Belt sander price UK: handheld, bench or a hire day

Belt sander price UK in this amazon.co.uk comparison runs about £45 to £160. Handheld, file, bench and one named hire day, checked on 16 October 2026.
On this page

You have a stripped door, a £45 handheld in one tab, a 13 kg bench machine at £159.99 in another, and a hire page quoting a day rate for a floor drum. A belt sander price UK search treats those as one purchase. They are not. The amazon.co.uk listings in this comparison, stored on 16 October 2026, run from £44.99 to £159.99, and a published hire line is a different machine. The pounds buy a form, a belt size and a depth of reviews, not a laboratory test.
How much is a decent belt sander UK depends on the job in front of you. A 76 mm handheld strips a door, a 13 mm file reaches a stair corner, and a belt-and-disc stays on the bench. An 8 inch hire drum is for a room of boards. Mixing those prices into one bargain is how a cheap belt sander becomes the wrong machine.
In short
On 16 October 2026 this amazon.co.uk set sat at about £45 to £64 for handhelds, a power file and a mini sharpener, and at £159.99 for the Bucktool belt-and-disc. A floorsanderhire.com one-day line of £35 was a different machine. Fifty pounds can cover light flat work when the reviews are deep and you add belts, and it is the wrong budget for a whole floor or a guarded bench.
The belt sander price UK cluster
This comparison has two bands, then one machine on its own. About £45 to £51 is the KATSU at £44.99, the KA900E at £47.94, the Einhell TC-BS 8038 at £48.94 and the GALAX PRO at £50.99. About £56 to £64 is the Sbestily at £55.99, the JOJOCY at £58.99, the KA88 at £59.49, the DEKO and the Enventor at £59.99, and the SHALL at £63.99. The Bucktool belt-and-disc is £159.99. Corded handhelds in this set sit under £65.
Those names are forms. The KA900E is a 350 W file, the Sbestily is a mini sharpener, and the JOJOCY is a cordless belt without a battery. The belt sander comparison holds the table. The figures are the 16 October 2026 shelf, not a Which? test.
Open the Einhell for flat stock removal at the entry price. It is 800 W and 230 V, at £48.94, with 4.3 from 2,509 reviews on doors and boards. That record includes belts that cut the housing, and the box holds one P80 belt. The listing does not state the length. One reviewer says 75×533 mm fits, and no badge comes from the stars.
The KATSU is £44.99 and 900 W, with 4.3 from 40 reviews and nine texts stored. Two describe a belt that flew off with melted plastic in about ten minutes, and a lock that failed on first use. Four pounds under the Einhell is a thin reason to take that shorter record onto a door. A purchase via the comparison can earn a commission at no extra cost to you.
Why the bench machine costs more
The belt and disc sander price is not extra watts. The Bucktool is 370 W, while handhelds here run 720 W to 1010 W and cost about a third as much. You pay for the format. You hold the wood against a 100×915 mm belt, horizontal or vertical, beside a 150 mm disc at 2,000 to 4,000 rpm. The machine weighs about 13 kg, and dust leaves a 60 mm port, so you need an extractor rather than a cloth bag.
That suits ends, edges and small parts when you also want a disc. It will not sand a hung door, because it does not travel to the timber. If you will walk a tool along flat stock, £159.99 buys a job you will not do. The buying guide splits that choice before brand names.
The Bucktool shows 5.0 from one amazon.co.uk review, which praises speed control and the disc. The listing does not say whether belts are in the box. You are buying the bench format in this set, not a proven service life.
A cheap belt sander can be the wrong shape
A power file price near £50 is not a wide belt. The KA900E is 350 W and about 2.1 kg, with a stated 13 mm width. A UK reviewer gives the belt as 13×451 mm, and there is no tracking adjustment. Three belts are in the box, and it has 4.5 from 95 reviews. Use it in stair corners and on welds, and keep it off a door, where a 13 mm belt dishes a groove.
The cordless belt sander price is the JOJOCY at £58.99. The belt is 330×10 mm, twenty belts are included, and the battery is not. It takes DeWalt 20 V Max packs, so the shelf price is the whole bill only if you already own one. The attributes print 220 V, while the bullets describe a battery pack. Twelve reviews at 4.2 cover small areas and a tight battery fit. It is a detail grinder, not a door sander.
The Sbestily at £55.99 is a knife and tool sharpener, with 5.0 from one review and no stored text. The belt length is not given. That sum suits a sharpener, and it is a muddle if the photo looked like a floor tool.
A 1010 W handheld and this 350 W file can both sit near £50, and only the wider belt levels a board. UK mains are 230 V, so the plug should be BS 1363. Electrical Safety First advises against a travel adaptor. A 220 V line, on the DEKO and the Sbestily, means you check the plug in the box.
Floor sander hire cost beside a purchase
A hire day is a different product from a shelf price. floorsanderhire.com listed an 8 inch belt floor sander with a one-day line of £35 on 16 October 2026. That is one firm's figure, not a UK average. VAT was not obvious on that line. Abrasives and any deposit change what you pay, so read them before you book. Do not paste £35 onto the Einhell and call it a discount.
A handheld you keep costs about £45 to £64 here, plus belts. GALAX PRO owners describe floorboards and garage doors, at £50.99, 4.1 from 156 reviews, with five P80 belts and dust-bag complaints. The KA88 at £59.49, 4.2 from 357 reviews, comes up beside skirting, and the belt wanders. A patch or a deck can justify the purchase, while a whole room is where the drum earns the day rate.
The floor page sets the threshold between a patch and a room. Hiring does not leave you a tool for next month's door.
A cloth bag is not an M-class extractor. At work the hardwood dust limit is 3 mg/m³ over eight hours. Empty the bag before metal, because sparks and wood dust are a fire risk.
Belts, stars, and a tool that fails early
A coarse belt can die on the first afternoon, so the shelf price is not the job price. This set stores no refill-pack price. The Einhell and the KATSU include one P80 each, the GALAX PRO includes five, and the DEKO at £59.99 includes ten from 40 to 180 grit. A £48.94 tool with one belt is not the same first day as a £59.99 tool with ten.
Match the rollers. The usual handheld here is 76×533 mm, also sold as 75×533 mm, and a 76×457 mm belt will not fit. The Bucktool takes 100×915 mm and the KA900E is a 13 mm file. The wrong pack spends the saving you made on the tool.
A 5.0 is a weak reason to pay more. The Bucktool and the Sbestily have one review each, and the SHALL's seven include Vine first looks. The Einhell's 4.3 from 2,509 includes housing damage, which is what a long record shows. The DEKO is 1010 W with only 18 reviews.
The Consumer Rights Act 2015 gives a short-term right to reject goods that are not of satisfactory quality, generally within 30 days. Photograph a motor that smokes in the first minutes and keep the box. A two-year warranty bullet is only the paper in the carton. This guide uses the 16 October 2026 listings and the hire line above, with no laboratory trial.
Common questions
What do belt sanders cost on amazon.co.uk?
Is under £50 enough for a belt sander?
Why is the bench machine three times the price?
Does a power file cost the same as a wide belt?
How does a hire day compare with buying?
Are Toolstation prices the same as Amazon?
What does a 5.0 from one review not tell you?
Do I need spare belts in the budget?

Peter F. is the editor for DIY & tools at productscompared.co.uk. Comparisons in this category are checked against amazon.co.uk listings, review evidence and public UK sources.
Related articles

Hire a floor sander or buy a handheld
A one-day drum hire and a £50 handheld are different tools. When a room of boards outgrows the machine you can carry.

Belt sander or random orbital sander
A belt strips stock quickly and leaves tracks an orbital sander would not. When the cheaper belt is the wrong tool.

Sanding belt sizes that actually fit
75×533 mm and 75×457 mm are both sold in the UK and do not swap. Order the length your rollers actually take.