Independent comparisons. We may earn from shop links. More info

Workshop blog | UK plugs, costs, safety and checks

Blog10 articles

Workshop guides for a UK shed or garage: bench-supply cost, BS 1363 plugs, CC lamps, PAT checks, scaffold towers, presses, lathe chucks and stair carts.

Bench power supply cost UK: what £50 to £300 buys
Cost7 min read

Bench power supply cost UK: what £50 to £300 buys

You have two amazon.co.uk tabs open. One variable supply is £39.99. Another, described as linear, is £299. The bench power supply cost UK buyers meet

October 2026Read article
Charge a battery with a bench power supply: when to stop
Rules7 min read

Charge a battery with a bench power supply: when to stop

The crocodile clips are already on the pack and the constant-current lamp is lit. Charge a battery with a bench power supply is the search that usuall

October 2026Read article
Bench power supply stuck on CC: the limit is working
Diagnosis7 min read

Bench power supply stuck on CC: the limit is working

You set 12 V, clipped the board on, pressed output, and the display fell to a volt or two while CC lit. A bench power supply stuck on CC is almost alw

October 2026Read article
Mobile scaffold tower inspection UK: before you climb
Rules7 min read

Mobile scaffold tower inspection UK: before you climb

The tower is standing on the workshop concrete, the job is a ceiling or a high shelf a stepladder will not reach, and someone is about to step onto th

October 2026Read article
PAT testing home workshop: what the law asks you to do
Rules7 min read

PAT testing home workshop: what the law asks you to do

The sticker on the drill ran out in March, and the quote for the shed prices every item with a plug, including the bench supply you use at the weekend

October 2026Read article
Stair cart or workshop trolley: pick the right route
Comparison7 min read

Stair cart or workshop trolley: pick the right route

The drill press is in the hall, and the only clear path runs up a flight. Stair cart or workshop trolley is the choice that path forces. A stair cart

October 2026Read article
Switching power supply ripple hobby: when it matters
Diagnosis7 min read

Switching power supply ripple hobby: when it matters

The scope is already on the output, and the trace is a thick band rather than a hairline. Switching power supply ripple hobby work usually starts ther

October 2026Read article
Bench power supply UK plug: check the BS 1363 lead
Rules7 min read

Bench power supply UK plug: check the BS 1363 lead

The part that decides whether you switch on is the plug in your hand. A bench power supply UK plug for a domestic 13 A socket should be a BS 1363 thre

October 2026Read article
Workshop press safety UK: when to leave it off
Rules7 min read

Workshop press safety UK: when to leave it off

The ram is already down, one bed pin is only halfway into the upright, and your hand is still on the bush. Workshop press safety UK is the decision to

October 2026Read article
Wood lathe chuck safety UK: checks before you start
Maintenance7 min read

Wood lathe chuck safety UK: checks before you start

The blank is in the jaws, the chuck key is still in the square, and a sleeve is close enough to flick the scroll. The switch is the next habit, and it

October 2026Read article