Independent comparisons. We may earn from shop links. More info

Best torque screwdriver

Updated: October 2026

You are looking at eleven amazon.co.uk listings between £26.24 and £183.50, and the stars do not say which handle matches the screw. The best torque screwdriver on this shelf is the insulated set that prints a window, a percentage and a certificate. The best value is the cheap bit set that prints a percentage. The full table is on the [torque screwdriver comparison](/hub/hand-tools/torque-screwdriver). The Products Compared editorial team read these listings and the UK review notes on 16 October 2026. Nobody here put the tools on a torque bench. If you buy through our links, a qualifying purchase can earn a commission at no extra cost to you.

You are looking at eleven amazon.co.uk listings between £26.24 and £183.50, and the stars do not say which handle matches the screw.

Our top picks

Draper Draper XP1000 9-piece VDE

Best overall

Draper Draper XP1000 9-piece VDE
9.4/10about £74.50
View offer
GROWNEER GROWNEER digital 0.3–6 Nm

Alternative

GROWNEER GROWNEER digital 0.3–6 Nm
8.0/10about £65.99
View offer
Awang Awang 1–6 Nm 36-piece

Preis-Tipp

Awang Awang 1–6 Nm 36-piece
8.1/10about £28.79
View offer
On this page
  1. 1.Top pick for a printed insulated window
  2. 2.Best value when the screw is not live
  3. 3.Who should skip the other nine
  4. 4.What this page will not call best

Top pick for a printed insulated window

The top pick is the Draper XP1000 nine-piece, model 65372, at £74.50 with 4.6 from 405 reviews. The bullet prints 1.0–5.0 Nm and ±6%. The title carries VDE, the listing cites a 10,000 V test, and a calibration certificate is named in the box. Draper’s own page agrees with that line. That is the maker repeating the claim, not a measurement by this desk. Skip it if the blade is missing from this nine-piece list, if the figure is above 5.0 Nm, or if you cannot accept a certificate that UK reviews often say arrived already old. Terminals are on the torque screwdriver for electricians page.

Best value when the screw is not live

The best value is the Awang 36-piece at £28.79 with 4.5 from 121 reviews. The bullet prints 1–6 Nm and ±3%, with 30 bits and five sockets. That percentage is a listing claim, not a UKAS certificate, and there is no VDE line. If the screw is a scope ring or a stem bolt inside 1–6 Nm, this is the row. How to choose a window is in the buying guide.
Draper Draper XP1000 9-piece VDE

Testsieger

Draper Draper XP1000 9-piece VDE
9.4/10about £74.50
View offer

Who should skip the other nine

The Wera 7441 at £116.49 is a handle at 1.2–3.0 Nm, blades not in the box. A bare bit removes the insulation, and the plastic setting ring has cracked in more than one UK review. Armeg at £183.50 names IEC 60900 and does not print a newton-metre window. Many UK reviews report a blade snapping around 2–3.5 Nm. Draper 81762 at £91.90 has VDE in the title and no range in the bullets. Both Aurlloct listings say 1–8 Nm in the bullets and 1.5 newton metres in the item-torque field. GROWNEER at £65.99 prints 0.3–6 Nm and ±2%. It is the pick only under 1 Nm, or when you want a screen and a tone.

What this page will not call best

±2%, ±3% and ±6% are lines on listings, not a measurement by this desk. Wiha, Norbar, FIRSTINFO and a Wera 7442 are not rows in this eleven. Best value here means the row that prints a percentage at £28.79. An insulated terminal inside 1.0–5.0 Nm points at Draper 65372. A household screw inside 1–6 Nm points at the Awang. A wheel nut is not on this shelf. Wheel nuts are on torque screwdriver vs torque wrench.

Common questions

Which listing is the top pick, and who should skip it?
Draper 65372, the XP1000 nine-piece at £74.50, is the top pick because the bullet prints 1.0–5.0 Nm, ±6% and a 10,000 V test, and the box list names a certificate. Skip it if you need a blade this set does not list, if the figure is above 5.0 Nm, or if you cannot accept a certificate that UK reviews often say arrived already old. It is not a claim that we measured it as the most accurate.
Which listing is the best value, and who should skip it?
The Awang at £28.79 is the best value. It prints 1–6 Nm and ±3%, with 4.5 from 121 reviews. Skip it for live terminals and for any joint that needs a UKAS certificate. BINGCOBBER is cheaper at £26.24 and prints no percentage, so the extra couple of pounds is what you are paying for a stated tolerance, not for insulation.
Why is the dearest set not the top pick?
Armeg at £183.50 names IEC 60900 on the amazon listing and does not print a newton-metre window there. Many UK reviews describe a blade snapping at low settings. Price and a standards line do not replace a window you can read before you order, and they do not outweigh those blade complaints if you are buying to avoid soft tips.
Is the Wera handle a complete set?
No. The 7441 at £116.49 is the handle, 1.2–3.0 Nm, and the blades are extra. A bare bit in that handle is not an insulated blade. It suits someone who already owns the matching Kraftform Kompakt VDE blades and whose screw sits inside 1.2–3.0 Nm. It is the wrong buy as a first kit, or for a figure above 3.0 Nm.
What is wrong with the 19-piece Draper if the stars are 4.6?
Draper 81762 has 4.6 from 260 reviews and VDE in the title, and the bullets do not state a newton-metre range. You cannot set a figure the page does not print. Reviews also mention old certificates, a tight tool roll, and blades or a pin that failed. The stars describe satisfaction. They do not fill in the missing window.
When is the digital GROWNEER the one to buy?
When the figure is under 1 Nm, or when you want the value on a screen and a buzzer as you approach it. It prints 0.3–6 Nm and ±2% at £65.99. It does not claim VDE. One UK review says it does not stop at the setting, so treat the tone as a signal and still stop your hand. Skip it for a consumer unit.

Related pages

Torque screwdrivers for small screws

Torque screwdrivers 2026

Torque screwdriver buying guide: Nm window and tip

Torque screwdriver for electricians: terminals and Nm

How to use a torque screwdriver: set, stop and store

Torque screwdriver vs torque wrench: which one fits

Sources

Public UK sources and the amazon.co.uk listings in this comparison. Page updated October 2026.

  1. Heamar: torque screwdrivers (retrieved 16 October 2026)
  2. Advanced Witness Systems: how often to calibrate (retrieved 16 October 2026)
  3. Lambda Calibration: torque calibration (retrieved 16 October 2026)
  4. Electricity at Work Regulations 1989, regulation 14 (retrieved 16 October 2026)
  5. Professional Electrician: insulated hand tools (retrieved 16 October 2026)
  6. IET: consumer units and protective devices (retrieved 16 October 2026)
  7. Electrical Safety First, Q1.21 (retrieved 16 October 2026)
  8. Park Tool: threadless stem (retrieved 16 October 2026)