The best drain cleaning hoses, compared.
Top pick: StoneBanks 15 m black Best value: OHAYORI 15 m – 15 m at about £24.99 with a 180 bar hose rating, three named adapters, and 4.4 from 424 reviews on its own listing. Updated October 2026.
A drain cleaning hose, in this UK set, is a narrow high-pressure hose and nozzle that fits a domestic pressure-washer gun and pulls itself along a pipe with rear-facing jets. Quality is a fitting that matches the gun, a hose that passes a bend, and a nozzle inside the pipe before you pull the trigger. The hose rating is not the pressure the washer produces. Length, nozzle, and adapter are set out in the [drain cleaning hose buying guide](/hub/tools/drain-cleaning-hose/sub/drain-cleaning-hose-buying-guide). The two black hoses share one review pool.
A drain cleaning hose, in this UK set, is a narrow high-pressure hose and nozzle that fits a domestic pressure-washer gun and pulls itself along a pipe with rear-facing jets.
38 products checked · 61 hrs invested · +18,400 readers
Swipe for more
1-2 of 11
Personal buying guide
Question 1 of 2
Which gun are you fitting?
The black 15 m StoneBanks hose uses one four-hole head with a forward jet and three rear jets. Its £25.51 price and 180 bar listing place it in the middle of this set, while the stated temperature range reaches 60 °C. The apparent 4.4 stars from 2,114 reviews need caution because this hose shares that review text and count with the 10 m variant. Compatibility is also unresolved: the title includes K4, a bullet excludes K4 and one shared review says a K4 fitted. There is no additional adapter choice or rotating nozzle on the listing. Buy only after confirming the exact gun connection, rather than treating either the review count or the K2–K7 title as proof.
Pros
Cons
Best for: A 15 m Kärcher-type run after the seller or a dry fit confirms the exact gun connection.
Less suitable: K4 owners seeking guaranteed compatibility or buyers comparing products by review count alone.
Specifications
Common questions
Does the listing say it fits a Kärcher K4?
The title includes K4. The bullet says it is not compatible with K4 and names K2, K3, K5, K6, and K7. A review in the shared pool says a K4 fitted.
Are the 2,114 reviews only for the 15 m hose?
No. The same review text and the same 4.4 from 2,114 line are on the 10 m ASIN B07ZB26WN1. The two counts are one pool.
What temperature does the bullet state?
From −34 °C to 60 °C. That is the listing text, not a lab result.
This StoneBanks variant shortens the hose to 10 m and lowers the saved price to £21.25. It has one head with a forward jet and three rear jets, which can drive the hose and work on a local blockage without the bulk of a longer coil. The displayed 4.4 from 2,114 reviews is not an independent pool, because the same count and review text appear on the 15 m ASIN. Its compatibility copy also contradicts itself: the title includes K4 while a bullet says the hose is not compatible with K4. The 740 g listed weight is convenient, but no rotating nozzle or multi-brand adapter set is shown. It suits a short, confirmed connection; it should not be selected solely as the cheapest apparent high-review option.
Pros
Cons
Best for: A nearby private drain where 10 m is enough and the adapter has been confirmed against the gun.
Less suitable: Longer runs, uncertain K4 connections or shoppers relying on the 2,114 count as independent evidence.
Specifications
Common questions
How is this different from the 15 m StoneBanks hose?
This listing is 10 m at £21.25, weight 740 g, outside diameter 12.7 mm on the spec line. The 15 m listing is £25.51 and 1.13 kg. Image, stars, and review text match.
Does the bullet include a K4?
No. It says the hose is not compatible with the K4. The title still lists K4 in the K2–K7 series, and a shared review says a K4 fitted.
Is assembly tool-free?
The listing does not say. A shared review says to fit the reinforced end to the machine and the nozzle to the other end.
Nilfisk's part 6410766 is a 15 m drain and tube cleaner built around the brand's own bayonet fitting and one self-propelling head. That makes compatibility clearer for a Nilfisk owner than a multi-adapter marketplace kit, but it is not presented as a Kärcher accessory. The 4.4-star line is backed by 1,810 reviews, the largest independent pool in this set. Reviewers describe clearing leaf-blocked drains and a 110 mm underground kitchen-waste run, while also noting that the pressure washer itself limits the result. At £39.12 it costs more than most of the multi-brand options and does not include a separate rotating nozzle. It is the straightforward pick for the supported Nilfisk bayonet, not the flexible choice for households that may change washer brands.
Pros
Cons
Best for: Nilfisk pressure-washer owners who want a brand-specific 15 m drain cleaner.
Less suitable: Kärcher owners or buyers who want several adapters and a choice of nozzle patterns.
Specifications
Common questions
Will this fit a Kärcher?
The listing says it fits Nilfisk high-pressure washers with a bayonet coupling. It does not list a Kärcher adapter.
What pipe did reviewers clear?
Leaf-blocked drains and a 110 mm underground kitchen waste are described. Reviewers also say the washer’s own pressure limits the result.
Does it include two nozzles?
No. The included-components line is one drain and tube cleaner with a self-propelling head.
The STYDDI gives you a 15 m hose, two nozzle patterns and adapters named for Kärcher K-series and Lavor machines. Its 180 bar listing is a hose rating rather than a promise of cleaning pressure, but it is a sensible match for a typical domestic run. The 4.4-star line comes from 1,140 reviews on this listing, a substantially broader pool than most kits here. Reviews also extend the compatibility evidence to a Hawksmoor, while Nilfisk required one buyer to alter a fitting and should not be treated as supported. The button nozzle combines a forward jet with three rear jets, while the rotating nozzle is the alternative for working around the pipe wall. This is our top pick for a compatible washer and an ordinary 15 m outside run, not for a WC trap or an unlisted bayonet.
Pros
Cons
Best for: Kärcher K-series or Lavor owners clearing a reachable outside drain over a run of up to 15 m.
Less suitable: Nilfisk owners, toilet traps and buyers who need proof of fit for an unlisted pressure washer.
Specifications
Common questions
Which pressure washers does the listing name?
The title and bullets name Kärcher K2–K7 and Lavor, with one adapter for each. A review reports a Hawksmoor fit. A Nilfisk fit is not on the listing; one reviewer cut the brass fitting to force it.
What nozzles are in the kit?
A button nozzle with one forward jet and three rear jets at 33 degrees, orifice stated as 4.0, and a rotating nozzle with orifice stated as 4.5.
Does the listing say it fits a standard WC?
No. Reviews talk about drains and about a sink only after the trap was removed. There is no WC-pan measurement.
OHAYORI provides a 15 m hose, rear-jet and rotating nozzles, and adapters named for Kärcher, Lavor and post-2013 Bosch AQT machines. At £24.99 it undercuts the STYDDI while retaining the same listed 180 bar hose rating. The 4.4-star score comes from 424 reviews on this listing, with reports covering Kärcher K4, K5, K6 and K7 as well as Parkside and Pro Splash through an adapter. Repeated complaints describe kinking, coil memory and a hose that feels thin when pushed, so careful uncoiling matters. The listing's material fields also disagree, which makes the construction description less dependable than the fit evidence. It is our best-value choice around £25 for a compatible 15 m run, provided you accept the handling complaints.
Pros
Cons
Best for: Value-conscious owners of a named compatible washer who need a 15 m outside-drain hose.
Less suitable: Buyers who prioritise easy uncoiling, a stiff feed or completely consistent construction details.
Specifications
Common questions
Which Bosch washers does the bullet allow?
Bosch new type, manufactured after 2013, plus a Bosch adapter in the box. A review also reports a neighbour’s Bosch.
What do reviews say about the hose itself?
Rainwater gullies were cleared on Kärcher guns. Repeated complaints are kinking, coil memory, and a hose that feels thin to push.
Is it stated for a shower?
One review cleared a drain from a shower room. The listing does not give a shower-tray or trap fit.
The orange Stone Banks kit combines a 15 m hose with button and rotating nozzles plus five adapters. Reviews broaden the practical fit beyond Kärcher to Wilks R545, Bosch and Titan machines, although the Bosch attachment was tight for one buyer. Its 4.4-star line is based on 123 reviews belonging to this orange listing, rather than the shared pool used by the black StoneBanks variants. The supplied parts are versatile, but reviewers also mention a first-use ferrule leak, a nozzle that would not unscrew and no instructions for the attachments. At 1.45 kg it is heavier than several alternatives in the set. Choose it for adapter choice, provided you are comfortable checking every connection before pressurising the hose.
Pros
Cons
Best for: Owners who need broad adapter choice for a measured 15 m run and will dry-fit the connections first.
Less suitable: Buyers wanting a light kit, detailed instructions or a connector with no reported first-use leak.
Specifications
Common questions
Will it fit only Kärcher?
The title says Kärcher K2–K7. Reviews also report a Wilks R545, a tight Bosch fitting, and a Titan. There is no Nilfisk claim.
What failed in reviews?
One buyer had a leak at the ferrule on first use. Others mention a tight Bosch attachment, a jet nozzle that would not unscrew, and no instructions for eight attachments.
Does it name a toilet?
The wide-use bullet includes toilets. It does not give a WC-pan size or say the hose passes a standard trap.
RUHUHUR supplies 20 m of hose for £24.99, making it relevant when a measured run exceeds the usual 10 or 15 m. The listing names Kärcher K2–K7 and Bosch AQT adapters, a button nozzle and a swivel nozzle, though its title also refers to three nozzles. Its 5800 psi or 400 bar figure is a hose rating and should not be read as the washer's cleaning output. The 4.3-star line comes from 29 reviews, and the negative reports include coiling inside a drain, a blocked nozzle and failure to work on one buyer's Kärcher K2. One reviewer also says a hot jet wash blew the end off, so cold water is the prudent choice unless the product instructions clearly state otherwise. The extra reach is useful, but at 1.84 kg this is not the set's lightest or best-supported hose.
Pros
Cons
Best for: A measured run longer than 15 m where the supplied adapter can be confirmed before use.
Less suitable: Hot-water use, short drains where surplus hose may coil, or buyers needing proven K2 compatibility.
Specifications
Common questions
What pressure does the title state?
5800 psi and 400 bar. That is the listing’s hose rating. The page does not state the pressure of any washer.
What went wrong in UK reviews?
The hose coiled in the drain, a nozzle blocked, a hot jet wash blew the end off for one buyer, and one buyer said it did not work on a Kärcher K2.
Is it for a shower?
Shower fit is not stated. Reviews mention an upstairs toilet and a kitchen sink.
HuaCommerce is the long-reach option here, with a listed 30 m hose, button and rotating nozzles, and adapters for Kärcher K2–K7, Lavor and Bosch. One reviewer used the full length from a chamber on a Kärcher K7, while another worked under a house from a kitchen drain. The printed 400 bar or 5800 psi is the hose rating, not the output available from a domestic washer. Its 4.3-star line comes from only 16 reviews, and one buyer says the hose retained its coil rather than behaving as a non-kink design. A further report says roots still required professional jetting, which is an important limit at this length. At £38.94, buy it for a measured long run, not because thirty metres or the pressure ceiling automatically means stronger cleaning.
Pros
Cons
Best for: A measured private drain run beyond 20 m where one of the named adapters fits the washer.
Less suitable: Short gullies, root intrusion or buyers who expect the hose rating to increase washer output.
Specifications
Common questions
When did a reviewer use the full length?
One buyer on a Kärcher K7 fed the hose from an empty chamber into a blocked shared run and worked it back and forth. Another used it on a kitchen drain under the house. A third said roots still needed a professional jet.
What pressure is printed?
The title says 5800 psi and 400 bar. The spec field says maximum pressure 400 bar. Neither figure is the output of the washer.
Is it non-kink?
The listing does not say non-kink. One review says it is not non-kink and would not uncoil easily.
This DANCINGBOAR kit keeps the hose to 10 m and includes fixed and rotating nozzles with three adapters. Reviews name Kärcher, Bosch AQT and Lavor compatibility, with one buyer also reporting a Ferrex fit. At £20.99 it is one of the cheaper options, although the 4.2-star score rests on only 37 reviews and the saved UK pool is smaller again. A listing claim that the adapter retains its O-ring is useful, but one UK reviewer still reported side leaks and described the hose as suitable for one job. The shorter length can be easier to manage when the gully or chamber is close to the washer. It is a budget option for a measured short run, rather than a reassuring choice for repeated or distant work.
Pros
Cons
Best for: A nearby gully or waste run where 10 m is enough and the supplied adapter matches your gun.
Less suitable: Long drains, frequent use or buyers who want a large review history behind the connector.
Specifications
Common questions
How long is the hose?
The title and the main bullet say 10 m. The item-length attribute says 1000 centimetres, which is the same length.
Does the listing claim a leak-proof adapter?
Yes. The bullet says the adapter holds the O-ring. One UK review still reports leaks at the side and calls it a one-job hose.
Is shower use stated?
No. A review mentions a kitchen sink waste. Shower fit is not on the listing.
This DANCINGBOAR variant centres on a short 2.73 cm probe intended to negotiate curved, narrow pipework. It names adapters for Kärcher K2–K7, Bosch AQT and Lavor, and reviewers mention both Bosch and Kärcher use. The listing title and item-length field say 15 m, but another dimensions field and one review say 10 m, so you should confirm the supplied length before buying. Its maximum 5800 psi claim is the hose rating, while the same listing describes 3000–4000 psi as a normal working range. The 4.2-star line is based on 19 reviews, too small a pool to remove the uncertainty created by the conflicting specifications. The mini probe is the reason to shortlist it; clear length documentation is not.
Pros
Cons
Best for: A curved reachable run where a short probe matters more than absolute hose length.
Less suitable: Anyone who must know the exact reach before ordering or wants a large body of review evidence.
Specifications
Common questions
Is the hose 15 m or 10 m?
The title and the item-length attribute say 15 m. The dimensions attribute says 10 m, and one review describes a 10 m hose.
What is the mini probe for?
The bullet says a 2.73 cm probe, shorter than an ordinary connector, so the head can pass curved narrow pipes.
Does it state a standard WC fit?
Toilet is named as a place you might use it. There is no measurement for a standard WC pan.
The Aimisite listing offers a low £19.98 entry point and names adapters for Kärcher K2–K7 and Bosch AQT. Its title says 15 m, but the product data also gives an item length of 23.5 cm and dimensions beginning at 3 m, so the saved specification is internally inconsistent. The 5800 psi figure is the stated hose ceiling, not the pressure your washer will deliver at the nozzle. Only seven reviews support the 4.1-star line, with one UK review reporting successful use on a Kärcher K2. A rotating turbo nozzle is named, though the second jet pattern is not fully documented. The price is attractive, but the conflicting dimensions make this a purchase to confirm with the seller before ordering.
Pros
Cons
Best for: Price-led buyers who can verify the actual hose length and need one of the explicitly named adapters.
Less suitable: Anyone who needs dependable dimensions, broad review evidence or a fully documented nozzle set.
Specifications
Common questions
Which machines does the title name?
Kärcher K2 to K7 and Bosch AQT. The only UK review saved with the listing says it was used on a Kärcher K2 to clear a blocked drain.
Why do the length fields disagree?
The title says 15 m or 50 ft. The item-length attribute says 23.5 cm and the dimensions line is 3 m by 0.04 m. The included-components line says a suction hose kit.
Is tool-free assembly stated?
No. The listing does not say the kit assembles without tools.
Shelf prices, stars, and review counts are the amazon.co.uk figures stored for these eleven listings on 16 October 2026. They are not a live reload. The score on each card is that stored 0–100 figure, which is the star line times 20, kept in the same order as the listing conflicts and the shared StoneBanks review pool. It is not a laboratory test. The top pick and the best value are the two awards already stored for this set, each tied to a job.
Gun fit
30%The adapter has to match the gun. Kärcher K2–K7 kits use a Kärcher bayonet. Nilfisk needs Nilfisk bayonet part 6410766. Bosch AQT and Lavor need the adapter the kit includes. Parkside, Hawksmoor, Wilks, and Titan count only where a review on that listing says so.
Pipe and nozzle
25%Kärcher’s PC 7.5 / PC 15 manual wants a pipe at least 40 mm across, a bend radius of at least 70 mm, and a bend no tighter than 90 degrees. A button nozzle is the blockage head. A rotating nozzle washes the wall. The nozzle is inside the pipe before the trigger.
Length against the run
20%10 m and 15 m cover most gullies described in these reviews. 20 m and 30 m are for a measured longer run. Extra hose in a short pipe is a coil that kinks.
Hose rating
15%180 bar, about 2610 psi on the StoneBanks bullets, is the sober figure on STYDDI, OHAYORI, and both classic StoneBanks hoses. Titles at 2600 psi, 5800 psi, or 400 bar are catalogue ceilings, not the pressure the washer produces.
Review independence
10%Stars and review counts are the amazon.co.uk lines on each listing. The StoneBanks 10 m and 15 m black hoses share one 4.4 from 2,114 pool. Those counts are not added together.
Start with the gun, then the pipe, then the length. A star rating does not tell you those three. The eleven listings below are amazon.co.uk pages saved on 16 October 2026, with the prices and review counts stored for this comparison. A higher psi figure on the title is a hose ceiling. It is not the pressure your washer produces, and it is not a laboratory result.
A drain cleaning hose, as UK shoppers meet it here, is a narrow high-pressure hose and nozzle that fits a domestic pressure-washer gun and pulls itself along a pipe with rear-facing jets. You choose one when a gully, a downpipe, or a reachable 110 mm waste keeps blocking and you already own a Kärcher, Nilfisk, Bosch, or similar washer.
5800 psi, 2600 psi, and 400 bar on these titles are catalogue ceilings for the hose. 180 bar is the sober printed figure on STYDDI, OHAYORI, and both classic StoneBanks hoses. The washer’s own output is a different number. A higher ceiling does not make a domestic machine cut roots or clear a public sewer.
The black StoneBanks 10 m and 15 m share one 4.4 from 2,114 review pool. The orange Stone Banks 15 m has its own 123 reviews. Treat the shared line as one pool. The same two black listings also conflict on K4: the title includes it, a bullet excludes it, and a shared review says a K4 fitted.
The nozzle goes inside the pipe before you pull the trigger. A 32 mm basin waste is under the 40 mm minimum in the Kärcher PC manual, and a long stiff ferrule stalls in a trap. Stay out of the chamber. Use an RCD, and stay out of the path of the jet, because high-pressure water can inject through skin.
The adapter has to match the gun you already own. Kärcher K2–K7 kits in this set use a Kärcher bayonet adapter. Nilfisk needs the Nilfisk bayonet, part 6410766, ASIN B0001P0BPI. Bosch AQT and Lavor need the adapter the kit actually includes. Parkside, Hawksmoor, Wilks, and Titan count only where a review on that listing says so. A bullet that says K2–K7 is not, by itself, a K4 pass. The black StoneBanks title includes K4 and a bullet excludes it.
Match the length to a run you have measured. 10 m and 15 m cover most gullies in these reviews. The RUHUHUR at 20 m and the HuaCommerce at 30 m are for a longer measured run. Spare hose in a short pipe coils and kinks. A button nozzle, one forward jet and three rear jets, is the blockage head. A rotating nozzle washes the wall. Put the nozzle inside the pipe before the trigger. 180 bar is the sober hose figure on the listings that print it.
Three typical situations, each with a recommendation from this comparison.
You already own a Kärcher K-series or a Lavor washer, and the blockage is a reachable outside run of about 15 m. The STYDDI 15 m is the top pick at about £28.87, with 4.4 from 1,140 reviews on its own listing and a 180 bar hose rating. Dry-fit the adapter before you pull the trigger.
You own a Nilfisk high-pressure washer and you need the bayonet the listing names, part 6410766. The Nilfisk 15 m is about £39.12, with 4.4 from 1,810 reviews. It is not sold here as a Kärcher kit, and it does not include a separate rotating nozzle.
You want about 15 m for a named compatible washer and you would rather pay about £24.99 than about £28.87. The OHAYORI is the best value, with 4.4 from 424 reviews on its own listing and the same 180 bar hose rating. Reviews also describe kinking and coil memory.
The top pick is the STYDDI 15 m at about £28.87 for a compatible washer and a reachable outside run up to 15 m. The listing names Kärcher and Lavor adapters, a button nozzle and a rotating nozzle, and a 180 bar hose rating, with 4.4 from 1,140 reviews on that listing. The best value is the OHAYORI 15 m at about £24.99, with the same 180 bar rating, adapters named for Kärcher, Lavor, and Bosch AQT, and 4.4 from 424 reviews on its own listing. Reviews on that hose also describe kinking. Nilfisk owners have a separate bayonet, part 6410766, at about £39.12. The two black StoneBanks hoses share one review pool, and their K4 lines conflict. A domestic kit does not replace a water company or a drainage firm on a shared, rooted, or off-boundary run.
OHAYORI 15 m
15 m at about £24.99 with a 180 bar hose rating, three named adapters, and 4.4 from 424 reviews on its own listing.
Editorial
Peter F. is the editor for DIY & tools at productscompared.co.uk. Comparisons in this category are checked against amazon.co.uk listings, review evidence and public UK sources.
Guides on what to look for, how to use a product, and common mistakes.
Public UK sources for private drains in England and Wales, drain diameter, and water-jetting precautions. Listings are the amazon.co.uk captures for these eleven ASINs, saved on 16 October 2026, not a live reload. Prices on amazon.co.uk move. Wickes and Nilfisk shop prices cited above are not Amazon shelf prices.
This page contains affiliate links to amazon.co.uk. If you buy through them, we may earn a commission at no extra cost to you. Prices, stars, and review counts come from those listings. We did not run a laboratory test. The scores rank a listing inside this set only.
