Independent comparisons. We may earn from shop links. More info

Best welding gloves UK: picks by process

Updated: October 2026

The best welding gloves UK buyers can choose from this amazon.co.uk set depend on the job, not the largest star count. A long split-cowhide gauntlet makes sense when MIG or stick spatter reaches your forearm. A soft goatskin palm is the better starting point when TIG filler control is the difficult part. The [welding gloves comparison](/hub/soldering-and-welding/welding-gloves) lists all 11 stored products and their prices. This shortlist applies those facts to three buying situations. It does not claim a laboratory test, and none of the listings prints a BS EN 12477 Type A or Type B classification. Prices are stored GBP shelf prices. A qualifying purchase through our links can earn a commission at no extra cost to you.

The best welding gloves UK buyers can choose from this amazon.co.uk set depend on the job, not the largest star count. A long split-cowhide gauntlet makes sense when MIG or stick spatter reaches your forearm.

Our top picks

WZQH WZQH

Best overall

WZQH WZQH
9.4/10about £16.99
View offer
UCI Ultimate Industrial WGR

Best value

UCI Ultimate Industrial WGR
9.4/10about £7.07
View offer
Predator By Ron Predator By Ron

Alternative

Predator By Ron Predator By Ron
9.2/10about £7.75
View offer
On this page
  1. 1.Best long cowhide glove for MIG or stick
  2. 2.Best for TIG filler-rod feel
  3. 3.Best welding gloves under £10
  4. 4.What best cannot mean in this set

Best long cowhide glove for MIG or stick

WZQH is the conditional top pick for a long cowhide gauntlet. It measures a stated 16 inches, including a 7.5-inch sleeve, and claims 1.2 mm shoulder-split cowhide, a cotton-containing lining and flame-retardant Kevlar thread. At about £16.99 it carries 4.7 stars from 26,149 reviews. Those are marketplace signals, not proof of welding performance. The seller limits 350°C to a short period and warns that prolonged heat can char the leather. That is more useful than an unexplained 500°C claim, and it is still not an EN 407 level. The listing does not show Type A. Much of the UK review text concerns thorns, stoves and grills, so the review count is not 26,149 welding trials. Skip WZQH if a workplace needs a documented Type A glove, if you need close TIG control, or if the real task is gardening. RAPICCA is the heavier alternative at about £19.98, with claimed 1.5 mm leather, and reviewers still report heat at the fingers. The checks sit in the welding gloves buying guide.

Best for TIG filler-rod feel

Predator By Ron is the clearest TIG-shaped option. It uses a goatskin palm, a stated 13-inch length and a weight of 170 g. Reviewers describe it as soft enough to handle a filler rod. The stored price is about £7.75, with 4.6 stars from 134 reviews. The listing does not state BS EN 12477 Type B or a numerical heat result. One busy-workshop reviewer said the pair lasted about two weeks and could not handle that workload. Choose Predator when filler feed matters more than spatter resistance. Do not choose it for heavy MIG, flux-core or stick because the title says welding glove. Intra-FIT, about £24.99, claims a shaped grain-cowhide palm and an extra-long cuff, but 4.7 stars from only 61 reviews and no stated type do not make it a thin TIG glove. The TIG versus MIG welding gloves guide explains that fork.
WZQH WZQH

Testsieger

WZQH WZQH
9.4/10about £16.99
View offer

Best welding gloves under £10

Ultimate Industrial WGR is the best value at about £7.07. It states 1.0 mm leather, a fleecy lining, a cotton-lined cuff and EN 388 4123, with 4.7 stars from 420 reviews. That mechanical-risk code is more specific than heat resistant alone, and it is not Type A or Type B. Buyers mention smell, long fingers and cotton shedding. The title says gauntlet while the sleeve attribute says short sleeve, so check the cuff against your jacket. AUAUY, about £8.99, offers a stated 33 cm cuff, claimed 1.3 mm cowhide and a 200°C seller line. Reviewers say it runs large, and one arrival had a hole in the palm. Inspect it cold. Predator also falls under £10, but it belongs in the TIG decision. A low price does not erase the process difference.

What best cannot mean in this set

No product here is the best certified welding glove, because none of the stored listings shows a BS EN 12477 type. QeeLink names EN 388 and EN 407 without performance digits. ANSI/ISEA heat attributes are not EN 407 digits. WZQH is the top pick for a long cowhide shape when you accept the documentation gap. Predator is the light-TIG pick. Ultimate Industrial is the best-value entry pair, not a certified Type A bargain. A workplace buyer should obtain the declaration rather than treat this shortlist as a substitute. A visor, flame-resistant clothing and fume control stay separate, and these gloves are not insulating gloves for UK mains. Stop when a pair is holed, split or charred.

Common questions

Which pair should I buy for occasional MIG?
WZQH is the conditional top pick in this stored set because it combines a 16-inch cuff, claimed 1.2 mm split cowhide and a £16.99 price. Choose it only if the fit works and you accept that the listing does not state BS EN 12477 Type A.
Is the number-one ranked glove automatically the best?
No. Rank and review volume show marketplace activity, not process suitability or certification. WZQH has the strongest stored rating signal, but many review texts concern non-welding jobs and its listing does not print an EN 12477 type.
What is the best option here for TIG?
Predator By Ron is the most clearly TIG-oriented listing because its soft goatskin palm supports filler-rod feel. It is not stated to be Type B and should not be used as the default for heavy MIG or stick spatter.
Is £7 enough for welding gloves?
It can buy an occasional-use leather gauntlet such as the £7.07 Ultimate Industrial WGR, but price does not establish welding certification. Check cuff coverage, fit, condition and complete markings, and replace the glove if heat, holes or open seams appear.
Why is Intra-FIT more expensive with fewer reviews?
Its listing claims a shaped grain-cowhide palm, reinforcement, fleece lining and an extra-long cuff rather than a basic split-leather gauntlet. Those construction details may suit a MIG user, but the £24.99 price does not provide a stated BS EN 12477 type.
Can I use the same top pick on a log burner?
Long cowhide gauntlets are commonly used for brief stove tasks, but the seller temperature is not a holding time. Follow the stove manual, keep the leather out of flame and stop if heat reaches your hand. A welding ranking does not certify stove contact.

Related pages

Welding gloves for a log burner

How to use welding gloves

Welding gloves

Welding gloves buying guide before you compare price

TIG vs MIG welding gloves for filler feel or spatter

Sources

Public UK sources and the stored amazon.co.uk listings in this set. Shelf prices were not rechecked live on 17 October 2026.

  1. BSI, BS EN 12477:2001 protective gloves for welders (retrieved 17 October 2026)
  2. SATRA, EN 12477 table (retrieved 17 October 2026)
  3. BSI project summary, welders’ gloves (retrieved 17 October 2026)
  4. SATRA, EN 407:2020 (retrieved 17 October 2026)
  5. Polyco Healthline, contact heat (retrieved 17 October 2026)
  6. HSE, welding controls (retrieved 17 October 2026)
  7. HSE, PPE overview (retrieved 17 October 2026)
  8. GOV.UK, PPE marking, UKCA and CE (retrieved 17 October 2026)