Independent comparisons. We may earn from shop links. More info

Best solder fume extractor UK

Updated: 2026-10-21

You solder on the kitchen table twice a month, or you repair boards most evenings, and you want one best solder fume extractor UK rather than twelve tabs. The highest star count in this set is a carbon-pad fan, and that is not the same recommendation as a hose unit with a named HEPA class. This page says which class is the top pick for regular joints, which is best value for occasional work, and who should skip both. Prices are the stored amazon.co.uk figures. Peter F. did not lab-test these units. A qualifying purchase can earn us a commission at no extra cost to you. The full shelf table is on the [fume extractor comparison](/hub/workshop/fume-extractor).

You solder on the kitchen table twice a month, or you repair boards most evenings, and you want one best solder fume extractor UK rather than twelve tabs.

Our top picks

WEP WEP 948DQ-I

Best overall

WEP WEP 948DQ-I
6.7/10about £38.99
View offer
FumeClear FumeClear FC-100A

Alternative

FumeClear FumeClear FC-100A
7.1/10about £319.99
View offer
FumeClear FumeClear FC-2001S

Rank 3

FumeClear FumeClear FC-2001S
7.4/10about £149
View offer
On this page
  1. 1.Best has to name the job
  2. 2.Regular soldering in a small room
  3. 3.Occasional joints and a window
  4. 4.What not to call the best solder extractor

Best has to name the job

Best here means the unit whose filter and capture match how often you solder, not the row with the most reviews. HSE’s solderers page says bench-mounted boxes are of limited use unless they have a HEPA filter. SR20 says recirculated air needs that HEPA stage and a replacement programme. A 4.6 from 2,442 reviews can still be a 0.4 inch carbon pad with a Euro plug. That evidence is real, and it answers a different question from an H12 hose. The decision order, including the plug, is on the solder fume extractor buying guide.

Regular soldering in a small room

For regular flux fume in a small room, where the air comes back into that room, the top pick in this set is the FumeClear FC-2001S. It is £149, with a claimed 128–168 m³/h, three speeds, a pre-filter, an H12 stage and carbon. The star line is 4.4 from 125 reviews. Five pre-filters and a 2-in-1 main filter are in the box. The part number says FC-2001S UK and the voltage line is 220 V. The plug shape is still not in the technical table, so you check the pins before you treat it as a British lead. The KINGSOM K7 is the cheaper named H13 option at £119.99, with a 66 cm hose, 4.6 from 25 reviews, and an unstated plug on a 110–220 V DC line. Twenty-five reviews cannot show a year of filter life. The FC-100A at £319.99 claims 200–260 m³/h and H13, at 4.5 from 135 reviews and 9.52 kg. That is the step up when you want the higher stated airflow and you have checked the mains lead. It is not a COSHH certificate.
WEP WEP 948DQ-I

Testsieger

WEP WEP 948DQ-I
6.7/10about £38.99
View offer

Occasional joints and a window

If you make a few joints, the room is ventilated, and you can keep the work close to the grille, the best value in this set is the WEP 948DQ-I at £38.99. It is 4.6 from 38 reviews, with carbon pads front and rear, a 10 cm suction claim, helping hands and spare adsorbers. It is the only listing here that states 220–240 V and a Type G plug. There is no speed control and no HEPA class. HSE’s caution on bench boxes still applies: this pulls the plume off your face at short range and returns air through carbon. The KOTTO is cheaper at £35.99 and much more reviewed, at 4.6 from 2,442, with a 0.4 inch carbon filter. Two UK reviews say it arrived with a Euro plug. That is why it does not take best value. A Euro lead on a UK socket is a buying fault before the filter does any work. The Preciva at £39.99 has a larger review sample and no stated plug. The SainSmart CSE01 at £30.99 is USB-C and carbon only, so it is not a HEPA substitute. Flux and pad-fan distance are on the fume extractor for soldering page.

What not to call the best solder extractor

Three products in the wider set are answering a different job, and a star row will not turn them into a solder extractor. The Nordswal at £179 is a 370 W blower with a claimed 3,600 m³/h and a 10 m duct, and no filter. One verified UK review alleges a failed grommet and poor crimps on a switched-neutral metal case. Stop using a unit that matches that description and do not buy it to filter flux. The FumeClear FC-2001X at £229 names H13 and a 60 mm hose for diode lasers up to 15 W and fibre up to 5 W. The listing has no review line. It is a laser listing, not the top pick for an iron.

Common questions

What is the best solder fume extractor for regular home electronics work?
In this set the top pick for regular soldering in a small room is the FumeClear FC-2001S at £149. It names H12, a pre-filter and carbon, with 128–168 m³/h claimed and 4.4 from 125 reviews. The plug shape is not stated, and UK reviews report a cracked plastic tube. Those reviews are shared with the FC2001A, so they are one pool.
What is the best value if I only solder occasionally?
The WEP 948DQ-I at £38.99 is the best value for occasional close joints. It states a Type G plug, carbon pads and a 10 cm claim, at 4.6 from 38 reviews. It has no HEPA class. Use it with the grille close to the joint and the room ventilated. It is not the regular-room control.
Why not buy the one with thousands of reviews?
The KOTTO has 4.6 from 2,442 reviews at £35.99, and the filter is a 0.4 inch carbon pad. UK reviews say it arrived with a Euro plug. Review volume shows that people buy this shape. It does not show a HEPA stage or a BS 1363 plug.
Is the £320 FumeClear automatically the top pick?
No. The FC-100A at £319.99 names H13 and 200–260 m³/h, with 4.5 from 135 reviews, and it weighs 9.52 kg. Voltage and plug are unstated. It is the higher-airflow option when you have checked the lead. For a small iron, the £149 FC-2001S is the top pick in this set.
Which units should I skip for soldering?
Skip the Nordswal if you want filtration, because none is listed. Skip the FC-2001X as a solder answer, because the title is a small laser and the listing has no reviews. Skip the SainSmart if you were looking for HEPA. Skip the FC2001A if the FC-2001S is in stock, because you pay more for a table that does not name an H-class.

Related pages

How to use a solder fume extractor

Fume extractor

Solder fume extractor buying guide: filter and plug

Laser engraver fume extractor for a small UK diode

Fume extractor for soldering: carbon pad or HEPA hose

Sources

Public UK sources and the amazon.co.uk listings compared on this page. Updated October 2026.

  1. HSE SR20: Soldering with rosin-cored solder (retrieved October 2026)
  2. EH40/2005 Workplace exposure limits (retrieved October 2026)
  3. HSE INDG248: Solder fume and you (retrieved October 2026)
  4. HSE: Solderers and asthma (retrieved October 2026)
  5. HSE: Local exhaust ventilation FAQs (retrieved October 2026)
  6. HSE HSG258: Controlling airborne contaminants at work (retrieved October 2026)
  7. HSE RR1146: 3D printer emissions (retrieved October 2026)
  8. Somerset Solders: BOFA V200 fume extraction system (retrieved October 2026)