cover the eyes and still leave the cheeks and neck open to UV and spatter. The [welding goggles buying guide](/hub/soldering-and-welding/welding-goggles/sub/welding-goggles-buying-guide) puts process, shade, standard and seal ahead of price. Oxy-fuel and torch brazing can be a passive shade 5 goggle.
Welding goggles hold a filter against the face for gas welding, brazing, or an arc weld where a helmet will not fit. The decision is the shade for the process, a named standard, and a seal that does not leak at the nose.
Swipe for more
1-2 of 10
Personal buying guide
Question 1 of 2
What are you welding?
The Laser 6724 is a passive wide-vision goggle intended for gas welding, and its amazon.co.uk bullets claim EN 166 compliance and suitability over prescription spectacles. It has the highest review score in this set at 4.4 from 128 ratings, while its £16.75 price remains moderate. The amazon extract does not print a shade number, so that essential filter detail still needs checking against the product marking; Laser Tools' own page identifies the model as shade 5. The soft goggle format should accommodate more face shapes than hard auto-darkening shells, though one reviewer found a gap at the nose that admitted light. Another reports that the lens can come loose from the rubber housing, so it should be inspected before use. It needs no battery and suits a gas-torch workflow better than an arc process. For a buyer seeking a specified gas model, it is the top pick here, conditional on confirming the shade and achieving a complete seal.
Pros
Cons
Best for: Gas welding where the shade marking is confirmed and the goggle seals over the wearer's spectacles.
Less suitable: MIG, TIG or MMA arc welding, or any face shape that leaves a nose gap.
Specifications
Common questions
What standard does the listing name?
The bullets say the goggles meet EN 166 and are CE compliant. They do not print a shade number.
Can they go over spectacles?
The bullets say they are adjustable and suitable over personal spectacles. One UK review still found a gap at the nose that let light in.
Are they auto-darkening?
No. They are fixed wide-vision gas welding goggles. A review also says the lens can leave the rubber housing.
The YESWELDER LYG-R100A is the only auto-darkening pair in this comparison that states a dark range, 4/5-9/9-13, and includes a face shield for tight-access arc work. Its 12.3 x 3.5 cm viewing area is narrow compared with a helmet, but reviewers find the goggle format useful under cars and in other confined positions. The listing also claims optical class 1/1/1/1 and uses solar power with a CR2450 battery. Fit is the main uncertainty: some reviewers say the hard shell presses painfully unless the face shape suits it, and the clips can feel fragile. One unit reportedly stopped darkening after about a week, so the switching function needs checking before every weld. The supplied face shield matters because a UK reviewer reported facial sunburn when using the goggles without it. This is the strongest specified tight-access option in the set, but it is not a substitute for full helmet coverage on ordinary bench arc work.
Pros
Cons
Best for: Tight-access arc work where a stated dark range and the supplied face shield can both be used.
Less suitable: Long open-bench welds, untested use without the face shield, or faces that do not seal comfortably.
Specifications
Common questions
What shade does the listing state?
The bullets state 4/5-9/9-13, with a 1/1/1/1 optical claim. No EN 169 or EN 379 mark is named on the listing.
Is a face shield in the box?
Yes. The listing says the goggles can be used with or without it. A UK review says leaving the shield off left a sunburnt face.
What do the reviews say about fit?
UK reviews praise them under a car. Others say the hard shell hurts unless the face is flat, and one unit stopped darkening after about a week.
The Portwest PW60BGR is the lowest-priced passive gas goggle in this comparison at £7.28, backed by 4.2 stars from 163 ratings. Its bottle-green lens and gas-welding title indicate the intended job, but the amazon extract does not state a shade or standard. Portwest's own PW60 datasheet identifies shade 5 and names EN 166, EN 169 and EN 175, so buyers should verify that the delivered model and markings match rather than transferring those claims blindly to the listing. Reviews describe it as handy for short gas work, while nose discomfort is a recurring practical drawback. One UK reviewer regards it as suitable for burning gear rather than welding, which reinforces the need to match the marked shade to the actual process. The listing prints B008510J2U in the Amazon URL and B0H3WX8WTP in the technical details; these cannot be treated as one confirmed ASIN. It is the best-value option in the set when the delivered PW60BGR marking is verified.
Pros
Cons
Best for: Short oxy-fuel jobs after confirming the delivered PW60BGR lens and conformity markings.
Less suitable: Arc welding, or buying without resolving the listing and model identification.
Specifications
Common questions
Which ASIN is on the listing?
The amazon.co.uk URL is B008510J2U. The technical details on the same listing print B0H3WX8WTP. Both are recorded. They are not treated as one confirmed code.
Is a shade number given?
No. The title says bottle-green gas welding goggles, model PW60BGR. No standard is named on the amazon extract.
What do UK reviews say?
Buyers call them handy for short gas work and uncomfortable on the nose. One UK review limits them to burning gear rather than welding.
The XLTXWD glasses offer a cheap solar auto-darkening format, but the listing does not state either a shade range or a welding standard. Their 10 g weight and slim glasses shape may appeal where a bulky protector gets in the way. In practice, one reviewer says the glasses slid off when looking down, which is a serious fit limitation for positional work. Another pair arrived broken, so the modest 4.1-star average from 19 ratings does not remove durability concerns. A UK buyer also reported a red face after longer welds, underlining that these glasses do not provide full facial coverage. They may look convenient for a brief task, but the missing filter specification makes them difficult to match responsibly to arc current or process.
Pros
Cons
Best for: Only a buyer who can verify the filter specification and secure fit separately.
Less suitable: Longer welds, downward-facing work, or use without separate face protection.
Specifications
Common questions
Is a shade number printed?
No. The title says solar auto-darkening for argon arc, soldering, torching and brazing. No standard is named.
Do the reviews mention the face?
One UK buyer says longer welds need a separate face shield or the face goes red. Another says they arrived broken and slid off when looking down.
The UNISOPH goggles are a £12.99 solar auto-dimming option with a larger review base than most budget pairs here. The polycarbonate construction and 120 g weight suggest a more enclosed format than very light welding glasses. However, the listing extract states neither a shade nor a welding standard, and the reviews disagree on the core function. Some users report a rapid blackout, while several others say the lens never darkened; another mentions a fixed shade that was too dark. Light can also enter from above, according to a buyer who added their own cover. A 4.0 average from 211 ratings cannot resolve those contradictory switching reports. This is a budget pair with substantial user evidence, but not enough stated specification to recommend for a defined welding process.
Pros
Cons
Best for: A prospective buyer who can verify the exact lens specification and test the unit before exposure.
Less suitable: Anyone relying on the star average as proof that the filter will switch correctly.
Specifications
Common questions
What shade are they?
The listing does not state a shade or a standard. One UK review says dimming is fixed. Another mentions shade 13 and says it was too dark.
Do they darken?
The bullets say the lens darkens when arc light appears. Several UK reviews say it never darkened. Others report a fast blackout.
Is the face covered?
No face shield is listed. One buyer added a cover because light came in from above.
The Smallterm goggles are presented for welding, soldering and cutting at £9.89, yet the listing extract does not identify whether the lens is passive or auto-darkening. It also omits the shade, standard and power source, leaving no reliable way to match the product to a welding process. Three short UK reviews describe a nice fit, accurate description and good perceived quality. None of them records an actual weld, filter performance or protection from side light. The 4.0 average from 15 ratings is therefore weak evidence for a safety-critical product. One review even discusses fancy dress, which further limits how much the feedback says about workshop use. This pair should be treated as unspecified until the lens markings and instructions can be checked.
Pros
Cons
Best for: Inspection by a buyer who can confirm the physical lens markings before any welding use.
Less suitable: Selecting online for a known gas or arc process.
Specifications
Common questions
Are these auto-darkening?
The listing does not say. There is no shade, no standard and no power source.
What do the reviews cover?
Three UK reviews say the fit is nice, the item matched the description, and the quality was excellent. None describes a weld or a shade. One mentions fancy dress.
The DNTHYRIN glasses provide a very low-cost, lightweight format, but the listing extract does not state the shade, a welding standard or even the power arrangement. The title calls them auto-darkening glasses for arc welding, which is not enough to match the filter to a process. At 10 g in the package line they may be easy to wear, yet that figure says nothing about seal, side entry or facial coverage. The 3.8-star average comes from only three ratings, and there is no review text from which to judge switching reliability or comfort. There is also no stated face shield, so the cheeks and neck remain an unresolved issue for arc work. Until the lens marking and conformity information can be verified, the low price should not drive the decision.
Pros
Cons
Best for: Buyers who can independently verify the lens marking and intended process before use.
Less suitable: Choosing directly from the amazon.co.uk title for arc welding.
Specifications
Common questions
Does the listing state a shade?
No. The title says auto-darkening arc-welding glasses. Shade, standard and lens material are not on the listing.
What do buyers say?
The star rating is 3.8 from 3 reviews. The listing has no review text, so praise and faults are not recorded.
The Warmhm pack contains two flip-up goggles, but its £58.89 price is far above the other unspecified flip-up sets in this comparison. The listing title mentions home use and gives dimensions of 19 x 8 x 8 cm, with each stated weight at 165 g. It does not provide a shade number, welding standard or useful lens specification to explain the premium. The 2.6-star average is based on only three ratings, and there is no review text showing what failed or worked. A hinged dark lens can be convenient for torch work, but only when its marked shade matches the process. Here, neither the price nor the sparse rating evidence fills that gap. This is the easiest flip-up pack in the set to skip unless the seller supplies verifiable documentation before purchase.
Pros
Cons
Best for: Only a buyer who receives and verifies missing filter documentation before ordering.
Less suitable: Value-focused buyers, or anyone needing a confirmed gas-welding shade.
Specifications
Common questions
Why is the price £58.89?
That is the only price on the listing. The listing does not state a shade or a standard that would explain a higher band.
What do the three reviews say?
The star rating is 2.6 from 3. The listing has no review text.
The XZSKD pack supplies two flip-up goggles for £12.99 and names oxy-acetylene use in the title. A flip-up format can make alignment convenient because the clear view is available between operations and the dark lens can be lowered before exposure. The listing extract, however, gives no shade number, welding standard or lens material. There is also no star rating or review text, so fit, hinge durability and optical quality are unknown. The title's use of the word shade does not establish that the filters are shade 5 or suitable for a particular gas flow. At 220 g for the package, even the per-pair weight cannot be confirmed from the available information. The two-pack is economical only if the physical markings establish the specification you need.
Pros
Cons
Best for: A buyer able to inspect and verify both supplied filters before gas work.
Less suitable: Ordering as a confirmed shade 5 pair based on the title alone.
Specifications
Common questions
What shade is included?
The title uses the word shade and names oxy-acetylene welding. It does not give a shade number or a standard.
Is there a review score?
There is no star rating and no review text on the listing.
The Toddmomy listing offers two flip-up welding goggles for £15.79, with each pair stated at 19 x 8 x 8 cm and 200 g. The hinged filter can be practical for positioning between torch operations, provided it is lowered before exposure. Yet the available title and technical fields do not state a shade, a welding standard or even confirmed gas-welding suitability. An unanswered listing question asks whether the goggles are suitable for gas welding, which highlights the information gap rather than resolving it. There is no star rating and no review text to test claims about comfort, seal or hinge quality. The two-pack costs more than the comparable XZSKD set while supplying no stronger specification in this extract. It should not be treated as a gas-welding recommendation without checking the markings on the delivered product.
Pros
Cons
Best for: Inspection-led purchasing where the supplied lens markings can be checked before use.
Less suitable: Buyers needing a documented shade 5 gas goggle online.
Specifications
Common questions
Can the listing confirm gas welding use?
The title says flip-up welding goggles. A question on the listing asks about gas welding and is not answered. No shade is printed.
Are there reviews?
There is no star rating and no review text on the listing. The stated size is 19 x 8 x 8 cm and 200 g.
We compared 10 welding goggle listings on amazon.co.uk. The score is an editorial desk assessment of listing data, UK review signals and manufacturer information already recorded for this category. It is not a laboratory test and it is not a PPE certification check. Missing shade and standard information is deducted. Reports of failed darkening, a poor seal, breakage or exposed skin reduce the score even when the star average is positive. Listings with no review signal and no stated shade stay at the bottom rather than receiving a guessed score. The weights below sum to 100.
Filter specification
30%A stated shade or dark range that can be matched to the intended welding process.
Standards and coverage
20%A named eyewear or welding-protector standard, plus face coverage that matches the claimed use.
UK buyer evidence
20%The amazon.co.uk star average, review count and how specific the review comments are.
Practical design
15%Fit, seal, over-spectacle use, power arrangement and an included shield where the job needs one.
Value
15%Price judged only after the shade, the process and the available evidence are known.
Choose the process before the star rating. Gas welding, brazing and a tight-access arc weld are different filters. Then check the shade, a named standard and whether the rim actually meets your face.
Welding goggles are a welding filter held against the face. They are for gas welding, brazing, or an arc weld where a helmet will not fit. They can cover the eyes and still leave the cheeks and neck open to UV and spatter. They do not stop fume. Judge a pair by the shade for the process, a named British or European standard, and a seal that meets the face. A gap at the nose is a failed fit. Process comes first. Oxy-fuel and torch brazing can be a passive shade 5 goggle.
A title that says welding, TIG, MIG or arc is not a shade. Several listings in this set omit the shade number and any named standard. Match the process first, then the number on the lens.
Shade 5 is the gas-welding band. JSP Safety’s UK guide puts MIG on steel at about shade 10 or darker, on a face shield. Eyes-only goggles leave the cheeks and neck open.
UNISOPH has 4.0 from 211 reviews, and those reviews both report a blackout and say the lens never darkened. A star average does not prove an auto-darkening filter will switch. Test it before you weld.
Process comes first. Oxy-fuel and torch brazing can be a passive shade 5 goggle. MIG, TIG and MMA need a darker filter and face cover. BOC sells shade 5 in the UK for gas welding. JSP Safety’s UK guide puts MIG on steel at about shade 10 or darker, on a face shield. A title that says TIG, MIG or arc does not replace a shade, and a green lens with no number is not a shade. In this set the Laser 6724 bullets claim EN 166 and CE, and they do not print a shade.
The rim should meet the face. A gap at the nose is a failed fit, and one Laser 6724 reviewer reported exactly that. Over prescription glasses only if the listing says so and the seal still closes. For arc work, fit the face shield from the box or use a helmet. The YESWELDER includes a shield, and a UK reviewer reported facial sunburn when it was left off. XLTXWD reviews include a red face and glasses that slid off when looking down. UNISOPH reviews say light can enter from above.
Three typical situations, each with a recommendation from this comparison.
You need a named shade around 5 and a seal that meets the face. The Laser 6724 is about £16.75, with 4.4 from 128 reviews. The bullets claim EN 166 and a fit over spectacles, but they do not print a shade, and one reviewer reports a nose gap. It is the wrong filter for MIG, TIG or MMA.
A wheel arch or other confined weld may need goggles rather than a helmet. The YESWELDER LYG-R100A states 4/5-9/9-13, includes a face shield and is about £37.99, with 4.3 from 204 reviews. Fit is not universal, and a helmet is still the better cover for open-bench arc work.
The Portwest PW60BGR is about £7.28, with 4.2 from 163 reviews, and reviews describe it as handy for short gas work. The listing extract omits shade and standard, the nose can be uncomfortable, and the listing prints two ASIN strings. Confirm the delivered PW60BGR marking before you weld.
For gas welding in this set, the top pick is the Laser 6724 at about £16.75. It has the highest score, 4.4 from 128 reviews, and the bullets claim EN 166 and a fit over spectacles. Confirm the shade marking and the nose seal before you rely on it. The best value is the Portwest PW60BGR at about £7.28, with 4.2 from 163 reviews, once the delivered model marking is checked. The YESWELDER LYG-R100A is the tight-access arc option that states a dark range and includes a face shield. None of these scores is a laboratory test, a certification, or a claim about every welding goggle on sale in Britain.
Laser 6724
Highest score, 4.4 from 128 reviews, with EN 166 and over-spectacle use claimed on the listing.
Portwest PW60BGR
About £7.28 with 4.2 from 163 reviews, if the delivered PW60BGR marking is verified.
Editorial
Peter F. is the editor for DIY & tools at productscompared.co.uk. Comparisons in this category are checked against amazon.co.uk listings, review evidence and public UK sources.
Guides on what to look for, how to use a product, and common mistakes.
Public UK sources named in the research digest, plus the amazon.co.uk listings in this set. BOC UK goggle prices were noted on 16 October 2026. No laboratory test was run.
This page contains affiliate links. If you buy through them, we may earn a commission at no extra cost to you. Prices and review counts are from amazon.co.uk listings. We did not lab-test these goggles.
