Independent comparisons. We may earn from shop links. More info

Best BGS torque wrench for clockwise car wheel nuts

Updated: 22 October 2026

You have a wheel off on the drive and a handbook figure you do not want to guess with a breaker bar. The best BGS torque wrench in this amazon.co.uk set for clockwise car wheel nuts is the BGS 2827: 1/2 inch, 40–220 N·m, £54.98, described as clockwise only. Many car handbooks sit around 110–120 N·m, and that scale leaves margin either side of the band. If you need a click the other way, or any fastener under 40 N·m, use a different model from the [BGS torque wrench comparison](/hub/hand-tools/bgs-torque-wrench). Peter F. checked the amazon.co.uk listings on 21 October 2026. We did not run a lab test. A qualifying purchase through our links can earn a commission at no extra cost to you.

You have a wheel off on the drive and a handbook figure you do not want to guess with a breaker bar.

Our top picks

BGS BGS 2806 60–340 Nm

Best overall

BGS BGS 2806 60–340 Nm
7.2/10about £106.76
View offer
BGS BGS 2829 60–330 Nm

Rank 2

BGS BGS 2829 60–330 Nm
6.8/10about £50.15
View offer
BGS BGS 2827 40–220 Nm

Rank 3

BGS BGS 2827 40–220 Nm
6.9/10about £54.98
View offer
On this page
  1. 1.Best in this set for clockwise wheel nuts
  2. 2.Why not the other 1/2 inch models
  3. 3.Who should skip it

Best in this set for clockwise wheel nuts

The 2827 is the model to keep for clockwise wheel nuts in this set. The drive is 1/2 inch (12.5 mm), which fits a normal wheel socket. The scale runs from 40 N·m to 220 N·m on a 525 mm body, with 72 teeth and a stated accuracy of ±3%. At £54.98 it stands next to the longer 2829 on price and well below the dual-direction 2806. Amazon shows 4.5 stars from 28 ratings, and the 2829 and the 2806 both show 4.8 on scales that start higher. You still take the 110–120 N·m band from your own handbook, and on this wrench that value sits clear of the first mark and clear of the last few newton metres. At the listing’s stated ±3%, 120 N·m allows about 3.6 N·m either way, which is the maker’s published claim. We did not measure these wrenches. The listing bullets do not mention a calibration certificate in the case. A workplace procedure that asks you to file a certificate points you to the 2806, which states one.

Why not the other 1/2 inch models

Two other 1/2 inch BGS wrenches draw the eye if you sort the set by stars. The 2829 is £50.15, with 4.8 stars from 30 ratings, a clockwise click, a stated ±3%, and a scale of 60–330 N·m on a 585 mm body. The 2806 is £106.76, with 4.8 stars from 93 ratings, 60–340 N·m, a 604 mm body, 48 teeth, a stated ±4%, a test certificate, and a click in both directions. Whether 60 N·m is low enough still depends on the handbook. The 2829 is a valid alternative if 60 N·m is still below your handbook figure and you may need more than 220 N·m, still clockwise. You give up the 40–60 N·m band the 2827 can set, and the click remains clockwise only. A UK review calls the adjuster smooth. Ignore the listing weight of 40 g, which cannot be the mass of a 585 mm steel wrench. Pay £106.76 for the 2806 when you turn a left-hand thread, or when you want the test certificate the listing states. On a right-hand wheel nut under 220 N·m, the second direction stays unused. The torque wrench clockwise only page takes the direction question from here.
BGS BGS 2806 60–340 Nm

Testsieger

BGS BGS 2806 60–340 Nm
7.2/10about £106.76
View offer

Who should skip it

Skip the 2827 when the fastener is under 40 N·m. Bicycle bolts and small brackets often sit in that band, and this scale has no mark for them. If you also torque a bike, keep a low-range wrench beside the 2827. The BGS torque wrench buying guide separates the 1/4 inch and 3/8 inch models from the 1/2 inch wheel wrenches. Above 220 N·m, move to the 2829, or to the 2806 if you need the other direction as well. The 2827 click is clockwise, so a left-hand wheel nut belongs with the 2806. A stretched stud, or a bolt that will not start by hand, is a job for a garage.

Common questions

Is the 4.8-star 2806 better than the £50 2827?
The BGS 2806 is the stronger buy when you need both directions or the test certificate on its listing. It costs £106.76, covers 60–340 N·m, states ±4%, and shows 4.8 stars from 93 ratings. The BGS 2827 costs £54.98, covers 40–220 N·m, states ±3%, clicks clockwise only, and shows 4.5 stars from 28 ratings. On right-hand wheel nuts inside 220 N·m, the extra money pays for a second direction and a certificate. The larger sample of reviews still leaves the click unchecked against your stud.
Why not the 961 at £24.44?
The BGS 961 stops at 110 N·m on a 280 mm body, with a 3/8 inch drive and an adaptor to 1/2 inch. Handbooks around 110–120 N·m put the wheel figure on the last mark or past it. The adaptor leaves the scale unchanged, and the listing states ±4% with a stop-screw lock. At £24.44, with 4.4 stars from 227 ratings, it suits fasteners inside 20–110 N·m. A wheel nut specified at 120 N·m is off the end of that scale.
Why not the 9576?
The BGS 9576 starts at 140 N·m, so a handbook figure of 110 or 120 N·m cannot be set on it. It is a 3/4 inch model, 830 mm long, about 5.01 kg, priced at £166.48, with a top mark of 980 N·m and a clockwise click. That range suits large fasteners inside 140–980 N·m. On a car wheel nut specified under 140 N·m, the adjustment cannot reach the number in the book.
Does the pick work on a left-hand wheel nut?
The BGS 2827 is for right-hand tightening. Its listing describes a clockwise click, and a left-hand wheel nut tightens anti-clockwise, with no stated measured release in that direction. The model that states both directions is the BGS 2806, at £106.76, marked 60–340 N·m. A ratchet lever that flips to undo a bolt turns the square without measuring the load. Check the handbook where you are unsure which studs are left-hand.
What if I also work on a bike?
Use the 2827 for the car and a second wrench for the bike. Many bicycle bolts sit under 40 N·m, below every mark on this scale. One wrench for both jobs leaves the bike under the stop, or pushes a wheel nut up a short scale such as the 961’s 110 N·m ceiling. The buying guide in this set separates the 1/4 inch and 3/8 inch models from the 1/2 inch wheel wrenches.

Related pages

BGS torque wrench for wheel nuts

BGS torque wrench

BGS torque wrench which size fits the handbook figure

Torque wrench clockwise only: the flip lever is not a click

How to set a click torque wrench and stop at the click

Sources

Sources for this comparison, last checked on 22 October 2026.

  1. ISO 6789-1:2017 sample, deviation by type and maximum torque (retrieved 22 October 2026)
  2. ISO 6789-2:2017 sample, interval of 12 months or 5,000 cycles (retrieved 22 October 2026)
  3. Avon Dynamic ADCF112, UKAS calibration guidance (retrieved 22 October 2026)
  4. AWS white paper on ISO 6789:2017 (retrieved 22 October 2026)
  5. BGS technic torque wrench product page (retrieved 22 October 2026)
  6. Barum, tightening wheel nuts (retrieved 22 October 2026)
  7. Ingersoll Rand UK, how much torque you need (retrieved 22 October 2026)
  8. HSE L22, PUWER 1998 (retrieved 22 October 2026)