Independent comparisons. We may earn from shop links. More info

Powder coating gun comparison 2026

The best Powder coating guns, compared.

Top pick: Eastwood HotCoat PCS-250 Best value: PTOOL PT-200 – Lowest shelf price in this set at about £94.92, with stated 15 kV and 25 kV and 4.3 from 57 reviews, for small metal parts if you already own a trap and an earth clamp. Updated October 2026.

Peter F.
Peter F.Editor

A powder coating gun charges dry coating powder and sprays it onto earthed metal so a dedicated oven can melt and cure the film. On amazon.co.uk these buyers are garage hobbyists coating brackets and levers that fit that oven. You tell a usable kit by a stated kilovolt range, a real earth clamp, dry air, and a 230 V supply or a step-down transformer with the earth kept. Voltage, earth, and air are in the [powder coating gun buying guide](/hub/painting-supplies/powder-coating-gun/sub/powder-coating-gun-buying-guide). If the part will not fit, a local coater is the practical route. The workpiece is conductive metal that can take the powder’s cure, often around 180–200°C at the metal.

A powder coating gun charges dry coating powder and sprays it onto earthed metal so a dedicated oven can melt and cure the film.

Eastwood HotCoat PCS-250

Best overall

Eastwood HotCoat PCS-250
9.6/10∼ £124

18 products checked · 58 hrs invested · +21,400 readers

5 of 5: Best Powder coating guns compared

Swipe for more

1-2 of 5
Best overall
Eastwood HotCoat PCS-250
Hosile powder coating system
Best value
PTOOL PT-200
MXBAOHENG PC03-5
VitalisWorks powder coating gun
9.6/10
9.6/10
9.0/10
1.0/10
1.0/10
∼ £124
∼ £118
∼ £95
∼ £169
∼ £176
4.6(320)
4.6(19)
4.3(57)
–
–
View offer
View offer
View offer
View offer
View offer

Personal buying guide

Question 1 of 2

What is still missing from your bench?

The best Powder coating guns in detail

Eastwood HotCoat PCS-250

Rank 1

Eastwood HotCoat PCS-250

∼£124

Our view

The Eastwood HotCoat PCS-250 is the dual-voltage gun with the largest review file in this set: 4.6 from 320 amazon.co.uk reviews, at about £124.00. Reviews state 15 kV and 25 kV, and the box includes a ground clamp and cable, an activation switch, and one empty clear bottle. A foot pedal is not included, and a moisture separator is not stated. The manual for item 33278 specifies 110–120 V and 5–8 psi, so this listing is not a 230 V gun with a UK plug. Reviews from Germany mention a step-down transformer to about 115 V. Frost’s UK kit with a VW23 transformer was £299, reduced from £359, and that bundle is not this £124 box. Most of the written reviews behind the 4.6 come from outside the UK.

Pros

  • Ground clamp and cable in the box
  • Reviews state 15 kV and 25 kV
  • 4.6 from 320 reviews, the largest sample in this set
  • Manual for item 33278 states 5–8 psi

Cons

  • No foot pedal; activation switch only
  • Manual is 110–120 V, not a confirmed 230 V supply
  • Moisture separator not stated
  • Written reviews are largely from outside the UK

Best for: A known dual-voltage hobby gun if you already have a proper step-down transformer and you keep the earth intact

Less suitable: A buyer who wants a foot pedal in the box, or who assumes the £124 listing includes a UK transformer

Specifications

Model
Eastwood HotCoat PCS-250
Brand
Eastwood
Price
∼£124
Customer rating
4.6/5(320)
Output voltage
Review: 15/25 kV
Ground clamp
Yes
Stated air
5–8 psi
Voltage control
Two settings
Foot switch
No
Powder containers
1 bottle
Weight
1.99 kg

Common questions

Does this listing include a foot pedal?

No. The package lists an activation switch. Reviewers say a foot pedal is not included.

What kilovolts does the listing print?

The bullets say dual voltage and do not print a number. Reviews in the file state 15 kV and 25 kV.

Does the listing state a UK mains voltage?

No. Mains voltage on the listing is not stated. The manual for item 33278 specifies 110–120 V. Reviews from Germany mention a step-down transformer to about 115 V.

Hosile powder coating system

Rank 2

Hosile powder coating system

∼£118

Our view

The Hosile system lists 20 kV and 50 kV and, at about £117.67, includes a foot pedal, a moisture separator, a grounding clip, and two powder cups. The diffuser set is a large piece, a small piece, and a medium head. Amazon shows 4.6 from 19 reviews, and the written reviews behind that line are largely from outside the UK, so it is not a British buyer sample. The listing raises maximum air pressure and does not answer it. Mains voltage for the control box is not stated either, so you cannot tell from the page whether this gun is 230 V. It first appeared on 5 November 2025, which is a short record if a control box trips or smells hot. You still supply the compressor, the powder, a dust respirator, and an oven you will not use for food.

Pros

  • 20 kV and 50 kV stated on the listing
  • Foot pedal, moisture separator, and grounding clip included
  • Two powder cups and three diffuser pieces
  • 4.6 from 19 reviews at about £117.67

Cons

  • Air supply not stated
  • Mains voltage not stated
  • The 19 reviews are largely written outside the UK
  • Short listing history from 5 November 2025

Best for: A hobby setup where you want the pedal, separator, and earth clip in one box and you can check the input voltage yourself

Less suitable: Anyone who needs a printed air pressure or a confirmed 230 V supply

Specifications

Model
Hosile powder coating system
Brand
Hosile
Price
∼£118
Customer rating
4.6/5(19)
Output voltage
20 / 50 kV
Ground clamp
Yes
Moisture separator
Yes
Voltage control
Dual voltage
Foot switch
Yes
Powder containers
2 cups
Nozzles
3 pieces
Weight
2.15 kg

Common questions

What does the Hosile listing put in the box?

A spray gun, two powder cups, a moisture separator, a control box, a grounding clip, a pedal, and three diffuser pieces.

What maximum air pressure does the listing state?

The listing asks the question and does not answer it. The air supply is not stated.

What output does the listing state?

20 kV and 50 kV. Mains voltage is not stated.

PTOOL PT-200

Rank 3

PTOOL PT-200

∼£95

Our view

Across 57 amazon.co.uk reviews rated 4.3, buyers who get on with the PTOOL PT-200 use the stated 15 kV and 25 kV settings on small metal parts. At about £94.92 it is the lowest shelf price in this set, and the box includes a clear powder bottle. The same review notes include control boxes that trip a breaker and units that fail early. The listing does not state a foot switch, a moisture separator, or a ground clamp, so those are not supplied parts you can count on. A bullet that names wood and plastic is only the listing claim; this powder process is for conductive metal that fits a dedicated curing oven. Mains voltage and the air supply are not stated, so check the input before you use a UK 13 A socket. The technical line gives a weight of 1.92 kg.

Pros

  • Stated 15 kV and 25 kV for small metal parts
  • Clear powder bottle included
  • About £94.92, the lowest price in this set
  • 4.3 from 57 amazon.co.uk reviews

Cons

  • Reviews include breaker trips and early failures
  • Foot switch, moisture separator, and ground clamp not stated
  • Wood and plastic bullet is not a cure claim
  • Mains voltage and air supply not stated

Best for: Small metal parts when the price matters and you already own a moisture trap, an earth clamp, and a dedicated curing oven

Less suitable: A buyer who needs a stated UK mains voltage, or who treats the wood and plastic line as something this gun can coat

Specifications

Model
PTOOL PT-200
Brand
PTOOL
Price
∼£95
Customer rating
4.3/5(57)
Output voltage
15 / 25 kV
Voltage control
Dual voltage
Powder containers
Clear bottle
Weight
1.92 kg

Common questions

What output voltage does the PT-200 listing state?

The listing states 15 kV and 25 kV.

Does the listing include a foot switch or a moisture separator?

Neither is stated.

Does the listing say it coats wood and plastic?

The bullets say metal, wood, plastic, and more. The title says the system is for metal. The wood and plastic line is only the listing claim.

MXBAOHENG PC03-5

Rank 4

MXBAOHENG PC03-5

∼£169

Our view

The MXBAOHENG PC03-5 lists 30–50 kV in five speeds, three nozzles, and two powder cups, at about £169.00. There is no amazon.co.uk star line, so this is a specification purchase. The stated air supply is 0.5–1.2 kg, with 1.0 kg called the recommended point, and the page does not give that figure in bar or psi. A foot switch, a moisture separator, and a ground clamp are not stated. Mains voltage is not stated either, which leaves a 230 V UK socket unchecked. The technical details give 4 kg and stainless steel. The listing dates from 12 July 2015 and this file still has no review count.

Pros

  • 30–50 kV in five speeds on the listing
  • Three nozzles and two powder cups
  • Stated air band of 0.5–1.2 kg
  • 4 kg on the technical line

Cons

  • No amazon.co.uk star line or review count
  • Foot switch, moisture separator, and ground clamp not stated
  • Air figure is in kg, not bar or psi
  • Mains voltage not stated

Best for: A buyer who wants a printed 30–50 kV range and will add earth, dry air, and a voltage check before use

Less suitable: Anyone who wants review evidence, a stated UK mains voltage, or a foot pedal in the listing

Specifications

Model
MXBAOHENG PC03-5
Brand
MXBAOHENG
Price
∼£169
Output voltage
30–50 kV
Voltage control
5-speed
Powder containers
2 cups
Nozzles
3 pieces
Weight
4 kg

Common questions

What air supply does the listing state?

0.5–1.2 kg, with 1.0 kg called most ideal. The file does not say bar or psi, so that figure is not in the comparison row beside the psi values.

Is a foot switch or a moisture separator included?

Neither is stated.

Is there an amazon.co.uk star line?

No. There is no star line and no review count, so you are buying the specification only.

VitalisWorks powder coating gun

Rank 5

VitalisWorks powder coating gun

∼£176

Our view

At about £176.20 the VitalisWorks kit is the highest price in this set, and the listing states an air range of 10–15 psi plus a foot pedal and an air-water separator. Output voltage is not stated. The title says 5 stage and does not define the stages, so you cannot line it up against the 15–50 kV corona kits on charging. A ground clamp, powder containers, and nozzles are not stated. There is no amazon.co.uk star line and no review count. Mains voltage is not stated, although a power cord is listed. The page first appeared on 19 August 2025. You would be paying the highest shelf price here for a gun whose kilovolts are missing.

Pros

  • 10–15 psi stated on the listing
  • Foot pedal included
  • Air-water separator included
  • Power cord listed in the box

Cons

  • Output voltage not stated
  • No amazon.co.uk star line
  • Ground clamp, cups, and nozzles not stated
  • About £176.20 with mains voltage still not stated

Best for: A buyer who wants 10–15 psi, a pedal, and a moisture separator, and who can accept an unstated kilovolt output

Less suitable: Anyone comparing guns on kilovolts, or who wants reviews before paying the highest price in this set

Specifications

Model
VitalisWorks powder coating gun
Brand
VitalisWorks
Price
∼£176
Moisture separator
Yes
Stated air
10–15 psi
Foot switch
Yes

Common questions

What output voltage does the listing state?

It does not. Output voltage is not stated. The title says 5 stage and does not define the stages.

What air pressure is stated?

10–15 psi.

Is there an amazon.co.uk star line?

No. There is no star line and no review count.

How we compared

Five amazon.co.uk hobby corona kits were lined up from the saved listing pages on 20 October 2026. Where a star line exists, the score is that star rating times 20. Two listings have no star line and score 0. This is not a laboratory test. None of these pages shows a BS EN 50050-2 mark or a BS 1363 plug. The top pick is the Hosile kit: it ties the highest star line at 4.6, and the listing states 20 kV and 50 kV with a foot pedal, a moisture separator, and a grounding clip. The best value is the PTOOL PT-200, the lowest shelf price in the set at about £94.92, with stated 15 kV and 25 kV and 4.3 from 57 reviews.

1

Charging stated

25%

Corona kits in this set should quote a kilovolt range, about 15–50 kV. A figure that appears only in reviews is weaker than a figure on the listing. A title that says 5 stage and does not define the stages is not a voltage. A tribo gun may quote no kilovolts. None of these five is sold as a tribo gun.

2

Earth, dry air and mains

30%

You need a clamp on bare metal, a regulator, a moisture trap, and either 220–240 V on the label or a 110–120 V gun with a step-down transformer and the earth kept. The Eastwood manual for item 33278 is 110–120 V. A listing that leaves mains voltage unstated does not pass this check.

3

Box contents

20%

A cup or bottle, a ground lead, and a water separator if you do not own one. A foot switch is convenient. It does not cure the powder. Hosile is the kit in this set that lists the pedal, the separator, and the grounding clip together.

4

Review evidence

15%

A star line with a count sits above a listing with no reviews. No star line means you are buying the specification only. The Eastwood 4.6 from 320 and the Hosile 4.6 from 19 are not treated as British buyer opinion. The written reviews in those files are largely from outside the UK.

5

Shelf price

10%

Prices are the amazon.co.uk shelf figures in this set, about £94.92 to £176.20. The gun is the small invoice. The oven, compressor, powder, and a dust respirator sit outside it. The lowest price with a stated kilovolt pair and a star line is the best value, with the failure notes kept.

Independent review
Last updated: October 2026
8 sources checked

Powder coating gun buying guide

Buy the gun only after the curing oven, the dry air, and the earth are settled. Five amazon.co.uk hobby corona kits were scored from the saved pages on 20 October 2026. Shelf prices run from about £94.92 to about £176.20. The top pick and the best value are named from the star lines and from what each listing actually states. Neither result is a laboratory test, and neither is a claim about every powder gun in Britain.

What is a powder coating gun?

A powder coating gun charges dry coating powder and sprays it onto earthed metal so a dedicated oven can melt and cure the film. The buyers in this comparison are garage hobbyists coating brackets, levers, and other pieces that fit that oven. The oven is not a food cooker. If the part will not fit, a local coater is the practical route. The workpiece is conductive metal that can take the powder’s cure, often around 180–200°C at the metal.

Best for

  • A garage hobbyist coating oven-sized metal brackets
  • A restorer who already owns a step-down transformer

Not ideal for

  • Parts that will not fit the curing oven
  • Paid work, or a part that is still on the vehicle

Mistakes to avoid

  1. 1

    Buying the gun before the oven and the dry air

    The part has to fit a curing oven you will never use for food. You also need a regulator and a moisture trap. The gun is the small invoice beside the oven, the compressor, the powder, and a dust respirator.

  2. 2

    Putting 110 V straight onto 230 V

    The Eastwood manual for item 33278 is 110–120 V. Use a proper step-down transformer and keep the earth. Do not assume the £124 listing is the Frost UK kit, which was £299 reduced from £359.

  3. 3

    Trusting a wood-and-plastic bullet

    The workpiece is conductive metal that can take the cure, often around 180–200°C at the metal. The PT-200 bullets name wood and plastic. That line is only the listing claim. The cure process does not support it.

What to weigh up

Charging, earth and mains

High

The part has to fit a curing oven you will never use for food. If it will not, a local coater is the right call. The workpiece is conductive metal that can take the powder’s cure, often around 180–200°C at the metal. Charging has to be stated. Corona kits here quote about 15–50 kV. PTOOL states 15 kV and 25 kV. Hosile states 20 kV and 50 kV. MXBAOHENG states 30–50 kV in five steps. Eastwood reviews state 15 kV and 25 kV. The listing itself says dual voltage and does not print a number.

Box contents, reviews and the rest of the bill

High

The box should include a cup or a bottle, a ground lead, and a water separator if you do not already own one. A foot switch is convenient. It does not cure the film. Hosile lists a pedal, a moisture separator, a grounding clip, and two cups. Eastwood lists a ground clamp and an activation switch, not a foot pedal. PTOOL lists a clear bottle, and does not state a clamp or a separator. VitalisWorks lists a pedal and an air-water separator, and does not state kilovolts.

Which option suits you?

Three typical situations, each with a recommendation from this comparison.

First hobby kit

You have a compressor and a spare oven, and you still need the earth clip and a moisture separator in the box. The Hosile system at about £117.67 states 20 kV and 50 kV and lists a foot pedal, a moisture separator, and a grounding clip. Mains voltage is not stated, and the 19 reviews are largely written outside the UK. Expect to waste powder on scrap.

Transformer on the bench

You already own a step-down transformer and you will keep the earth intact. The Eastwood HotCoat PCS-250 at about £124.00 is the dual-voltage gun whose manual for item 33278 specifies 110–120 V and 5–8 psi. The £124 listing is not the Frost UK kit with a VW23 transformer. A foot pedal is not included.

Lowest shelf price

You want the lowest price in this set and you already own a moisture trap, an earth clamp, and a dedicated curing oven. The PTOOL PT-200 is about £94.92, with stated 15 kV and 25 kV and 4.3 from 57 reviews. Reviews include breaker trips and early failures. The listing does not state a foot switch, a moisture separator, or a ground clamp.

Our recommendation

View offer

Common questions about Powder coating guns

Which powder coating gun is the top pick in 2026?
The top pick in this set of five amazon.co.uk listings is the Hosile powder coating system at about £117.67. It ties the highest star line at 4.6, from 19 reviews, and the listing states 20 kV and 50 kV. The box includes a foot pedal, a moisture separator, and a grounding clip. Those reviews are largely written outside the UK, and the mains voltage is not stated. This is not a laboratory test.
Which powder coating gun is the best value?
The best value is the PTOOL PT-200 at about £94.92, the lowest shelf price in this set. The listing states 15 kV and 25 kV, a clear powder bottle is included, and amazon.co.uk shows 4.3 from 57 reviews. The same notes include breaker trips and early failures. A foot switch, a moisture separator, and a ground clamp are not stated, so count on them only if you already own them.
How much does a powder coating gun cost on amazon.co.uk?
Prices here are the amazon.co.uk figures saved on 20 October 2026, not a live check. The five kits run from about £94.92 to about £176.20. PTOOL is about £94.92, Hosile about £117.67, and Eastwood about £124.00. MXBAOHENG is about £169.00 and VitalisWorks about £176.20, with no star line. Frost’s UK Eastwood kit with a transformer was £299, reduced from £359, and that is not the £124 listing.
Will these powder coating guns plug into a UK 13 A socket?
Not on the evidence in these files. None of the five listings shows a BS 1363 plug. The Eastwood manual for item 33278 specifies 110–120 V, so the £124 listing is not a confirmed 230 V gun. Hosile, PTOOL, MXBAOHENG, and VitalisWorks do not state a mains voltage. Use 220–240 V only when the label says so, or a 110–120 V gun with a proper transformer and the earth kept.
Can a powder coating gun coat wood or plastic?
No. The workpiece is conductive metal that can take the powder’s cure, often around 180–200°C at the metal, in an oven you will not use for food. The PTOOL bullets name metal, wood, plastic, and more, while the title says the system is for metal. That wood and plastic line is only the listing claim. Ignore it. If the part will not fit the curing oven, use a local coater instead of buying a larger gun.
Is a powder coating gun the same as a paint spray gun?
No. A powder coating gun charges dry coating powder and sprays it onto earthed metal so a dedicated oven can melt and cure the film. A liquid paint spray gun atomises paint. It does not need that powder cure, and it is the wrong tool if you are coating brackets for an oven. The paint spray gun comparison is for liquid paint. Tribo and corona are both powder guns. Every listing in this set is sold as a corona kit.
When should you use a commercial powder coater instead?
Use a commercial coater when the part will not fit the curing oven, when the work is paid, or when the part is still on the vehicle. Stop if the control box trips or smells hot. Do not cure coated parts in a food oven afterwards, and do not bypass the earth. Dust, shock, and fire apply at home even when employer duties do not.
Is powder coating dust a hazard at home?
HSE treats coating powder as breathable dust. For employers the cited limits are 10 mg/m³ inhalable and 4 mg/m³ respirable over 8 hours. TGIC powders are tighter, at 0.1 mg/m³. Those duties apply when the spraying is work. Dust, shock, and fire still apply at home. Do not treat these guns as safe indoors. None of the five listings shows a BS EN 50050-2 mark.

Our verdict

The top pick in this set is the Hosile powder coating system at about £117.67. It ties the highest star line at 4.6 from 19 reviews, the listing states 20 kV and 50 kV, and the box includes a foot pedal, a moisture separator, and a grounding clip. Those reviews are largely written outside the UK, and the mains voltage is not stated. The best value is the PTOOL PT-200 at about £94.92, with stated 15 kV and 25 kV and 4.3 from 57 reviews, if you already own a moisture trap and an earth clamp. Reviews include breaker trips and early failures. The Eastwood HotCoat PCS-250 at about £124.00 has the largest review file, 4.6 from 320, and the manual for item 33278 is 110–120 V. None of these scores is a laboratory test.

Best overall
Eastwood HotCoat PCS-250

Eastwood HotCoat PCS-250

View offer
Best value
PTOOL PT-200

PTOOL PT-200

Lowest shelf price in this set at about £94.92, with stated 15 kV and 25 kV and 4.3 from 57 reviews, for small metal parts if you already own a trap and an earth clamp.

View offer

Editorial

Peter F. - Editor
Editor
Painting suppliesPowder coating gunsDIY & tools

Peter F. is the editor for DIY & tools at productscompared.co.uk. Comparisons in this category are checked against amazon.co.uk listings, review evidence and public UK sources.

Updated: October 2026
8 sources checked

Guides to Powder coating guns

Guides on what to look for, how to use a product, and common mistakes.

Related comparisons

Sources

Public UK sources used for this comparison. Listing prices, stars and review counts are the amazon.co.uk figures saved for this set on 20 October 2026.

  1. HSE, Introduction to powder coating (retrieved 20 October 2026)
  2. HSE, Reducing risks from coating powders for employers (retrieved 20 October 2026)
  3. HSE, Specialist powders (retrieved 20 October 2026)
  4. BCF Code of Safe Practice HS 004 (August 2015) (retrieved 20 October 2026)
  5. BSI, BS EN 50050-2:2013, hand-held spraying equipment for ignitable coating powder (retrieved 20 October 2026)
  6. Electrostatic Magic, step-by-step guides (retrieved 20 October 2026)
  7. Eastwood PCS-250 instructions, item 33278 (retrieved 20 October 2026)
  8. Frost, Eastwood PCS-250 dual voltage powder coating gun VW23 kit (retrieved 20 October 2026)

This page contains affiliate links to amazon.co.uk. If you buy through them, we may earn a commission at no extra cost to you. Prices, stars and review counts are the UK listing lines in this comparison. We did not run a lab test.