Best router table
Updated: 21 October 2026
You already own a handheld router, and the five tables on amazon.co.uk do not sort themselves by the socket on your garage wall. The best router table here means the best fit for a stated workshop among this capture, not a lab crown for every table sold in Britain. None includes a router. Peter F. read the listings on 19 October 2026. There was no lab test. A qualifying purchase can earn a commission at no extra cost to you. Live prices stay on the [router table comparison](/hub/routers/router-table).
You already own a handheld router, and the five tables on amazon.co.uk do not sort themselves by the socket on your garage wall.
You already own a handheld router, and the five tables on amazon.co.uk do not sort themselves by the socket on your garage wall. The best router table here means the best fit for a stated workshop among this capture, not a lab crown for every table sold in Britain. None includes a router. Peter F. read the listings on 19 October 2026. There was no lab test. A qualifying purchase can earn a commission at no extra cost to you. Live prices stay on the router table comparison.
Our top picks
| Badge | Product | Voltage | UK review sample | Format | Note | Price | Offer |
|---|---|---|---|---|---|---|---|
| Best overall |  Trend Trend CRT/MK3 | 240 V | 4.5 from 293 | Benchtop, 13.6 kg | 9.0 | about £258.55 | View offer |
| Best value |  Charnwood Charnwood W012 | 240 V | 4.4 from 182 | Bench, 8 kg | 8.0 | about £88.50 | View offer |
 Trend Trend WRT | 240 V | 4.4 from 102 | Free standing, 27.5 kg | 8.6 | about £349.44 | View offer |
On this page
How we judge the best router table
On 19 October 2026 the rows were the Charnwood W012 at £88.50, the BOXURN BX-RT150 at £149.46, the Trend CRT/MK3 at £258.55, the SKIL SRT1039 at £269.32, and the Trend WRT at £349.44. Amazon stars sort a list. They are not a measurement of a flat top or a square fence. In this capture the CRT/MK3 shows 4.5 from 293 reviews, the W012 4.4 from 182, the WRT 4.4 from 102, the SRT1039 4.5 from 485, and the BX-RT150 3.8 from 18. Trend and Charnwood review text reads as United Kingdom opinion. SKIL and BOXURN samples do not, so those averages do not describe a British bench.
UK mains are nominally 230 V with a BS 1363 plug. Trend and Charnwood state 240 V. SKIL states 120 V. Electrical Safety First says a travel adaptor does not change voltage, and a 110 V site transformer is not a documented match for this listing. Fence, plate, hose port, and a no-volt release in the box are the other filters. The generic order is the router table buying guide.
Top pick for most 240 V workshops
The Trend CRT/MK3 is the top pick when you already run a 1/2 inch Trend or DeWalt and you want a 240 V bench with a no-volt release at the edge. Trend's page gives a top of 610 × 405 × 26 mm, a height of 410 mm, and 13.6 kg. Ignore the amazon line of 1 kg. The box includes a 68 mm fence, seven insert rings, a mitre fence, finger boards, a lead-on pin, a push stick, and a 57 mm outlet. UK reviews cite a DeWalt DWE625. Match your own base, because some buyers drilled other routers to fit.
At £258.55 it is about £170 above the W012 and about £90 below the WRT. The difference is the switch in the box, the larger top, and 293 UK-facing reviews. It is a weak match for occasional 1/4 inch work, or for a bench that cannot take 13.6 kg. The port still needs an extractor, and it is not a workplace dust certificate. Jobs that should stay in your hands are on router table vs handheld.
Best value on a small bench
The Charnwood W012 is the best value row, at £88.50 with 4.4 from 182 reviews that read as UK experience. It is a hobby bench on melamine-faced MDF, about 430 × 400 mm and about 8 kg, for a 1/4 inch router and cutters around 35 mm. Charnwood states a face plate near 190 mm and about 260 mm under the top. The plate is not pre-drilled. Clamps and a featherboard are included, the outlet is 40 mm, and the no-volt switch (W026) is optional.
That suits Saturday mouldings on skirting offcuts if the router is inside those limits and 8 kg can live on a shelf. A body wider than about 190 mm, or taller than about 260 mm, does not fit. You drill the insert, and a low plate steps the moulding. Against the CRT/MK3 you give up the included switch and the 57 mm port. Standing at the fence every evening is a WRT purchase, not a larger W012.
When the floor-standing WRT wins
The Trend WRT is the table when you want standing height and you can leave about 27.5 kg on the floor. The listing states an 804 × 604 mm top, 240 V, a no-volt release, and the same fence, seven insert rings, mitre fence, finger boards, lead-on pin, and push stick as the CRT/MK3. Trend treats the WRT as the workshop table and the CRT as the benchtop. Stated edge planing is 1.4 mm and 2.4 mm. At £349.44, with 4.4 from 102 reviews, it is the dearest row here.
Buy it if a 410 mm bench is the posture you resent and the top has a permanent corner. Leave it if you must lift the table away after each session, because 27.5 kg against 13.6 kg is a different storage problem. One UK review says a Trend T12 did not suit the no-volt switch. Treat that as one router, not every Trend model. The router is still not in the box.
Listings most UK buyers should pause on
The SKIL SRT1039 shows 4.5 from 485 at £269.32, close to the CRT/MK3, with above-table bit adjustment on the listing. Those reviews are not from the United Kingdom, and the listing states 120 V. A pin adaptor does not make that a 230 V tool, and fitting a UK plug is not the fix. Leave the row unless a correct supply for this exact table is confirmed. The adjuster does not change the voltage. Switches, extraction, and the adaptor mistake are on router table dust and safety.
The BOXURN BX-RT150 at £149.46 shows 3.8 from 18. The review text is from the United States, and several comments describe a friction mount and a loose fence. The listing claims a base up to about 6 inches (152 mm) on a small aluminium and steel top, and a bullet mentions a jigsaw or a circular saw. Do not mount either in the plate. You pay about £60 more than the W012 for thinner UK evidence. Cast-iron tables outside this set are a separate purchase.
Common questions
Which router table is best for a hobbyist on a budget?
The W012 at £88.50 fits a 1/4 inch router with a base under about 190 mm and a body under about 260 mm. You drill the plate, and the no-volt switch is the optional W026, not something in the box. A 1/2 inch router pushes you to the CRT/MK3, at more than twice the price.
Is the Trend CRT/MK3 worth the mid-range price?
At £258.55 it is worth it for 240 V, a no-volt release in the box, a 610 × 405 mm top, and 293 UK-facing reviews, with a 1/2 inch Trend or DeWalt of the kind owners cite. Short 1/4 inch mouldings are a weaker case beside the W012. Plan for 13.6 kg from Trend's page, not the 1 kg amazon line.
Should I buy the Trend WRT instead of the CRT/MK3?
Choose the WRT at £349.44 when you want standing height and an 804 × 604 mm top more than a table you can lift onto a bench. Both are 240 V with a no-volt release and seven insert rings. Stay with the CRT/MK3 at 13.6 kg if 27.5 kg has nowhere to live. One review flags a T12 on the WRT switch, so check your router.
Is the Charnwood W012 good enough for mouldings?
It covers short mouldings with cutters around 35 mm on a 1/4 inch router, which is the hobby job Charnwood states. The 4.4 from 182 reviews reads as a starter, not full workshop capacity. Large bits and a tall 1/2 inch body are outside it. Shim or drill until the plate is flush, or the moulding steps.
Why is the SKIL table rated highly but risky for the UK?
The SRT1039 shows 4.5 from 485 at £269.32, which resembles the CRT/MK3 until you read 120 V. The review samples here are not from the United Kingdom, so the average is not evidence on a BS 1363 socket. A travel adaptor or a UK plug does not fix that. Above-table adjustment does not change the supply.
Is the BOXURN table a deal at about £150?
£149.46 is a deal only if the mount stays put, and UK reviews in this capture do not show that. The line is 3.8 from 18, with US comments on a friction mount and a loose fence. The W012 at £88.50 has a deeper UK review set on a smaller top you drill yourself. Treat the saw and jigsaw sentence as copy, not a setup.
Which table has a no-volt release in the box?
The CRT/MK3 and the WRT include a no-volt release. The W012 does not, because the W026 is optional. The SKIL switch sits on a 120 V listing, so it is not a reason to buy that table for a UK socket. BOXURN mentions a safety switch, which is thinner evidence than Trend's 240 V no-volt release. Confirm your router still starts through the Trend switch.
Related pages
Sources
Public UK sources from the research digest, used for this page in October 2026. Prices, stars and review counts are from the five amazon.co.uk listings captured on 19 October 2026. HSE dust limits and PUWER apply at work. They are not a certificate for a domestic table.
- HSE, Wood dust (retrieved 19 October 2026)
- HSE, WD5 Routers (retrieved 19 October 2026)
- legislation.gov.uk, PUWER 1998 (retrieved 19 October 2026)
- Trend, CRT/MK3 240 V (retrieved 19 October 2026)
- Trend, The fixed router (retrieved 19 October 2026)
- Charnwood, W012 bench top router table (retrieved 19 October 2026)
- Wealden, Safe use of a router (retrieved 19 October 2026)
- Electrical Safety First, Travel advice (retrieved 19 October 2026)