The best mini soldering irons, compared.
Top pick: FBBEVWBK 60 W iron Best value: HANDSKIT SI Series 90 W – About £13.50 for a 90 W iron with a desoldering pump, six 900M tips and wire listed. 4.5 is shown and the review count was not published. Tip life is criticised in at least one UK review. Updated October 2026.
A mini soldering iron is a compact pen or a slim mains pencil for electronics, jewellery and the occasional wire joint. The eleven amazon.co.uk listings split into or battery pens and mains kits on a short lead. Cordless suits a vehicle or a desk with no socket nearby. A mains iron at 60–100 W holds heat for a longer session, and it ties you to that lead. A low-wattage battery pen, including the 4 W row, struggles on thick wire and on desoldering. Adjustable temperature matters more for a fine pad than an eight-second heat-up line. Rosin flux fume needs ventilation on a regular session. It is either or battery cordless, or mains-powered with a short lead. Buyers are hobbyists, console and drone repairers, jewellers, and people who need to reach a tight spot or work away from a bench socket. How to choose is set out in the [mini soldering iron buying guide](/hub/soldering-and-welding/mini-soldering-iron/sub/mini-soldering-iron-buying-guide).
A mini soldering iron is a compact pen or a slim mains pencil for electronics, jewellery and the occasional wire joint. The eleven amazon.co.uk listings split into or battery pens and mains kits on a short lead.
38 products checked · 74 hrs invested · +31,200 readers
Swipe for more
1-2 of 11
Personal buying guide
Question 1 of 2
Where will you solder?
The FBBEVWBK at about £9.56 is the cheapest row and shows 5.0 from nine UK reviews, so the average says less than it looks. The listing specifies 60 W, adjustable heat up to 400 °C and a 140 g pencil that is easy to store. Positive text is brief and job-specific. There is no broad trail on tip life, sleep features or desoldering recovery. Sixty watts can solder fine wire and will lag on heavier connectors next to a 90 W kit that costs a few pounds more. Treat it as a spare or a trial iron. A stand is listed. The components line is the iron, not a full repair bundle.
Pros
Cons
Best for: You solder rarely, you already own solder and tips, and you want the lowest price.
Less suitable: Console repair, or any job where both review depth and wattage matter.
Specifications
Common questions
Why does a 5.0 average not lead the table?
Nine reviews is a short file. The HANDSKIT at 4.4 from 827 already records tip wear and ordinary accessories. A perfect average on nine texts cannot show those faults. The shelf price is about £9.56 and the stated power is 60 W.
What wattage and temperature are listed?
60 W, adjustable, with a ceiling of 400 °C on the listing. That is below the 180–480 °C HANDSKIT range and below the 80 W and 90 W mains rows. Weight is 140 g.
Does the box include a pump?
The captured kit extras line is the soldering iron. A stand is listed. A desoldering pump is not in that components field. Tips are mentioned in bullets without a count you can put in the table.
The ingoodtle cordless kit at about £14.89 is 4.5 from 19 UK reviews, which is positive and still a small sample next to the HANDSKIT hundreds. It combines USB-C charging, an LCD range of about 260–420 °C and a 220 g body that suits a drawer. Verified buyers like fast heat for small jobs. At least one notes the charge does not hold a longer session, which is the usual cordless limit. Wattage is not printed on the technical table, so judge it on the wire you actually solder, not on a missing number. Keep the joints small. It is not a desoldering tool for a controller.
Pros
Cons
Best for: Occasional portable tacks when you already own solder and you want a light pen under £15.
Less suitable: A long session, or thick wire that needs the tip to stay hot.
Specifications
Common questions
How is the ingoodtle powered?
It is a battery pen with USB-C charging. Wattage is not stated. The LCD range on the listing is about 260–420 °C. Weight is 220 g and a stand is listed. The star line is 4.5 from 19 reviews.
Will the battery last a repair session?
At least one UK review says the charge does not hold through a longer session. Nineteen reviews is too small to call that universal. Plan short joints, and do not treat use-while-charging as unlimited runtime.
Is it suitable for desoldering a connector?
Not on the evidence here. No wattage is printed, the temperature ceiling is lower than several rivals, and the review file is 19. A mains 80–90 W iron is the recovery tool for a joint that pulls heat out of the tip.
At about £13.50 the HANDSKIT SI Series mirrors the 90 W adjustable iron, with ceramic heat, a calibration offset, temperature memory and sleep mode. It undercuts the sibling by a few pence and the components line adds a desoldering pump and hook-up wire. Amazon shows 4.5, and the UK review count was not published in this capture, so the 827-review sibling is the behaviour file. It is not a second sample of those 827. Buyers who did leave text praise a complete session in the box. At least one month-long owner likes the iron and criticises tip life. Weight is 530 g. You are buying accessories per pound, on HANDSKIT tips rather than a name-brand consumable.
Pros
Cons
Best for: You want a pump, tips and wire at the lowest HANDSKIT price and you can accept a missing review count.
Less suitable: You need hundreds of reviews on this exact ASIN before you trust heat recovery.
Specifications
Common questions
How is this HANDSKIT different from the £13.99 kit?
Both state 90 W and 180–480 °C. This ASIN is about £13.50 and lists a desoldering pump and hook-up wire. The other ASIN has 4.4 from 827 reviews. This capture shows 4.5 and does not publish a count. Do not add the two files together.
Does it include a stand and tips?
Yes. The components line names anti-static tweezers, a desoldering pump, a stand, soldering iron tips and wire. The summary used here is six 900M tips. Weight is 530 g.
Why is the review count zero on the page score?
The stored listing shows 4.5 and does not publish a UK review count. The count field is therefore 0, not a claim of no buyers. Lean on the feature list and on the sibling ASIN for written themes. One review that is present criticises tip life.
Across 827 amazon.co.uk reviews, the HANDSKIT 90 W kit at about £13.99 averages 4.4 for adjustable 180–480 °C work, with an LCD, six 900M tips and a repair bundle. UK buyers call it useful for occasional small, detailed jobs. Several note that technique still takes practice, and that tips oxidise, calibration is quirky, or the accessories feel basic. PID control and a 15-minute sleep mode are listing claims. What matters on a through-hole pad is mains wattage and whether the tip recovers, which is where this row beats the battery pens. Weight is 350 g. It is the default mains mini kit when you care about review depth rather than a 5.0 from nine reviews.
Pros
Cons
Best for: You want a mains mini kit and a long UK review file for small electronics jobs.
Less suitable: You have no socket, or you want a bench station with a separate iron rest and a bigger supply.
Specifications
Common questions
Is the HANDSKIT 90 W kit mains or cordless?
Mains. The power source is corded electric, at a stated 90 W, with adjustable temperature from 180–480 °C. It needs a UK socket. It is not a battery pen.
What is in the HANDSKIT box?
The listing names a stand, soldering tips, a tip cleaner and wire, and the review summary adds six 900M tips plus a pump and wick. Check the live components line before you assume every accessory is in your parcel.
What do the 827 reviews actually say?
Buyers call it good value for occasional small jobs. They also mention tips that oxidise, calibration quirks and accessories that feel basic. The average is 4.4, not a clean sweep. There was no lab measurement of tip temperature.
The Beizkna at about £15.99 packs an 80 W iron, five tips, a desoldering pump, lead-free wire, tweezers, a stripper and a case into one box. Listing stars show 4.4 and the UK review count was not published in this capture, so a strong category rank is not the same as a deep review file. Text that is present mentions quick heat-up and decent results for occasional board work, including plastic cutting. It is still a budget ceramic pencil. The box temperature line reads 520 °C. Check that dial against the alloy you use. Weight is 450 g. Lead-free wire in the box does not remove the need to ventilate. The 15-second heat claim was not timed here.
Pros
Cons
Best for: A first mains kit under £20 when you want a pump and tips and you can accept a missing count.
Less suitable: You want a published review count on this ASIN, or a lighter tool than 450 g.
Specifications
Common questions
What does the Beizkna kit include?
The listing names the iron, five tips, a desoldering pump, 50 g of lead-free solder, tweezers and a case. A stand is listed. Stated power is 80 W. The box temperature figure is 520 °C. Weight is 450 g. The shelf price is about £15.99.
Is there a review count?
This capture shows 4.4 and does not publish a UK review count, so the count on this page is 0. A best-seller rank is not a substitute. Buyers who left text mention quick heat and occasional board work.
Is 80 W enough for small electronics?
It is in the same band as the 90 W mains pencils and well above the 4–16 W cordless rows. It is still a budget iron. Verify the dial for lead-free solder, and ventilate. The 15-second heat-up line is a seller claim.
The Aucanla mains kit at about £27.99 is 4.3 from 473 UK reviews and lists a 90 W ceramic heater with adjustable temperature. That is continuous power the cordless pens here do not match on recovery. Reviewers often mention fast heat-up and a compact body that replaced an older station with a stiff cable. The components line names mainly the stand, so you may still buy solder, a pump and tips separately. At least one UK buyer reports the iron failing after about two months. Budget mains pencils are not workshop stations. Weight is 490 g. A clean Celsius ceiling is not in this capture, and one box line is in Fahrenheit, so check the dial you actually get. For through-hole work at a fixed desk, the 90 W line is the spec that matters.
Pros
Cons
Best for: Bench wire and board work where you want 90 W and a long review file, and you already own consumables.
Less suitable: Field repairs where a lead is awkward, or you want a pump in the box at a lower price.
Specifications
Common questions
What power does the Aucanla listing state?
90 W, corded, with adjustable temperature. Weight is 490 g. The shelf price is about £27.99. A single Celsius maximum is not clean in this capture. The star line is 4.3 from 473 reviews.
What comes in the box?
The captured extras line is a soldering iron stand, and tips are mentioned in the bullets without a firm count. Solder and a pump are not established as included. Compare that with the HANDSKIT rows if you want a bundle.
What failed in the reviews?
At least one UK buyer reports the iron failing after about two months. Other texts praise fast heating. 473 reviews is a real sample, and that early failure is part of it, not a lab result.
The FROGBRO LD006A-Pro at about £30.67 is 4.0 from 490 amazon.co.uk reviews, with an 11 W heater, a 2500 mAh battery and adjustable heat up to 520 °C on the listing. Many UK buyers describe fast warm-up and a sensor that wakes the tip when you pick the pen up, which suits jewellery tacks and occasional PCB work. The trail is noisier than the headline. Several texts mention the tip losing temperature quickly, unreliable heat after a tip change, or the unit feeling dear for what you get. An LED spotlight and an alloy barrel are kit extras. They do not replace mains recovery on a thick lead. Weight is 340 g. Compare the runtime claim with how many joints you do in one sitting.
Pros
Cons
Best for: Portable jewellery or hobby electronics when the joints stay small and the session stays short.
Less suitable: Continuous desoldering or thick wire that needs the tip to recover at once.
Specifications
Common questions
What battery and wattage does the FROGBRO list?
11 W and a 2500 mAh battery, cordless, with adjustable temperature up to 520 °C on the listing. Charging is USB. Weight is 340 g. The price is about £30.67. The star line is 4.0 from 490 reviews.
Why do reviews mention heat drop?
Several UK texts say the tip loses temperature mid-job, or that heat is unreliable after a tip change. Fast warm-up and a wake sensor are the positive side of the same file. 11 W will not hold a large joint the way a 90 W mains iron does.
Is a stand included?
Yes. The listing includes an iron stand. A motion sensor that wakes the tip is also on the listing. That does not add wattage. Keep a proper rest, and do not lay the hot tip on the desk.
Across 37 amazon.co.uk reviews, the SZ-KARIDGE at about £26.99 heats quickly for cable tacks and small workshop jobs. Buyers praise a case with three tips, paste and Type-C charging. The 1600 mAh cell and the 180–450 °C range suit a short electronics session away from a socket. Several verified buyers report slow charging, fast battery drain and the tip cooling mid-joint on anything heavier than a small wire. Heat maintenance matters more than the eight-second marketing line, which was not timed here. Sleep after 60 seconds of idle helps safety and can interrupt a repair if you pause to look at the board. Treat use-while-charging as a listing claim. Weight is 320 g. Wattage is not stated.
Pros
Cons
Best for: Quick wire tacks when you move between desks and you do not need a mains lead.
Less suitable: Desoldering a controller, or any job where the tip must stay hot through several large joints.
Specifications
Common questions
Does the SZ-KARIDGE charge by USB-C?
Yes. The listing names Type-C charging, a 1600 mAh battery, three interchangeable tips, solder paste and wire. Temperature is adjustable from 180–450 °C. Wattage is not stated. Weight is 320 g. The price is about £26.99.
What do the 37 reviews complain about?
Slow charging, fast discharge and the tip cooling on heavier joints. Praise is for small repairs and the case. Sleep after 60 idle seconds is a safety feature that can cut heat if you pause. The eight-second heat-up line was not measured here.
Can you solder while it charges?
The listing claims use while charging. Treat that as a claim until you confirm it on your unit. It is not a substitute for a mains iron on a long session, and 37 reviews is a modest file.
At about £19.98 the Voktta looks cheaper than the £30 cordless kits, and the amazon.co.uk score is 2.8 from seven UK reviews. That file is too thin to treat as a reliable signal, and the average is low enough to be a warning. The listing claims 15 W, Type-C charging and adjustable heat to 450 °C. The title includes a stand. The components field is thin next to the fuller kits. With seven reviews you cannot see whether heat sag or charge life is the weakness. You only know the average is poor. Weight is 270 g. If you need a battery pen, a listing with hundreds of UK texts tells you more about mid-joint behaviour.
Pros
Cons
Best for: Only if you accept a seven-review listing at 2.8 and you keep the job tiny.
Less suitable: Electronics repair or desoldering, where you need evidence of heat recovery.
Specifications
Common questions
Why is the Voktta scored down?
It is 2.8 from seven amazon.co.uk reviews. A single-digit count cannot show a pattern, and the average that does exist is poor. The listing still claims 15 W, Type-C charging and heat up to 450 °C, at about £19.98.
Does it include a stand?
The product title says the kit includes a stand, and three tip styles are in the bullets. The captured components field is sparse and centres on tips. Weight is 270 g. Confirm the stand on the live page.
Is 15 W enough?
15 W is above the 4 W WORKEASE row and in the same cordless band as the 11 W and 16 W pens. It is far below 60–90 W mains. Seven reviews do not show whether that 15 W holds a joint.
The SEESII S01 at about £84.99 is the dear outlier. The listing states 16 W maximum, cordless or wired through the charge cable, a 2600 mAh battery, an HD screen, a foldable stand, a protective cap, four C210 tips and a desoldering pump. It promises seven-second heat and 10 °C steps between 200 °C and 450 °C, aimed at board work rather than jewellery only. This capture has no UK star rating and no review count, so every performance line is seller text. Weight is 635 g with the kit. That is portable beside a bench station and it is not pocket-sized. Choose it when you want C210 tips and hybrid power, and you accept station money without a UK review file. The seven-second claim was not timed here.
Pros
Cons
Best for: You want C210 tips and a structured cordless kit, and you can buy before a UK review file exists.
Less suitable: You need proven UK feedback before spending about £85.
Specifications
Common questions
Can the SEESII S01 run from the cable?
The listing says cordless and a wired mode on the charging cable. Stated maximum power is 16 W, with a 2600 mAh battery. That hybrid claim was not tested here. There is no UK star line in the capture. The price is about £84.99.
Which tips does it use?
Four C210 tips are listed, plus a desoldering pump, sponges and a charging cable. C210 is a tip family, not a promise that every third-party tip will fit. Temperature steps are listed from 200–450 °C. Weight is 635 g.
Why is there no star rating?
The stored amazon.co.uk capture has no UK star rating and no review count. Claims about seven-second heat and the HD screen are seller text. 16 W still will not recover like a 90 W mains iron.
The WORKEASE at about £21.99 lists a 4 W battery pen and a fixed high start: press for five seconds until the indicator turns green, and the tip is aimed at 450 °C. That wattage is far below the 60–90 W mains kits and below the 11–16 W cordless rows, so expect slow recovery on anything thicker than fine wire. The box mentions a 2000 mAh cell and two hours of operation as marketing figures. This capture has no UK review text to confirm runtime. Accessories include tips, tin wire and a bracket. There is no adjustable dial for a delicate pad, despite a generic adjustable flag on the comparison grid. Weight is 150 g. Unless you only tack thin leads, a higher-wattage mains iron or a mid-tier cordless pen is the clearer electronics tool.
Pros
Cons
Best for: Occasional fine-wire tacks, if you accept 4 W and no UK review file.
Less suitable: PCB desoldering, controllers, or any joint that pulls heat from the tip.
Specifications
Common questions
How do you turn the WORKEASE up?
The listing describes a press of about five seconds until the indicator turns green, with the tip aimed at 450 °C. It does not describe a dial for a lower pad-safe temperature. Stated power is 4 W. There is no UK review line in this capture.
What battery is listed?
A 2000 mAh cell, and a marketing line of about two hours. That runtime was not measured here. Charging is USB. Weight is 150 g. The shelf price is about £21.99. Tips, tin wire and a bracket are listed.
Is 4 W enough for a wire joint?
Only for fine wire, and even then recovery will be slow if the joint sinks heat. 4 W is the lowest stated power in this set. A mains 60–90 W iron is the alternative when the joint is larger. No UK reviews confirm the 4 W behaviour.
Eleven amazon.co.uk listings were scored for this page. Weights sum to 100. A wattage, a heat-up time and a temperature range are seller claims, not a measured tip. There was no lab test. A star average with no published count, or with fewer than about 30 reviews, is cut back. A bench station was left off this page. Prices are the captured shelf figures.
Amazon evidence
30%Star rating on amazon.co.uk, with a hard deduction when the count is under about 30, under 10, or when the capture publishes a star and no count. A missing star line scores as no evidence.
Listing fit
30%Mains or cordless for the job, stated wattage, adjustable temperature, a stand or cap, and tips the box actually names. A 4 W pen does not score as a 90 W iron. Use-while-charging stays a claim.
Review outcome
25%UK notes on heat sag mid-joint, slow charging, tip life, early failure and whether the kit matches the bullets. Thin files stay low even at 5.0.
Value
15%Shelf price in GBP against wattage and the accessories named. The fullest 90 W mains kit at the lowest price scores highest here. A low price does not erase seven reviews at 2.8.
The checks run in this order: mains or cordless, wattage and heat recovery, temperature control, battery and charging, then tips, a stand and price. The table is the eleven listings. None of these irons was timed or temperature-tested in a lab. A heat-up slogan stays a seller claim.
A mini soldering iron in this UK set is a compact pen or a slim-barrel iron for electronics, jewellery and occasional wire work. It is either USB-C or battery cordless, or mains-powered with a short lead. Buyers are hobbyists, console and drone repairers, jewellers, and people who need to reach a tight spot or work away from a bench socket.
Battery pens in this set state 4–16 W, or no wattage at all. Reviews of the FROGBRO and the SZ-KARIDGE mention the tip cooling mid-joint. A mains 90 W iron is the recovery tool. A cordless claim of use-while-charging is not a station.
Heat-up seconds are seller lines. They were not timed here. What the reviews discuss is whether the tip stays hot on the second and third joint. Sleep mode can also cut the heat if you pause to look at the board.
Rosin flux fume is an asthma risk for regular work. HSE points to local exhaust, a lower temperature, and keeping your head out of the plume. A wet sponge that steams is a separate burn and tip problem. Use a proper rest.
Decide mains or cordless before the brand. Mains rows here are the two HANDSKIT 90 W kits, the Aucanla 90 W iron, the Beizkna 80 W kit and the FBBEVWBK 60 W iron. They hold heat while the plug is in. Cordless rows are the SZ-KARIDGE, the FROGBRO, the ingoodtle, the Voktta, the SEESII and the WORKEASE. They run out of cell, and several reviews say the tip cools on a larger joint. Stated cordless power is 11 W, 15 W, 16 W or 4 W. The SZ-KARIDGE and the ingoodtle do not print watts.
Count the tips and the stand in the components line, not in the lifestyle photo. The £13.99 HANDSKIT lists six 900M tips, a pump and a wick, and 827 reviews. The £13.50 sibling lists a pump and six tips, and it has no published count. The Beizkna at about £15.99 lists five tips, a pump, lead-free wire and a case, with 4.4 shown and no count. The FBBEVWBK at about £9.56 is close to an iron only, at 5.0 from nine reviews.
Three typical situations, each with a recommendation from this comparison.
You want adjustable heat and a review file for through-hole and the odd small joint. The HANDSKIT 90 W kit at about £13.99 is the top pick: 4.4 from 827 reviews, with an LCD range of 180–480 °C. Reviews mention oxidising tips and basic accessories.
You want a pump, tips and wire in the box and you will accept a star line with no published count. The HANDSKIT SI Series at about £13.50 is the best value. One UK review criticises tip life. Behaviour clues sit on the sibling ASIN, not on this count.
You want a cordless pen and a long review file. The FROGBRO LD006A-Pro is 4.0 from 490 reviews, at about £30.67, with 11 W and 2500 mAh stated. Reviews repeat heat drop mid-job. It is not a mains 90 W iron.
The top pick is the HANDSKIT 90 W kit, at about £13.99, with 4.4 from 827 reviews, an LCD range of 180–480 °C and six 900M tips plus a pump and wick on the listing. Reviews mention oxidising tips and a kit that still needs practice. The best value is the HANDSKIT SI Series at about £13.50, with a pump and six tips listed and 4.5 shown without a published review count. A 5.0 from nine reviews on the £9.56 iron does not lead. Cordless pens in this set are for short joints. The SEESII S01 at about £84.99 has no UK star line in the capture.
HANDSKIT SI Series 90 W
About £13.50 for a 90 W iron with a desoldering pump, six 900M tips and wire listed. 4.5 is shown and the review count was not published. Tip life is criticised in at least one UK review.
Editorial
Peter F. is the editor for DIY & tools at productscompared.co.uk. Comparisons in this category are checked against amazon.co.uk listings, review evidence and public UK sources.
Guides on what to look for, how to use a product, and common mistakes.
Sources taken from the research digest. Listings were checked in the October 2026 capture.
This article contains affiliate links. If you buy through these links we may earn a small commission, at no extra cost to you. Prices, stars and review counts come from stored amazon.co.uk listings. We did not run a lab test.
