Independent comparisons. We may earn from shop links. More info

Best honing guide for chisels: who should skip which

Updated: 22 October 2026

You want one honing guide to buy this week, not a tour of every roller on amazon.co.uk. The best honing guide for chisels in this set depends on the job. If you already own a flat stone, the largest clamp review file is the Faithfull side clamp. If you want the angle on a block and a wide roller, and the chisels are full length, the buy is the Trend. Each pick has a skip line. The [chisel honing guide comparison](/hub/hand-tools/chisel-honing-guide) lists all twelve rows, with GBP prices from 19 October 2026. Peter F. compared those listings. We did not grind a set of edges. A qualifying purchase through our links can earn a commission at no extra cost to you.

You want one honing guide to buy this week, not a tour of every roller on amazon.co.uk. The best honing guide for chisels in this set depends on the job.

Our top picks

Gohelper Gohelper honing guide kit

Best overall

Gohelper Gohelper honing guide kit
7.4/10about £29.99
View offer
Faithfull Faithfull honing guide

Rank 2

Faithfull Faithfull honing guide
8.3/10about £8.15
View offer
Trend Trend honing guide DWS/HG/SET

Alternative

Trend Trend honing guide DWS/HG/SET
6.5/10about £24.95
View offer
On this page
  1. 1.Best value if you already own a stone
  2. 2.Top pick if you want the angle on a block
  3. 3.What not to crown
  4. 4.If your chisels are short

Best value if you already own a stone

The best-value honing guide, when the stone is already on the bench, is the Faithfull FAIHG, at £8.15, with 4.2 from 2,240 reviews. It is an Eclipse-pattern side clamp from 3 mm to 67 mm. On the chisel jaws, 30 mm of projection is 30° and 40 mm is 25°. On the plane jaws, 38 mm is 30° and 50 mm is 25°. The box is the guide. You supply the oil, water, or diamond stone. That price is what the main comparison also ranks first. Faithfull's own shop lists the same guide at £14.16 including VAT. The comparison's separate best-value mark sits on the Gohelper kit, because the scoring rule will not put both marks on one row. On this page the cheaper guide-only buy, if you already own a stone, is still the Faithfull. The decision order is the honing guide buying guide.

Top pick if you want the angle on a block

When you want the angle as a stop rather than a measured projection, the pick in this set is the Trend DWS/HG/SET, at £24.95, with 4.1 from 566 reviews. The block is marked 25°, 30°, 35°, and 40°. Chisels are listed from 10 mm to 32 mm, and plane irons up to 60.3 mm. The roller is wide. Do not read the title as a diamond stone. The bullets ask for a diamond bench stone at least 63 mm by 178 mm, and UK reviews say the stone was not in the box. Trend's own shop had the set at £41.65. Do not copy Faithfull's 30 mm and 40 mm onto this block. How far to set a blade is the how to use a honing guide page.
Gohelper Gohelper honing guide kit

Testsieger

Gohelper Gohelper honing guide kit
7.4/10about £29.99
View offer

What not to crown

Oiieco is 5.0 from two ratings, at £28.99, with no review text. SHARPAL's thousands of reviews are mostly knives, and that finder does not clamp a chisel. Dioche at £56.59, with 3.6 from four ratings, is not the Veritas Mk.II, which sits outside this ASIN set. Gohelper, at £29.99 with 4.6 from 520 reviews, is a real alternative if you want a gauge and a fixture, and the title says the stone is not included. It is not the top pick on this page. Saker's kit at £32.39 is an off-centre roller plus a 400/1000 plate, and reviews say the plate is short.

If your chisels are short

Neither the Faithfull nor the Trend is the honest answer when the blade cannot reach the projection. Trend says so on the listing. Faithfull does not print a minimum length, and 30 mm or 40 mm of stick-out is still a length. Saker's titles say short chisels and print no length floor. A title is not a measured minimum. If every chisel is a butt chisel, the honing guide for short chisels page is that constraint.

Common questions

What is the best-value honing guide if I already own a stone?
The Faithfull FAIHG at £8.15, with 4.2 from 2,240 reviews. It is the guide only, from 3 mm to 67 mm, for oil, water, or diamond. Skip it if the chisels are too thick for the jaws or you want a wide roller. The comparison's separate value mark sits on Gohelper so the two marks do not share a row.
What is the pick if I do not want to measure millimetres?
The Trend DWS/HG/SET at £24.95, with stops at 25°, 30°, 35°, and 40°, and 4.1 from 566 reviews. You still need a diamond stone at least 63 mm by 178 mm. The reviews say that stone was not in the box. Do not copy a Faithfull projection onto this block.
Who should skip the Faithfull guide?
Skip it for thick chisels that will not clamp, for jaws clogged with paint, and if a narrow roller has already rocked your edges out of square. Also skip it for a butt chisel that cannot reach 30 mm or 40 mm of projection. The bullets say five years and the warranty field says one year.
Who should skip the Trend guide?
Skip it for firmer chisels and short-blade butt chisels, which the listing excludes. Skip it if you are paying £24.95 because you think a diamond stone is included. The maker's shop price in this capture was £41.65, for the guide. The manual's 75 mm minimum at 25° is not on the Amazon page.
Is the highest star rating the best jig?
No. Oiieco's 5.0 is two ratings. SHARPAL's thousands of ratings are mostly knives, and that tool does not clamp. Gohelper's 4.6 from 520 reviews is a stronger file than a perfect pair of ratings, and it is still a guide-only kit. A higher sticker is not a substitute for a width and a sample.
Does the best pick include a diamond stone?
The Faithfull does not. The Trend title sounds like a set, and the reviews say the stone was missing. Saker's £32.39 kit does describe a 400/1000 plate, and buyers say that plate is short. A 400/1000 pair is a coarse face and a medium face, not a polish.

Related pages

Side clamp or angle fixture

Chisel honing guide

Honing guide for chisels and plane irons: how to choose

How to use a honing guide without rounding the edge

Honing guide for short chisels: length and the angle

Sources

Public UK sources from the research digest, last checked on 19 October 2026. Shelf prices and star lines are the amazon.co.uk figures in the display file.

  1. Faithfull Tools, FAIHG honing guide (retrieved 19 October 2026)
  2. Faithfull honing guide instructions (retrieved 19 October 2026)
  3. Trend DWS/HG/SET diamond honing guide set (retrieved 19 October 2026)
  4. Trend DWS/HG instruction sheet (retrieved 19 October 2026)
  5. GOV.UK, General Product Safety Regulations 2005 (retrieved 19 October 2026)
  6. Consumer Rights Act 2015, goods remedies (retrieved 19 October 2026)
  7. HSE, woodworking standards (retrieved 19 October 2026)
  8. Common Woodworking, using a honing guide (retrieved 19 October 2026)