Independent comparisons. We may earn from shop links. More info

Best anvil UK: the right listing for the job you do

Updated: 22 October 2026

You are comparing anvils on amazon.co.uk, and the prices in this set run from £9.85 to £99.99. The listing with the most stars is not the heaviest, and the one with the most reviews is not a smith’s anvil. A best anvil UK shopper can defend here is always best for a stated job. UK forging guides talk about anvils from about 50 kg upward, and nothing here reaches that. The twelve listings sit together on the [anvil comparison](/hub/hand-tools/anvil). Peter F. used those UK listings and the review text saved with them. We did not run a lab hardness test. A qualifying purchase can earn a commission at no extra cost to you.

You are comparing anvils on amazon.co.uk, and the prices in this set run from £9.85 to £99.99. The listing with the most stars is not the heaviest, and the one with the most reviews is not a smith’s anvil.

Our top picks

VEVOR VEVOR 4 kg cast steel horn anvil

Best overall

VEVOR VEVOR 4 kg cast steel horn anvil
7.7/10about £18.90
View offer
Beadsmith Beadsmith miniature horn anvil

Rank 2

Beadsmith Beadsmith miniature horn anvil
8.6/10about £16.99
View offer
Happybuy Happybuy 10 kg horn anvil

Alternative

Happybuy Happybuy 10 kg horn anvil
8.1/10about £29.90
View offer
On this page
  1. 1.Best for jewellery and stamping
  2. 2.Best listed cast-steel bench anvil in this set
  3. 3.The listing with the most reviews
  4. 4.Heaviest in the sample, and what they are not
  5. 5.Leave these if the job is regular forging

Best for jewellery and stamping

For findings, wire and light rivets, the Beadsmith at £16.99 is the jewellery pick, provided you will screw it down. It weighs 400 g, claims stainless steel and a dual horn, and shows 4.6 from 452 ratings. UK reviews describe findings and wire. At that weight a loose horn skates. The QWORK at £9.85 is the cheaper chrome block, at 557 g, and UK reviews report scratches. HimaPro at £23.99 is the heavier flat slab, with no UK review text in the file. Leave all three for hot forging. That split is on the anvil for jewellery making page.

Best listed cast-steel bench anvil in this set

The VEVOR 4 kg is the small bench anvil whose details say cast steel, at £18.90 with 4.7 from 184 ratings on 19 October 2026. It claims 50 HRC, which we did not test. The face is 132 × 68 mm. The VEVOR 10 kg at £34.90 prints a 16 mm square hole and a 9.5 mm round hole. A 16 mm square will not take a 25 mm hardy, and London style is not a London-pattern forging anvil. The Draper is grey cast iron at 4.5 kg and £36.56, so it costs more than that cast-steel 4 kg anvil.
VEVOR VEVOR 4 kg cast steel horn anvil

Testsieger

VEVOR VEVOR 4 kg cast steel horn anvil
7.7/10about £18.90
View offer

The listing with the most reviews

Happybuy shows 4.5 from 1,030 ratings at £29.90, more feedback than any other listing here. The bullets call it drop-forged steel and state 10 kg. The item-weight field reads 8.62 kg. A large review count is not a hardness test. The Consumer Rights Act 2015 expects satisfactory quality in light of the description, so a 10 kg bullet is a claim you can weigh. The VEVOR 10 kg prints 16 mm. Happybuy does not.

Heaviest in the sample, and what they are not

The heaviest here are the VEVOR at 24.9 kg for £49.90 and the AB Tools at about 25 kg for £99.99. Both sit near half the 50 kg a UK beginner guide treats as a starting point, and under the FAO line of at least 80 kg. The VEVOR title says steel, the material field says cast iron, and a bullet says drop-forged iron. The AB Tools has 4.3 from five ratings. A UK review reports a dented face where hot metal sat.

Leave these if the job is regular forging

If you forge most weekends, leave this sample. Forge Story points new smiths toward about 50 kg and away from cheap cast iron. KATSU and the Draper state cast iron plainly. The two smaller VEVOR anvils state cast steel, and their 50 HRC lines remain seller claims. The anvil buying guide walks through mass and metal without a winner’s order.

Common questions

Which listing is the best value for jewellery?
The Beadsmith at £16.99, if you will screw the 400 g horn to wood. UK reviews use it for findings and wire. The QWORK at £9.85 is cheaper if you accept a chrome face that marks. HimaPro at £23.99 is the heavier flat slab, and the file has no UK review text. None of the three is a hot-forging anvil.
Which is the strongest pick if I want cast steel and a printed hole size?
The VEVOR 10 kg at £34.90. The details say cast steel, and the page prints a 16 mm square hole and a 9.5 mm round hole. It scores 4.6 from 171 ratings. The VEVOR 4 kg is also cast steel, at £18.90, with a face of 132 × 68 mm. A 16 mm square will not take a 25 mm hardy. The 50 HRC figure is a seller claim, not a lab result.
Is the anvil with 1,030 reviews the one to buy?
Only when your job is a light bench anvil around £30. Happybuy’s 4.5 from 1,030 ratings at £29.90 is the largest set of ratings in this sample. The bullets say 10 kg and drop-forged steel, and the item weight says 8.62 kg. Stars do not measure face hardness. The VEVOR 10 kg states a 16 mm hole, and Happybuy does not.
Is the £99.99 anvil better because it costs more?
No. The AB Tools is the dearest listing here, at about 25 kg, with 4.3 from five ratings. A UK review reports a dented face and burnt paint. One bullet says steel, and there is no material field beside it. The VEVOR 24.9 kg at £49.90 still carries a steel title against a cast-iron material line. A higher price is not a hardness test.
What should I buy if I want to forge every weekend?
Not these listings. A UK beginner guide talks about anvils from about 50 kg, and the FAO forging note says at least 80 kg. This sample tops out near 25 kg, and the heavy pair still has conflicting material wording. A higher star rating on a 10 kg casting does not stand in for that mass.

Related pages

Cast steel vs cast iron

Anvil

Anvil buying guide: choose the job before the kilograms

Anvil for jewellery making: stamps, wire and rivets

How to mount an anvil so the face does not skate off

Sources

Public sources from the research digest. Shelf prices and star lines are the amazon.co.uk figures filed on 19 October 2026.

  1. HSE, Noise at work: advice for employers (retrieved 19 October 2026)
  2. Control of Noise at Work Regulations 2005 (retrieved 19 October 2026)
  3. GOV.UK, General Product Safety Regulations 2005 (retrieved 19 October 2026)
  4. Consumer Rights Act 2015, section 9 (retrieved 19 October 2026)
  5. anvilfire, Selecting an Anvil (retrieved 19 October 2026)
  6. beautifuliron, Anvils (retrieved 19 October 2026)
  7. Waterside Metal, How to buy a quality anvil (retrieved 19 October 2026)
  8. FAO, Blacksmithing tools: the anvil (retrieved 19 October 2026)