The best laminate cutters, compared.
Top pick: WORKPRO 340 mm laminate cutter – Highest score in this set, with 4.6 from 453 reviews, a consistent 340 mm listing, wheels and a 600-grit stone. Best value: Zozen laminate cutter with wheel – Lowest price among the wheeled tables, at about £91.99, with finished thin LVT in the UK notes. Updated October 2026.
A laminate cutter on the UK market is a manual guillotine: a lever and a blade, with no motor and no BS 1363 plug. You buy one to cross-cut laminate or rigid vinyl beside the row you are laying. It does not rip a long plank, undercut a door jamb, or notch a pipe. Judge a cutter by plank width, by a thickness UK reviewers have actually cut, and by whether you can push the handle. Around 12 mm the reviews split, so a title maximum is not a clean cut every time. Width, thickness and a rip are set out in the [laminate cutter buying guide](/hub/flooring-tools-and-accessories/laminate-cutter/sub/laminate-cutter-buying-guide). These scores are listing judgements, not a cutting test. A lever and a blade cross-cut a board beside the row. The six tools here split into a light shear and a heavy bench table.
A laminate cutter on the UK market is a manual guillotine: a lever and a blade, with no motor and no BS 1363 plug. You buy one to cross-cut laminate or rigid vinyl beside the row you are laying.
22 products checked · 64 hrs invested · +21,400 readers
Swipe for more
1-2 of 6
Personal buying guide
Question 1 of 2
How wide is the plank?
The WORKPRO W101019A is a wheeled bench guillotine listed at £139.99, with a stated 340 mm width and 16 mm depth, and amazon.co.uk shows 4.6 from 453 reviews. A UK reviewer laid 8 mm laminate from B&Q at 315 mm wide on it, and another reported cuts on 10 mm and 12 mm boards. A different reviewer returned the tool because 12 mm laminate did not come off cleanly, so the 16 mm line is the seller’s claim, not a settled result. The item weight is 10.7 kg, which is a cupboard and a carry problem next to the 2 kg Wolfcraft in this set, and a review said the first cuts shattered until the offcut was supported. Sharpening stories split: one reviewer said every 15 cuts, another finished three bedrooms without touching the included 600-grit stone. A lengthwise rip is not listed, and a UK review says it does not do length cuts. Assembly uses the hex keys in the box; one UK review put that at about 10 minutes.
Pros
Cons
Best for: You are cross-cutting 8 mm laminate up to about 315 mm wide and you can lift a 10.7 kg table.
Less suitable: A 12 mm room you need clean every time, a rip along the last row, or a flat where you cannot store a heavy cutter.
Specifications
Common questions
Does the WORKPRO cutter need mains power?
No. The listing describes a manual lever. There is no voltage and no BS 1363 plug.
Will it cut along the length of a plank?
A lengthwise rip is not listed as a feature. A UK review says it does not do length cuts.
What do you have to assemble?
It is not tool-free. Hex keys are in the box, and a UK review put assembly at about 10 minutes.
The MAIHUITE listing, named in the description rather than a Brand field, is £149.99 for a 330 mm manual cutter, and amazon.co.uk shows 4.5 from 245 reviews. The title says a safety locking latch and boards up to 17 mm, covering laminate, SPC, LVT, vinyl, and engineered wood. Reviewers report SPC cutting easily, plus 8 mm and 12 mm laminate, and one user said they cut 14 mm heavy-duty laminate. Another said it struggled on 10 mm despite the 17 mm claim and that the chop can kick, so those two reports stay side by side rather than a blended thickness. A further reviewer said the blade screws would not hold the blade, and one person said they could not operate the lever themselves. Weight is not stated on the listing. A review describes assembly as four bolts. It is the dearest cutter here, and the latch is named in the title without an explanation of how it engages.
Pros
Cons
Best for: You want a 330 mm table and you will test a scrap of your own board, including if that board is only 10 mm.
Less suitable: Anyone who cannot put real force on a lever, or a buyer treating 17 mm as a guaranteed cut.
Specifications
Common questions
Does this cutter need electricity?
No. The bullets describe manual cutting with no electricity.
Is the 17 mm thickness a measured result?
17 mm is the title claim. Reviews include easy cuts and one report of a struggle at 10 mm. The comparison does not turn the title into a test.
Is there a safety latch?
The title says safety locking latch. The bullets do not explain how it engages.
The Zozen cutter is £91.99, the lowest price among the wheeled tables here, and amazon.co.uk shows 4.4 from 234 reviews. The title says 33 cm while a bullet says a maximum cutting width of 31 cm and a maximum thickness of 13 mm, so both width figures have to stay visible. Reviewers report a whole ground floor of 8 mm LVT and about 50 square metres of 5 mm LVT herringbone with the blade still sharp. The same listing includes trouble getting a clean cut on 12 mm laminate, and one reviewer said they would stay around 6–7 mm. Screw heads broke during assembly for one buyer, and another said the blade was worn after about 200 boards of 8 mm laminate and asked where to buy a spare, which the listing does not name. The chain brake bar is the lock that puts the handle where it cannot cut. Rubber wheels are listed. A full-length rip is not specified.
Pros
Cons
Best for: You are laying thin LVT or 8 mm laminate across a room and you want wheels and a lock without the £140 band.
Less suitable: A 12 mm laminate floor, or a job where you need one agreed width on the listing.
Specifications
Common questions
How wide is the Zozen cutter?
The title says 33 cm. A bullet says a maximum cutting width of 31 cm. Both figures are on the listing, so the comparison shows both.
Can you lock the blade?
The listing describes a chain brake bar that puts the handle in a state where it cannot cut.
Does it include a spare blade?
No spare blade is listed. A UK review asks where to buy one after the blade wore down.
The CutTool Ltd listing, with no Brand field, is a 330 mm cutter at £109.00, and amazon.co.uk shows 4.1 from 2,993 reviews, the second-largest count in this set. The box adds a 600-grit oilstone, a tapping block, a pull bar, and 20 spacers, which is the laying kit the other five do not match. The bullets used here do not state a millimetre thickness. Reviewers report clean cuts on 8 mm laminate, including boards about 300 mm wide, and poor results on 12 mm. One said 15 mm engineered wood was beyond any reasonable pull on the bar. Another said it cuts across the width and not along the length, and that the tool is bulky to store. A bullet says the stock is international and sold from abroad, so fit and labelling may differ from a UK-packed tool. Blade supply later is a worry in one review, not a spare-part number.
Pros
Cons
Best for: You want a 330 mm cutter and a small laying kit for 8 mm boards, and you will check thickness on a scrap.
Less suitable: 12 mm laminate, 15 mm engineered wood, or a last-row rip.
Specifications
Common questions
What else is in the box besides the cutter?
The listing includes a 600-grit oilstone, a tapping block, a pull bar, and 20 spacers.
Does the listing state a maximum thickness?
The bullets do not state a millimetre limit. Reviews discuss 8 mm successes and weak 12 mm results, which is not a new specification.
Will it rip a plank lengthways?
A UK review says it cuts across the width and not along the length.
The Roughneck ROU36010 is the narrow manual cutter in this set, listed at £41.38, and amazon.co.uk shows 3.8 from 121 reviews. The bullet states boards up to 11 mm and a maximum cutting width of 200 mm, with a 90° support bar, a V stand, and an all-metal body with padded feet. A reviewer said it cannot be used on extra-wide laminate, which follows from that 200 mm figure, and Flooring King’s wide-plank range of about 190–245 mm is already tight in a jaw this size. Buyers who expected 12 mm report a poor cut, though the listing itself says 11 mm, not 12 mm. Reviews describe a cleaner top and a ragged back, in the same pattern as the Wolfcraft, and they mention allowing about a centimetre and nibbling a tail of waste. There are no wheels and no stated lengthwise cut. It is the lowest shelf price here, and it is the wrong tool as soon as the plank is wider than 200 mm.
Pros
Cons
Best for: Your planks are under 200 mm wide and at or under 11 mm, and you want the lowest spend for straight end cuts.
Less suitable: Wide planks, a 45° cut that needs more table than the face width, or 12 mm laminate.
Specifications
Common questions
How wide a plank fits the Roughneck?
The listing states a maximum cutting width of 200 mm (8 inches). A wider plank does not fit that figure.
Does the listing say 12 mm?
No. The bullet says boards up to 11 mm. Reviews that expected 12 mm report a poor cut.
Does it need a plug?
No electrical specification is given. The listing presents it as a manual alternative to a power saw.
The Wolfcraft LC 600, model 6937000, is £52.95, and amazon.co.uk shows 3.6 from 3,792 reviews, the lowest stars and the largest count here. The bullet matches the maker’s UK page on thickness: standard laminate up to 8 mm, or up to 11 mm when the board has integrated footfall sound insulation, at a stated bullet weight of 2 kg. Wolfcraft’s own page gives a cutting width up to 465 mm; the Amazon comparison cell does not state a width, so that 465 mm figure belongs to the maker page. Take the stop off and the listing says you can cut lengthways on the serrated bars, which the heavy tables in this set do not claim. Reviewers describe a cleaner top and a ragged underside, and several say thicker boards would not shear, including one who put a practical limit around 6 mm. A UK review bought it for vinyl laminate and reported ruined boards. The handle has to be fitted. At 2 kg it is the tool you can hang up, and it is also the most divided record in the set.
Pros
Cons
Best for: You are cross-cutting standard laminate at or under 8 mm, you may need a short lengthwise cut, and you want a light tool.
Less suitable: Vinyl plank, 12 mm laminate, or a buyer who needs the Amazon page itself to state the cutting width.
Specifications
Common questions
How thick a laminate board does the LC 600 listing allow?
The bullet says standard laminate up to 8 mm, and laminate with integrated footfall sound insulation up to 11 mm.
Can you cut along the plank?
Yes in the listing, once the stop is removed, using the serrated bars. That is the longitudinal cut, not a promise about every board thickness.
Does it cut vinyl plank?
Vinyl is not a stated function in the Amazon bullets. One UK review bought it for vinyl laminate and reported ruined boards.
Six amazon.co.uk listings were scored on 20 October 2026 from the star line, review volume, how complete the listing is, UK review notes, and the shelf price in GBP. The score is not a cutting test, and a 4.6 from 453 ratings is not a proved 16 mm cut. Weights are stars 30, review volume 15, listing completeness 25, UK fit 20, and price 10. A title thickness that a review contradicts is a deduction, not a sixth weight.
Stars
30%Amazon stars scaled to 30 points: stars divided by 5, times 30, rounded half up. The star line stays the amazon.co.uk figure. It is not multiplied by 20 to invent a score.
Review volume
15%Up to 15 points, capped so a large divided file cannot outrank a coherent listing on count alone. 2,000 or more ratings score 14. From 100 to 1,999 ratings score 12.
Listing completeness
25%Up to 25 points when width, thickness, weight, and the box contents agree. The score drops when two width figures clash, when thickness sits only in the title, or when the bullets state no thickness.
UK fit
20%Up to 20 points from UK review notes that name a thickness someone actually cut, and a repeated fault. A finished thin floor scores differently from a file that is large and split.
Price
10%Up to 10 points for useful width per pound on the 19 October 2026 shelf prices. The cheapest jaw is not the value case once the plank is wider than 200 mm.
Six manual guillotines sit in this table, from a 200 mm jaw at about £41.38 to a 330 mm table at about £149.99. A light shear and a heavy bench cutter are different tools. Buy the width of your plank, then a thickness UK reviewers have actually cut, then ask whether you can push the handle. A title maximum is not a clean cut every time. None of these listings is a motor, and none of them undercuts a door jamb.
A laminate cutter on the UK market is a manual guillotine. A lever and a blade cross-cut a board beside the row. There is no motor and no BS 1363 plug. You buy one for end cuts in click laminate or rigid vinyl. It does not rip a long plank, undercut a door jamb, or notch a pipe. The six tools here split into a light shear and a heavy bench table. The light tools are the Wolfcraft LC 600 at about £52.95 and the Roughneck ROU36010 at about £41.38.
WORKPRO states 16 mm and a reviewer returned it after a poor 12 mm cut. The MAIHUITE title says 17 mm and one reviewer struggled at 10 mm. Wolfcraft states 8 mm, or 11 mm only with integrated underlay. Cut a scrap of your own board.
Roughneck states 200 mm. Flooring King describes wide planks from about 190 mm to 245 mm, and a 45° cut needs more table than the face width. A jaw that is already tight will not take the wider board.
Only the Wolfcraft listing says the stop comes off for a longitudinal cut. The last row still needs a saw on the heavy tables. Support the offcut. One firm stroke beats two hesitant presses, which is how the first boards shatter.
Width is the first limit. Flooring King describes wide planks from about 190 mm to 245 mm, and a 45° cut needs more table than the face of the board. Roughneck states 200 mm, so that jaw is already tight and it will not take a board past 200 mm. WORKPRO states 340 mm. A UK reviewer laid 8 mm laminate at 315 mm wide on it. Zozen’s title says 33 cm and a bullet says 31 cm, so both figures stay in the table. The MAIHUITE and CutTool listings state 330 mm.
Wood Floor Warehouse treats the guillotine as a cut to length. The last row, narrowed along its length, needs a saw. Wolfcraft says the LC 600 stop comes off for longitudinal cuts on the serrated bars. Do not copy that onto the heavy tables. A UK review of the WORKPRO says it does not do length cuts, and a CutTool review says it cuts across the width and not along the length. Force still matters on a manual lever. WORKPRO’s item weight is 10.7 kg. The LC 600 bullet says 2 kg.
Three typical situations, each with a recommendation from this comparison.
You are cross-cutting 8 mm click laminate up to about 315 mm and you can lift a 10.7 kg table. The WORKPRO W101019A is the top pick: stated 340 mm, 4.6 from 453 reviews, wheels and a stone. The 16 mm line stays a claim after a poor 12 mm cut in one review.
You are laying 5 mm or 8 mm LVT and you want wheels and a lock without the £140 band. The Zozen table is the best value at about £91.99, with 4.4 from 234 reviews. Read both width figures: the title says 33 cm and a bullet says 31 cm.
Your planks are under 200 mm wide and at or under 11 mm, and you want straight end cuts. The Roughneck ROU36010 is about £41.38, with 200 mm and 11 mm stated together. It is the wrong tool as soon as the plank is wider than 200 mm.
The top pick is the WORKPRO W101019A at about £139.99. It has the highest score here, with 4.6 from 453 reviews, a stated 340 mm width, wheels and a 600-grit stone. A reviewer returned it after a poor 12 mm cut, so the 16 mm line stays a claim, and a lengthwise rip is not listed. The best value is the Zozen table at about £91.99, the lowest price among the wheeled tables, with finished thin LVT in the UK notes. The title says 33 cm and a bullet says 31 cm. The Roughneck is cheaper at about £41.38, but a 200 mm jaw is the wrong tool once the plank is wider than 200 mm.
WORKPRO 340 mm laminate cutter
Highest score in this set, with 4.6 from 453 reviews, a consistent 340 mm listing, wheels and a 600-grit stone.
Zozen laminate cutter with wheel
Lowest price among the wheeled tables, at about £91.99, with finished thin LVT in the UK notes.
Editorial
Peter F. is the editor for DIY & tools at productscompared.co.uk. Comparisons in this category are checked against amazon.co.uk listings, review evidence and public UK sources.
Guides on what to look for, how to use a product, and common mistakes.
Public sources used for this comparison, with the amazon.co.uk listings read on 19 October 2026.
This page contains affiliate links to amazon.co.uk (tag pcuk26-21). If you buy through them, we may earn a commission at no extra cost to you. Prices, stars and review counts are from the listings. This is not a laboratory test.
