Independent comparisons. We may earn from shop links. More info

Best 90 degree drill attachment

Updated: 2026-10-23

You already know the gap is tight, and you are looking at the twelve amazon.co.uk listings in this set. The best 90 degree drill attachment depends on the job: a compact impact screw, a round bit, a reach around a pipe, or one cheap cabinet screw. Star order alone would put a 5.0 from three reviews above a 4.7 from 21,560. This page names a pick and a skip for each job. The full table stays on the [right angle drill attachment comparison](/hub/drilling-and-accessories/right-angle-drill-attachment). Products Compared read those listings and maker pages, not a lab, on 22 October 2026. A qualifying purchase can earn a commission at no extra cost to you.

You already know the gap is tight, and you are looking at the twelve amazon.co.uk listings in this set.

Our top picks

Milwaukee Milwaukee 4932471274

Best overall

Milwaukee Milwaukee 4932471274
9.2/10about £14.95
View offer
DeWalt DeWalt DWARA120

Alternative

DeWalt DeWalt DWARA120
9.0/10about £24.99
View offer
ColumPRO ColumPRO 105 degree

Best value

ColumPRO ColumPRO 105 degree
7.9/10about £6.99
View offer
On this page
  1. 1.Compact impact head
  2. 2.Round bits in a 90-degree chuck
  3. 3.Reach around an obstacle
  4. 4.One light screw, low budget
  5. 5.What not to crown

Compact impact head

Three listings say they are for an impact driver. The DWARA120 is £24.99 with 4.7 from 21,560 ratings: 1.5 inches front to back, a magnet, and the head only. Reviewers praise the size and struggle to pull small bits out. Choose it for the longest rating file if you already own 1/4 inch bits. The DT20500-QZ is £23.95 with 4.5 from 882 ratings. Bullets and a UK dealer page state 43 Nm, 38 mm and quick ejection. Do not paste 43 Nm onto a DWARA120 title. The Milwaukee 4932471274 is £14.95 with 4.8 from 5,281 ratings, the highest score here, so it is the top pick when you also want bits: true 90 degrees, 36 mm, impact-rated for 18 V drivers, plus ten bits. The 200 Nm cell is not a stated torque. Model numbers that disagree are on the impact-driver page.

Round bits in a 90-degree chuck

Hex heads will not hold a round twist bit. The DODUOS adapter is £16.89 with 4.1 from 432 ratings: a true 90-degree head, an 8 mm hex shank, a keyless chuck from 0.8 mm to 10 mm, 25 Nm, and a 110 mm handle. Impact use is not stated. Reviews include a chuck that loosened, a bit left in the wood, a first-hole failure, and one unit that arrived in pieces. It is the pick for a light hole on a cordless drill. The HSEAMALL is the same shape at £16.99, 4.6 from 28 ratings. Those higher stars do not outrank the DODUOS sample. Skip both on an impact driver.
Milwaukee Milwaukee 4932471274

Testsieger

Milwaukee Milwaukee 4932471274
9.2/10about £14.95
View offer

Reach around an obstacle

The DeWalt DWARAFS-Z is £39.84 with 4.5 from 5,947 ratings: a 90-degree Rapid Load head on a 12 inch flexible shaft, with a side handle. The listing names DeWalt drills. One UK review says driving, not drilling, and the bullets do not state an impact rating. The 300 Nm and air-powered cells are not the product. It is the pick when a rigid 36 mm or 38 mm head cannot turn the corner and you are driving a screw. Skip it when the gap is simply shallow. A flexible shaft is not a premium Milwaukee head.

One light screw, low budget

For a few furniture screws, the ColumPRO OB05-205 is £6.99 with 4.0 from 360 ratings: 105 degrees, 1/4 inch hex and 10 Nm, for a drill. You must grip the body. It is the best value for that light job, and the wrong tool on an impact driver or where the gap needs a square 90. Square against offset is on the 90 vs 105 page. The S003-105 at £11.99 adds 50 mm and 25 mm bits, and the impact line describes the bits, not the head. The QHSXMQ kit at £6.80 has reviewers who say the 90-degree piece will not fit a drill.

What not to crown

Do not crown the FEITONGFX set. It is £9.99 and 5.0 from three ratings, and impact is not stated. Three fives are not a better record than 21,560 ratings at 4.7. Do not crown the QOTSTEOS because the bullets say impact rated for 18 V drivers. It is £12.99 with 4.1 from 81 ratings, and reviews include a first-use break. That sentence is copied wording, not a peer of the Milwaukee file.

Common questions

Which listing is the compact impact head with the most ratings?
The DeWalt DWARA120 at £24.99, with 4.7 from 21,560 amazon.co.uk ratings. The bullets say it is engineered for impact drivers and 1.5 inches front to back. The box is the head only, and reviewers struggle to pull small bits out.
Is the DT20500 the same tool as the DWARA120?
No. The DT20500-QZ is the modular head at £23.95, with 43 Nm and 38 mm in the bullets and on a UK dealer page. The DWARA120 is the separate compact head with the much larger rating file. Putting 43 Nm on a DWARA120 title is a retailer mix-up.
Is the Milwaukee set only a bit pack?
No. ASIN B081QJ9YM9 is the Shockwave right-angle attachment plus ten bits, at £14.95 and 4.8 from 5,281 ratings. It is not the older 49-22-8510, whose manual says not to use an impacting tool.
What if I need round drill bits rather than hex bits?
Use a keyless chuck, not the Milwaukee or DeWalt hex heads. In this set that is the DODUOS at £16.89 or the HSEAMALL at £16.99, both 0.8–10 mm on an 8 mm shank. Impact use is not stated. The DODUOS file includes a loose chuck, so keep the hole light and the host on a drill.
Who should skip a no-name head that copies impact rated?
Skip the QOTSTEOS on an 18 V impact driver for regular work. The bullets use that phrase, and reviews include bearings falling out and a first-use break, from 81 ratings at 4.1. A 5.0 from three FEITONGFX ratings is not a better record than 21,560 at 4.7.

Related pages

Right angle drill attachment buying guide

How to use a right angle drill attachment

Right angle drill attachment

90 vs 105 degree drill attachment for tight UK gaps

Right angle attachment for your 18 V impact driver

Sources

Public UK and maker sources are listed below. Shelf prices, stars and review counts are the amazon.co.uk figures for this comparison. This page did not lab-test the attachments.

  1. HSE, PUWER overview (retrieved 22 October 2026)
  2. HSE, inspection of work equipment (retrieved 22 October 2026)
  3. GOV.UK, Supply of Machinery (Safety) Regulations 2008 (retrieved 22 October 2026)
  4. HSE, UKCA marking and work equipment (retrieved 22 October 2026)
  5. GOV.UK, product marking (retrieved 22 October 2026)
  6. Consumer Rights Act 2015 (retrieved 22 October 2026)
  7. Milwaukee Tool, Shockwave right angle attachment 4932471274 (retrieved 22 October 2026)
  8. Power Tool Centre, DeWalt DT20500 (retrieved 22 October 2026)
  9. Yandles, Milescraft Drill90PLUS (retrieved 22 October 2026)