The best angle grinder quick release nuts, compared.
Top pick: Masonvex quick release nut Best value: Jesiah quick release nut – About £6.29 for two nuts, 4.6 from 55 reviews, the lowest price per nut among scores of at least 70. Updated October 2026.
An angle grinder quick release nut replaces only the outer clamping nut, so you can change a disc by hand instead of with a two-pin spanner. A sound nut starts cleanly on an M14 spindle, clamps the discs you use, and still undoes after a hot cut. On a UK metric grinder the usual spindle is M14×2.0 and the disc bore is 22 mm. Many US-market machines use 5/8 in-11. Ignore catalogue lines such as “#0-80” or “M14 x 1.25”. Match the nut to the grinder diameter and to any brake or quick stop. Slim nuts leave more of a flap disc usable. Tall nuts often fail to close on a 1 mm cutting disc. You need free spindle thread, often at least 8 mm, or the nut bottoms out. Pin holes matter if it seizes. It does not replace the inner flange or the guard, and it is not a click-on disc system. Thread, diameter, brake and thickness are the checks in the [angle grinder quick release nut buying guide](/hub/tools/angle-grinder-quick-release-nut/sub/angle-grinder-quick-release-nut-buying-guide).
An angle grinder quick release nut replaces only the outer clamping nut, so you can change a disc by hand instead of with a two-pin spanner.
42 products checked · 61 hrs invested · +21,800 readers
Swipe for more
1-2 of 12
Personal buying guide
Question 1 of 2
How do you use the grinder?
Masonvex is about £7.99 for two nuts and shows 5.0 from only two amazon.co.uk reviews. Both comments are positive about fit and hand tightening. Two reviews are not a sample, so the five stars do not outrank nuts with hundreds of ratings. The listing still leaves thickness, brake behaviour, and pin-spanner fallback blank. You pay more than Uskerb’s about £3.99 two-pack without gaining a maker dimension or a review base. Check the M14 thread and the disc clamp before you rely on it, and do not read the star line as a test.
Pros
Cons
Best for: A buyer who has already confirmed M14×2.0 and will trial the disc before trusting the nut.
Less suitable: Anyone shopping on a 5.0 star line, or a grinder with a brake.
Specifications
Common questions
Is this nut tool-free?
The listing claims a tool-free change. Two reviews are not a sample, so the 5.0 line is not a test.
Will it fit my spindle?
Confirm M14×2.0 on the grinder. Ignore junk Amazon template lines such as “#0-80” or “M14 x 1.25”.
Can I use it on a brake grinder?
Not stated on this listing. Do not read the two five-star comments as a brake approval.
Times Mark is listed at about £5.75 with 4.8 from only 15 amazon.co.uk reviews, so the stars are early noise rather than a settled record. The title mentions a 45 mm quick release nut, the same diameter SabreCut states for the slim GRNSCB, but this page does not state a thickness. The display row counts two nuts. Comments that exist describe quick hand changes and a solid feel for the money, with a few fit complaints on particular grinders. Fifteen ratings cannot show how often a nut rusts or refuses a thin disc. Treat the pack as a low-cost trial after you have confirmed M14×2.0, not as a substitute for a nut with a published thickness.
Pros
Cons
Best for: A cheap trial on a grinder you have already measured as M14×2.0.
Less suitable: Anyone choosing on stars alone, or a cutting disc you have not checked against the nut shoulder.
Specifications
Common questions
Is this nut tool-free?
The listing claims a tool-free change. The title mentions 45 mm. Thickness is not stated.
Will it fit my spindle?
Confirm M14×2.0 on the grinder. Ignore junk Amazon template lines such as “#0-80” or “M14 x 1.25”.
Can I use it on a brake grinder?
Not stated on this listing. Fifteen reviews are not a brake test.
The Milwaukee FIXTEC 4932352473 is a single folding-lever nut at about £13.79, and the amazon.co.uk line is 4.7 from 2,229 reviews, the largest file in this set. UK trade listings describe article 4932352473 for M14 spindles on grinders up to 150 mm, at about 8 mm thick, and Milwaukee excludes it from brake and quick-stop machines. Reviewers describe disc swaps in about 20 seconds on 125 mm grinders, and say a firm hand turn is enough because the spindle’s rotation keeps the nut snug. The folding lever is the grip, and the pin holes are what you use when heat or an over-tight disc beats your fingers. The same buyers call about £13.79 a lot of money for one nut, and some ask whether it belongs on a 230 mm grinder. It does not. Milwaukee’s universal FIXTEC for 115–230 mm and rapid braking is a different article, and it is not this ASIN. Keep it for a small M14 grinder without a brake, and leave a pin spanner in the case.
Pros
Cons
Best for: A 115 mm or 125 mm M14 grinder without a brake, when you change discs often and want a pin-spanner fallback.
Less suitable: Quick-stop machines, 230 mm grinders, X-LOCK tools, and 5/8 in-11 spindles.
Specifications
Common questions
Is this nut tool-free?
Yes. You turn it by the folding lever. The pin holes are the fallback when heat or an over-tight disc beats your fingers.
Will it fit my spindle?
Confirm M14×2.0 on the grinder. Ignore junk Amazon template lines such as “#0-80” or “M14 x 1.25”.
Can I use it on a brake grinder?
No. Milwaukee excludes this small FIXTEC from quick-stop and brake machines. The 115–230 mm universal FIXTEC is a different article.
SabreCut’s GRNSCB is the slim stainless SUPERLOK, one nut at about £10.99, and SabreCut states 45 mm across and 8.9 mm thick. The amazon.co.uk line is 4.7 from 579 reviews. UK reviewers describe fast disc changes on 115 mm and 125 mm grinders and say the lower profile leaves more of a flap disc usable. SabreCut’s instruction is to hand-tighten only, and to let the spindle’s rotation finish the clamp. Complaints cluster when the nut is still too thick for a 1 mm cutting disc, or when it fouls a flap on a very small guard. This file does not state pin-spanner holes or a brake rating, so a quick-stop grinder is a guess rather than a match. It is the branded slim nut when you mostly grind or use flap discs, and a weaker choice if every job is a paper-thin cutting wheel.
Pros
Cons
Best for: 115 mm and 125 mm M14 grinders used mainly with grinding discs and flap discs.
Less suitable: Daily 1 mm cutting discs, and any grinder whose brake behaviour is not confirmed.
Specifications
Common questions
Is this nut tool-free?
SabreCut says hand-tighten only, and to let the spindle’s rotation finish the clamp. Do not finish it with pliers.
Will it fit my spindle?
Confirm M14×2.0 on the grinder. Ignore junk Amazon template lines such as “#0-80” or “M14 x 1.25”.
Can I use it on a brake grinder?
Not stated on this listing. A quick-stop grinder is a guess rather than a match.
Jesiah’s two-pack is about £6.29, about £3.15 a nut, and the amazon.co.uk line is 4.6 from 55 reviews, the largest generic sample here after Fentar. Reviews describe easy hand swaps and a price that feels reasonable next to the branded singles. The same file includes warnings about durability and about rust if the nut is stored damp. Thickness, maximum grinder size, pin holes, and brake suitability are all missing from the listing, so you cannot match it to a 1 mm disc or a quick-stop machine from the page alone. It is the best value in this set when you want two spare nuts and you will check the M14 thread on arrival. It is a poor stand-in for the Milwaukee nut if you need a stated brake exclusion and pin-spanner holes.
Pros
Cons
Best for: DIY disc changes on a known M14 grinder, when you want two spares without Milwaukee money.
Less suitable: A braking grinder, a 1 mm cutting disc you have not trial-fitted, or a daily trade nut.
Specifications
Common questions
Is this nut tool-free?
The listing claims a tool-free change. Thickness, pin holes and a brake line are not stated, so keep a pin spanner for the day your fingers are not enough.
Will it fit my spindle?
Confirm M14×2.0 on the grinder. Ignore junk Amazon template lines such as “#0-80” or “M14 x 1.25”.
Can I use it on a brake grinder?
Not stated on this listing. Do not treat silence as approval for a quick-stop machine.
SabreCut’s GRNSCA is the taller SUPERLOK-MAX, one nut at about £10.99, stated at 46 mm and 13.5 mm. The amazon.co.uk line is 4.5 from 234 reviews. UK buyers choose it when a factory nut is too shallow to clamp a deep flap or a stripper disc. That extra height is also why reviewers say it will not close on a 1 mm cutting disc and can foul a tight 115 mm guard. Hand-tighten only still applies, and this file does not state pin holes or a brake rating. Some SabreCut reviews on braking grinders describe the nut and disc loosening as the brake bites, so height is not a safety feature. Choose it for thick abrasives on an M14 spindle, and leave it if most of your discs are thin cutters.
Pros
Cons
Best for: Thick flap discs and stripper discs on an M14 grinder whose factory nut runs out of thread.
Less suitable: Thin cutting wheels, diamond cups that the tall nut will not sit inside, and unconfirmed brake grinders.
Specifications
Common questions
Is this nut tool-free?
SabreCut says hand-tighten only, and to let the spindle’s rotation finish the clamp. The extra height does not change that instruction.
Will it fit my spindle?
Confirm M14×2.0 on the grinder. Ignore junk Amazon template lines such as “#0-80” or “M14 x 1.25”.
Can I use it on a brake grinder?
Not stated as a brake rating. Some SabreCut reviews describe the nut and disc loosening as a brake bites.
Rohmerique’s two-pack is about £6.78 with 4.5 from 21 amazon.co.uk reviews. That file is too small to treat the stars as settled. The comments that exist describe straightforward fitting and a low price, and a few mention finish or how the thread feels. Thickness, grinder limit, pin holes, and brake suitability are not stated. Over-tightening is the failure that shows up across these generic packs, and 21 reviews will not tell you how this nut behaves after a hot cut. Buy it as a duplicate spare, and do not put it on a braking grinder in place of a nut the maker has excluded or approved.
Pros
Cons
Best for: A second spare nut for occasional DIY swaps on a confirmed M14 spindle.
Less suitable: A quick-stop grinder, or a primary nut you cannot afford to have seize.
Specifications
Common questions
Is this nut tool-free?
The listing claims a tool-free change. Twenty-one reviews are too few to show how it behaves after a hot cut.
Will it fit my spindle?
Confirm M14×2.0 on the grinder. Ignore junk Amazon template lines such as “#0-80” or “M14 x 1.25”.
Can I use it on a brake grinder?
Not stated on this listing. Do not fit it to a braking grinder in place of a nut the maker has excluded or approved.
Uskerb is the cheapest two-pack in the set at about £3.99, with 4.3 from 18 amazon.co.uk reviews. Buyers who like it talk about a backup nut for the money. Critics mention rough threads and a short service life. With under twenty ratings, the 4.3 is not a durability record. Nothing on the page states thickness or whether the nut survives a quick-stop brake. It suits light DIY use when you already trust another nut and want a glove-box spare you can afford to throw away. It is the wrong primary nut for daily disc changes on a trade grinder.
Pros
Cons
Best for: A glove-box spare for light DIY, when you already own a nut you trust.
Less suitable: Daily trade use, thin cutting discs, and brake grinders.
Specifications
Common questions
Is this nut tool-free?
The listing claims a tool-free change. Eighteen reviews are not a durability record.
Will it fit my spindle?
Confirm M14×2.0 on the grinder. Ignore junk Amazon template lines such as “#0-80” or “M14 x 1.25”.
Can I use it on a brake grinder?
Not stated on this listing. Nothing on the page says the nut survives a quick-stop brake.
The Fentar two-pack is about £11.99, and 4.2 from 151 amazon.co.uk reviews is one of the larger unbranded samples. Reviews mention an M14 fit on common grinders, and also quality that varies from nut to nut, rust in storage, and nuts that seize or snap under heavy use. Comments on this style of nut include a failure to clamp a 1 mm cutting disc. At this price you are close to a SabreCut single without a stated diameter or thickness. There is no pin-spanner note and no brake line. It can be a spare pair for a site grinder if you inspect the threads on arrival and keep a pin spanner ready. It is a lot to pay for a generic pack beside Jesiah’s about £6.29 two-pack.
Pros
Cons
Best for: A spare pair on a site grinder you already know is M14, if you inspect the threads first.
Less suitable: Buyers who want a published thickness, or who can spend similar money on one SabreCut nut.
Specifications
Common questions
Is this nut tool-free?
The listing claims a tool-free change. Reviews also describe nuts that seize, so a pin spanner is still worth keeping.
Will it fit my spindle?
Confirm M14×2.0 on the grinder. Ignore junk Amazon template lines such as “#0-80” or “M14 x 1.25”.
Can I use it on a brake grinder?
Not stated on this listing. There is no brake line and no pin-spanner note.
Oavie’s two-pack is about £6.39 with 4.2 from 22 amazon.co.uk reviews. Buyers who are positive mention the price and hand changes. The sample is small beside Milwaukee’s 2,229 ratings or SabreCut’s 579, and the pattern on cheap packs is soft metal, rust, or a poor grip on thin discs. This listing does not give thickness, a maximum grinder size, or a brake line. Twenty-two reviews can show that some people fitted it. They cannot show that it will still undo after a hot 1 mm cut. Use it as an occasional DIY spare, and keep a pin spanner for the day your fingers are not enough.
Pros
Cons
Best for: Occasional DIY disc swaps when you want a cheap spare and will check the thread.
Less suitable: A daily trade grinder, or a thin cutting disc you have not trial-fitted.
Specifications
Common questions
Is this nut tool-free?
The listing claims a tool-free change. Twenty-two reviews cannot show that it will still undo after a hot cut.
Will it fit my spindle?
Confirm M14×2.0 on the grinder. Ignore junk Amazon template lines such as “#0-80” or “M14 x 1.25”.
Can I use it on a brake grinder?
Not stated on this listing. There is no brake line.
Chromovax is a two-pack at about £4.79 and the weakest star line here, 3.6 from 17 amazon.co.uk reviews. Some comments still describe an easy disc change. Others report rust, snapped lugs, or a nut that will not hold a thin wheel. That mix is why the score sits at the bottom of the rated packs, even though the price looks like a bargain next to Milwaukee. Thickness and brake suitability are not stated. A throwaway spare is the only honest use, and only after you inspect the threads and try the disc you actually own. Do not make it the nut you trust for a day’s cutting.
Pros
Cons
Best for: A spare you can afford to reject after checking threads and disc clamp.
Less suitable: Any job where a snapped or loose nut would stop the work.
Specifications
Common questions
Is this nut tool-free?
The listing claims a tool-free fit. Reviews also report snapped lugs and a nut that will not hold a thin wheel.
Will it fit my spindle?
Confirm M14×2.0 on the grinder. Ignore junk Amazon template lines such as “#0-80” or “M14 x 1.25”.
Can I use it on a brake grinder?
Not stated on this listing. Thickness and brake suitability are both blank.
Veagafoo is a four-pack at about £9.29, about £2.32 a nut, and the amazon.co.uk file has no customer-review line. You are paying for quantity with no star count to set beside Milwaukee or SabreCut. Fit, thickness, and durability have to be checked on delivery, the same as any unbranded M14 nut. Four nuts can make sense for a workshop that loses clamp nuts and already knows the spindle is M14×2.0. They do not make sense as the first nut on a braking grinder, because nothing on the page says the nut is approved for a quick stop. Until reviews exist, treat the pack as unproven stock rather than a tested spare.
Pros
Cons
Best for: A workshop that already loses M14 nuts and wants several spares in one order.
Less suitable: A first nut, a brake grinder, or any buyer who wants review evidence.
Specifications
Common questions
Is this nut tool-free?
The listing claims a tool-free self-locking clamp. There is no amazon.co.uk review line in the capture to set beside that claim.
Will it fit my spindle?
Confirm M14×2.0 on the grinder. Ignore junk Amazon template lines such as “#0-80” or “M14 x 1.25”.
Can I use it on a brake grinder?
Not stated on this listing. Nothing on the page says the nut is approved for a quick stop.
Twelve amazon.co.uk listings were scored from the stored pages and the maker lines already on file. Shelf date 19 October 2026. There is no laboratory test. A quick-release nut is not scored as safer than a factory nut. Stars are the listing line. The highest score is the top pick. Best value is the lowest price per nut among nuts that score at least 70 and have at least 50 reviews. One of each. The weights below sum to 100.
Amazon evidence
50%If there is no star line, this criterion scores 12 and stops. Otherwise the star rating is scaled, review-count bands add points, and the sum is capped at 50.
Listing clarity
25%Full marks need a stated thickness, a maximum grinder size, a brake line and a pin-spanner fallback. A maker diameter and thickness score next. A tool-free claim with those fields blank scores less.
Review pattern
15%A missing review line, stars under 4.0, and a count under 25 are scored apart from files of at least 50 reviews and files of at least 200 reviews.
Value
10%Points use the price per nut and the review count. A pack at or under £4 a nut with at least 50 reviews can score the full 10. A 5.0 from two reviews does not.
Buy the spindle, the grinder diameter and the brake before you buy a star line. A quick-release nut replaces the outer clamp only. Thickness decides which discs close. A review count is a listing figure, not a laboratory panel.
An angle grinder quick release nut replaces only the outer clamping nut. You change a disc by hand instead of hunting for the two-pin spanner. UK buyers usually already own a 115 mm or 125 mm grinder and swap cutting discs with grinding or flap discs. A sound nut starts cleanly on the spindle, clamps the discs you use, and still undoes after a hot cut. It is not a click-on disc system, it does not replace the inner flange or the guard, and it is not a laboratory-tested safety upgrade.
Bosch Professional’s UK notes give M14×2.0 for EU metric grinders and 5/8 in-11 for many US-market machines. Amazon lines such as “#0-80” or “M14 x 1.25” are not the spindle specification.
SabreCut states the GRNSCA at 13.5 mm. Reviewers say that extra height often will not close on a 1 mm cutting disc or sit inside a diamond cup. A slim nut, stated around 8–9 mm, leaves more of a flap disc usable.
Article 4932352473 is stated up to 150 mm and Milwaukee excludes it from brake and quick-stop machines. The 115–230 mm universal FIXTEC is a different product and is not in this set.
The first check is the thread cut into the spindle, not the thread printed in an Amazon table. Bosch Professional’s UK notes give the EU metric spindle as M14×2.0 and the disc bore as 22 mm. Many US-market grinders use 5/8 in-11. Values such as “#0-80” and “M14 x 1.25” show up in these listings and are ignored as the spindle specification. Diameter and brake come next.
Nut height changes which discs clamp. SabreCut states the slim GRNSCB at 45 mm across and 8.9 mm thick, and the taller GRNSCA at 46 mm and 13.5 mm. Slim nuts leave more of a flap disc usable. Tall nuts help when a factory nut is too shallow for a deep flap or a stripper disc, and they are what reviewers say will not close on a 1 mm cutting disc. Most of the generic packs do not state a thickness at all. Free thread sits beside height.
Three typical situations, each with a recommendation from this comparison.
You lose the pin spanner and change a disc a few times a month on a grinder you already know is M14. The Jesiah two-pack is the best value at about £6.29, with 4.6 from 55 amazon.co.uk reviews. Thickness and a brake line are not stated, so check the thread and keep a pin spanner.
You swap cut and grind discs on one 115 mm or 125 mm M14 grinder without a brake, and you want pin holes. The Milwaukee FIXTEC 4932352473 is the top pick at about £13.79, with 4.7 from 2,229 reviews. It is stated up to 150 mm and about 8 mm thick. It is not for a quick-stop machine.
You mostly grind or use flap discs, and you want a stated thickness. The SabreCut GRNSCB is about £10.99, stated at 45 mm and 8.9 mm, with 4.7 from 579 reviews. Hand-tighten only. It is a weaker choice if every job is a 1 mm cutting disc, and the brake line is not stated.
The top pick is the Milwaukee FIXTEC 4932352473 at about £13.79, with 4.7 from 2,229 amazon.co.uk reviews, a stated limit of 150 mm, about 8 mm thickness, pin holes, and an explicit exclusion for quick-stop grinders. The best value is the Jesiah two-pack at about £6.29, about £3.15 a nut, with 4.6 from 55 reviews, if you will check the M14 thread yourself. The SabreCut GRNSCB is the slim nut with a stated 8.9 mm thickness. The taller GRNSCA is stated at 13.5 mm. None of these scores is a laboratory test, and none of these nuts is a safety upgrade over a factory nut.
Jesiah quick release nut
About £6.29 for two nuts, 4.6 from 55 reviews, the lowest price per nut among scores of at least 70.
Editorial
Peter F. is the editor for DIY & tools at productscompared.co.uk. Comparisons in this category are checked against amazon.co.uk listings, review evidence and public UK sources.
Guides on what to look for, how to use a product, and common mistakes.
Public UK sources from the research digest, used for this page in October 2026. Prices, stars and review counts are from the twelve amazon.co.uk listings captured on 19 October 2026. PUWER applies at work. It is not a certificate for a domestic disc change, and none of these nuts was laboratory tested.
This page contains affiliate links to amazon.co.uk (tag pcuk26-21). If you buy through them, we may earn a commission at no extra cost to you. Prices, stars and review counts are from the listings. This is not a laboratory test.
