Independent comparisons. We may earn from shop links. More info

Stainless steel chimney cooker hoods compared 2026

The best stainless steel chimney hoods, compared.

Top pick: AEG DKB5660HM 60 cm pyramid chimney hood Best value: COMFEE' KWH-PYRA17SS-60 chimney hood – The lowest price in the set, at £69.99, with a stated 400 m³/h and a 4.4-star rating from 396 reviews for a straightforward ducted install. Updated October 2026.

Peter F.
Peter F.Editor

A stainless steel chimney cooker hood is a wall canopy with a telescopic cover. It is not a twin-wall flue, a rain cap or a barbecue chimney. If you are replacing a 60 cm hood, check whether you can duct outside at the stated outlet size, whether a carbon filter is in the box when you cannot, and whether the chimney still meets the ceiling after the hood sits at the right height above the hob. Listed airflow runs from 335 m³/h to 779 m³/h on the intensive setting. Those figures are catalogue claims, not an installed measurement, and several listings disagree with themselves on noise, airflow or box contents. In England, Approved Document F treats a hood that extracts outside and spans the cooker as a 30 litres per second extract. A recirculating hood on its own does not satisfy that extract rate. The [ducted or recirculating guide](/hub/grills-and-barbecues/stainless-steel-chimney/sub/stainless-steel-chimney-ducted-or-recirculating) is the page for that decision.

A stainless steel chimney cooker hood is a wall canopy with a telescopic cover. It is not a twin-wall flue, a rain cap or a barbecue chimney.

AEG DKB5660HM 60 cm pyramid chimney hood

Best overall

AEG DKB5660HM 60 cm pyramid chimney hood
8.3/10∼ £272

25 products checked · 61 hrs invested · +17,200 readers

7 of 7: Best stainless steel chimney hoods compared

Swipe for more

1-2 of 7
Best overall
AEG DKB5660HM 60 cm pyramid chimney hood
CIARRA CBCS6201 60 cm chimney hood
Best value
COMFEE' KWH-PYRA17SS-60 chimney hood
CIARRA CAS6201A 60 cm chimney hood
FIREGAS 60 cm touch chimney hood
COMFEE' 60M77 gesture chimney hood
SNDOAS 60 cm chimney hood
8.3/10
9.6/10
9.1/10
8.7/10
8.2/10
8.9/10
7.9/10
∼ £272
∼ £80
∼ £70
∼ £80
∼ £80
∼ £127
∼ £77
5.0(3)
4.4(12,710)
4.4(396)
4.3(1,605)
4.2(343)
4.2(209)
3.9(32)
View offer
View offer
View offer
View offer
View offer
View offer
View offer

The best stainless steel chimney hoods in detail

AEG DKB5660HM 60 cm pyramid chimney hood

Rank 1

AEG DKB5660HM 60 cm pyramid chimney hood

∼£272

Our view

The AEG DKB5660HM lists 175–352 m³/h on its normal settings and 779 m³/h on intensive, giving it the widest stated performance range in this group. Touch controls, three regular speeds, intensive mode and Breeze make it the most feature-rich option here, while the listing also claims Hob2Hood compatibility. Its 55 dB stated noise level is lower than several cheaper models in the comparison, although that figure is not an installed-kitchen measurement. The £272.00 price is far above the rest of the set, and the 5.0-star rating comes from only three reviews, so it carries much less review evidence than the CIARRA models. The box line names a ducting kit, but one review says the 150 mm pipe was missing, so you should check what is supplied before installation. The listing describes exhaust ventilation and does not state that a carbon filter is included, making this a better fit for a planned outside duct than an assumed recirculating installation.

Pros

  • Highest stated intensive airflow in the comparison
  • Touch controls with intensive and Breeze modes
  • Lower stated noise than several budget models
  • Two-year manufacturer warranty

Cons

  • By far the highest price in this set
  • Only three amazon.co.uk reviews
  • Carbon filter inclusion is not stated
  • One review reports that the 150 mm pipe was missing

Best for: A ducted 60 cm installation where intensive extraction, touch controls and the claimed Hob2Hood function justify the premium.

Less suitable: A budget kitchen or a recirculating installation where you need confirmed carbon filters in the box.

Specifications

Model
AEG DKB5660HM 60 cm pyramid chimney hood
Brand
AEG
Price
∼£272
Customer rating
5.0/5(3)
Listed airflow
175–779 m³/h
Stated noise
55 dB
Venting
Exhaust
Duct in listing
Kit listed
Speeds
3 + intensive
Controls
Touch
Lights
LED
Width
60 cm

Common questions

How many speeds does the AEG listing state?

The specification table says 3 speeds. The bullets also name an intensive mode and a Breeze function. Intensive is the setting listed at 779 m³/h.

Is a carbon filter listed in the box?

The listing does not name a carbon filter. The ventilation line says exhaust, so do not assume a recirculating install is ready from the box.

Does the listing prove the exhaust pipe is included?

The included-components line says a ducting kit. A UK review says the 150 mm pipe was not in the box. Check the parcel against that line before you fit it.

CIARRA CBCS6201 60 cm chimney hood

Rank 2

CIARRA CBCS6201 60 cm chimney hood

∼£80

Our view

The CIARRA CBCS6201 pairs a £79.99 price with a 4.4-star rating from 12,710 reviews, the strongest review base in this comparison. Its box list is also practical, naming carbon filters, grease filters, a 1.5 m exhaust pipe, two chimney extensions and a UK standard plug. Three push-button speeds keep operation simple, and the listing supports both evacuation and recycling. The airflow data needs careful reading because the title says 404 m³/h while the specification table says 370 m³/h; neither figure proves installed performance. The listed 60 dB noise is mid-pack rather than especially quiet, and the separate 425 mm item-width cell conflicts with the 60 cm dimension line. Even with those catalogue inconsistencies, its combination of price, supplied parts and extensive buyer feedback makes it our top pick in this seven-product set.

Pros

  • Largest review base in the comparison
  • Carbon filters and 1.5 m pipe listed in the box
  • UK standard plug explicitly listed
  • Low price for the supplied installation bundle
  • Two-year parts-and-labour warranty

Cons

  • Airflow figures conflict between title and table
  • Width fields are inconsistent
  • Push-button controls are basic

Best for: A value-conscious buyer who wants a well-reviewed 60 cm hood with ducting, carbon filters and a UK plug named in the box.

Less suitable: Someone wanting touch or gesture controls, or an installation that depends on one verified airflow figure.

Specifications

Model
CIARRA CBCS6201 60 cm chimney hood
Brand
CIARRA
Price
∼£80
Customer rating
4.4/5(12,710)
Listed airflow
370 or 404 m³/h
Stated noise
60 dB
Venting
Duct or recycle
Carbon filter
In the box
Duct in listing
1.5 m pipe
Chimney reach
2 × 40 cm
Speeds
3
Controls
Push button
Lights
LED
Width
60 cm

Common questions

Which airflow figure is on the listing?

The title says 404 m³/h. The specification table says 370 m³/h. Neither figure is an installed-kitchen measurement.

Is a UK plug listed?

Yes. The box list includes one UK standard plug. It is the only listing in this set that states that.

What width should you use?

The dimension line is 60 cm wide. A separate item-width cell says 425 mm. Treat that as a conflict, not as a single confirmed width.

COMFEE' KWH-PYRA17SS-60 chimney hood

Rank 3

COMFEE' KWH-PYRA17SS-60 chimney hood

∼£70

Our view

The COMFEE' KWH-PYRA17SS-60 is the cheapest hood in this set at £69.99 while listing 400 m³/h across three push-button speeds. A 4.4-star rating from 396 reviews gives it more evidence than the SNDOAS or AEG, although much less than the CIARRA CBCS6201. At 5.3 kg it is also the lightest listed model here, which may simplify handling during wall mounting without removing the need for suitable fixings. The specification table describes exhaust use, while the bullets say recirculation is possible if you buy a CF04 carbon filter separately. Its stated 67 dB is the highest single noise figure in this comparison, and neither a duct nor a UK plug is confirmed in the box details. For a straightforward ducted budget installation it is our best-value option, provided you allow for any missing duct parts.

Pros

  • Lowest price in the comparison
  • Solid 4.4-star rating from 396 reviews
  • Stated 400 m³/h airflow
  • Lightest listed weight in the set

Cons

  • Highest stated noise figure in the comparison
  • Carbon filter costs extra
  • Duct and UK plug are not stated

Best for: A simple, low-cost ducted installation where three speeds are enough and you can source any required duct parts separately.

Less suitable: A quiet open-plan kitchen or a recirculating setup where you want the carbon filter included.

Specifications

Model
COMFEE' KWH-PYRA17SS-60 chimney hood
Brand
COMFEE'
Price
∼£70
Customer rating
4.4/5(396)
Listed airflow
400 m³/h
Stated noise
67 dB
Venting
Exhaust
Carbon filter
Extra (CF04)
Speeds
3
Controls
Push button
Lights
LED
Width
60 cm

Common questions

Is a carbon filter included?

No. The bullets say recirculation needs a COMFEE' CF04 bought separately. The box line is the hood and a manual.

What voltage does the table give?

The specification table says 230 V and 65 W. That is the only listing in this set that prints 230 V.

Does the table allow recirculation?

The ventilation cell says exhaust. The bullets allow recirculation only with a CF04 carbon filter bought separately.

CIARRA CAS6201A 60 cm chimney hood

Rank 4

CIARRA CAS6201A 60 cm chimney hood

∼£80

Our view

The CIARRA CAS6201A lists 370 m³/h across three push-button speeds and costs £79.99. Its 4.3-star rating from 1,605 reviews gives it substantially more buyer evidence than most models here, though less than the related CBCS6201. A stated chimney range of 573–940 mm is useful when checking whether the cover will meet your ceiling at the required hob clearance. Carbon filters are not in the box list and CBCF002X2 is sold separately, so recirculation adds cost. The listing says a 1.5 m pipe is supplied in a bullet, but the included-components line omits it, and the manufacturer part-number field confusingly says CBCS6201. This is therefore a credible basic hood, but you should verify both the exact model and installation parts before ordering.

Pros

  • Large amazon.co.uk review base
  • Clearly stated 573–940 mm chimney range
  • Low £79.99 price
  • Suitable for evacuation or recycling according to the listing

Cons

  • Carbon filters cost extra
  • Pipe inclusion is inconsistent
  • Part-number field conflicts with the model name

Best for: A budget 60 cm installation where the stated chimney range matters and you are prepared to check or buy the required accessories.

Less suitable: A recirculating setup where you want carbon filters and every fitting confirmed in the box.

Specifications

Model
CIARRA CAS6201A 60 cm chimney hood
Brand
CIARRA
Price
∼£80
Customer rating
4.3/5(1,605)
Listed airflow
370 m³/h
Stated noise
62 dB
Venting
Duct or recycle
Carbon filter
Sold separately
Duct in listing
1.5 m claimed
Chimney reach
573–940 mm
Speeds
3
Controls
Push button
Lights
LED
Width
60 cm

Common questions

Are carbon filters in the box?

The bullet says CBCF002X2 is available separately. The included-components line lists the hood, a mounting kit and a manual.

Why does the part number look like the other CIARRA?

The model field says CAS6201A. The manufacturer part-number field says CBCS6201, which is the other CIARRA listing in this set. Confirm the model before you order.

How long is the chimney?

The bullet states a telescopic chimney of 573–940 mm. That is the clearest chimney range printed in this comparison.

FIREGAS 60 cm touch chimney hood

Rank 5

FIREGAS 60 cm touch chimney hood

∼£80

Our view

The FIREGAS hood costs £79.99 and combines three speeds with touch controls, making it one of the least expensive touch-operated models in this group. Its stated airflow is 335 m³/h, the lowest headline figure among the seven, though listing figures should not be treated as installed tests. Carbon filters are named in the box and the bullets describe both extraction and recirculation, which gives you flexibility at this price. A 4.2-star rating from 343 reviews provides a moderate evidence base, but only part of the collected review text was from UK buyers. Important listing details conflict: the table says 65 dB and exhaust, while a bullet says 54 dB and both modes; the 75 V and 900 W cells are too inconsistent to use. Choose it for controls and supplied filters, not for certainty about its electrical or acoustic specifications.

Pros

  • Touch controls at a budget price
  • Carbon filters listed in the box
  • Timer claimed in the listing
  • Both extraction and recirculation described in the bullets

Cons

  • Lowest stated airflow in this comparison
  • Noise figures conflict
  • Ventilation mode conflicts between table and bullets
  • Voltage and wattage data are unusable

Best for: A budget recirculating or ducted setup where touch controls and supplied carbon filters matter more than a high airflow claim.

Less suitable: A specification-led installation that requires confirmed electrical, noise or duct details before purchase.

Specifications

Model
FIREGAS 60 cm touch chimney hood
Brand
FIREGAS
Price
∼£80
Customer rating
4.2/5(343)
Listed airflow
335 m³/h
Stated noise
54 or 65 dB
Venting
Mode conflict
Carbon filter
In the box
Speeds
3
Controls
Touch
Lights
LED
Width
60 cm

Common questions

Which noise figure is on the listing?

The specification table says 65 dB. The bullet says 54 dB. Both stay visible because the listing does not reconcile them.

Can the 75 V and 900 W cells be used?

No. They conflict with the 1.5 W LED bullet. Voltage and wattage are not usable from this listing.

Are carbon filters listed in the box?

Yes. The included-components line names carbon filters, along with the hood, a chimney bracket, instructions and screws.

COMFEE' 60M77 gesture chimney hood

Rank 6

COMFEE' 60M77 gesture chimney hood

∼£127

Our view

The COMFEE' 60M77 combines a stated 650 m³/h airflow with four speeds, touch controls and gesture control, so it offers more control options than the push-button hoods in this set. At £126.98, it sits between the budget models and the much dearer AEG. The included-components line names a CF06 or CF03 carbon filter, which reduces the extra shopping needed for recirculation. Its 4.2-star rating is based on 209 reviews, a useful sample but much smaller than the review base behind the CIARRA CBCS6201. The listing is not fully consistent: the bullets describe ducted and recirculating use, while the specification table says recirculation, and a review mentions a 6-inch foil duct that the box list does not name. The stated 59 dB noise level is competitive within this group, but neither airflow nor noise is an installed-kitchen test.

Pros

  • High stated airflow for the price band
  • Four speeds with touch and gesture control
  • Carbon filter named in the box
  • Stated 59 dB noise level

Cons

  • Ducted-versus-recirculating details conflict
  • Duct is mentioned in a review but not the components line
  • Costs substantially more than the basic push-button models

Best for: A 60 cm kitchen where you want gesture control, four speeds and a carbon filter supplied for a possible recirculating setup.

Less suitable: A buyer who needs an unambiguous ducted box list or only wants a low-cost three-speed hood.

Specifications

Model
COMFEE' 60M77 gesture chimney hood
Brand
COMFEE'
Price
∼£127
Customer rating
4.2/5(209)
Listed airflow
650 m³/h
Stated noise
59 dB
Venting
Both; table differs
Carbon filter
CF06 or CF03
Chimney reach
485–820 mm
Speeds
4
Controls
Touch and gesture
Lights
Halogen
Width
60 cm

Common questions

Can this hood be ducted and recirculated?

The bullets say both ducted and recirculating use. The specification table says recirculation. Both lines are on the listing, so the mode is not settled by one field.

How far does the chimney adjust?

The bullet states 485 mm to 820 mm. Measure that against your ceiling after you allow hob clearance.

What light type does the table give?

The specification table says halogen. The other hoods in this set list LED.

SNDOAS 60 cm chimney hood

Rank 7

SNDOAS 60 cm chimney hood

∼£77

Our view

The SNDOAS hood gives you a stated 450 m³/h, three push-button speeds and a £76.90 price. Its box list is unusually complete for this group, naming two YYCF-55E carbon filters and a 2 m, 150 mm foil tube as well as the chimney sections. That makes the listing practical for someone who wants either mode without immediately sourcing filters, although rigid ducting may still be preferable for a longer outside run. The 3.9-star rating from 32 reviews is the weakest rating and one of the smallest evidence bases in the comparison. Reviews also raise concerns about the short chimney, and the listing specifies two 300 mm sections, so ceiling reach needs checking before you buy. Noise is stated at 65 dB, placing it towards the louder end of these listed figures, while the presence of a UK plug is not stated.

Pros

  • Low purchase price
  • Two carbon filters included
  • 2 m, 150 mm foil duct included
  • Convertible between ducted and recirculating use

Cons

  • Lowest star rating in the set
  • Only 32 reviews
  • Reviews report that the chimney sections can be short
  • UK plug is not stated

Best for: A lower-cost installation where the included 150 mm duct and carbon filters are useful and the stated chimney reach fits.

Less suitable: A tall ceiling, a noise-sensitive open-plan room or anyone prioritising extensive review evidence.

Specifications

Model
SNDOAS 60 cm chimney hood
Brand
SNDOAS
Price
∼£77
Customer rating
3.9/5(32)
Listed airflow
450 m³/h
Stated noise
65 dB
Venting
Convertible
Carbon filter
2 in the box
Duct in listing
2 m, 150 mm
Chimney reach
2 × 300 mm
Speeds
3
Controls
Push button
Lights
LED
Width
60 cm

Common questions

What duct does the box list?

A 2 m aluminium foil tube at 150 mm, plus two carbon filters YYCF-55E. Rigid duct may still be preferable for a longer outside run.

What wattage does the table give?

55 W. The chimney is listed as two 300 mm sections, so check ceiling reach before you order.

Is a UK plug named?

The listing does not state a UK plug. UK plugs are BS 1363, and a fused spur is an electrician’s job.

How we compared

The scores compare only the seven amazon.co.uk listings kept for this category. They are editorial comparison scores, not laboratory results. The star rating and review count stay labelled separately as the amazon.co.uk figures.

1

Amazon rating and review confidence

35%

The star rating contributes up to 25 points and review volume up to 10, with diminishing returns so a long catalogue history does not crowd out the other factors.

2

Extraction and everyday controls

20%

Stated airflow, speed selection, controls and useful modes. Listing figures are claims, not installed measurements.

3

Installation readiness

20%

Credit for a clearly listed duct, carbon filters, chimney range, UK plug details and warranty information.

4

Price and value

20%

Price is judged against the supplied equipment and features in this seven-product set, not against the whole UK market.

5

Listing clarity

5%

Consistent dimensions, mode, noise and box contents score better than contradictory catalogue fields.

Independent review
Last updated: October 2026
8 sources checked

Stainless steel chimney hood buying guide

Use this section to decide mode, width and chimney reach before you sort the seven hoods by price. The table ranks amazon.co.uk listings. It does not measure installed airflow, and it does not treat a printed energy class as verified. Ducted replacements, flats that must recirculate, and households paying for a Hob2Hood claim need different box contents.

What a stainless steel chimney hood has to clear

A stainless steel chimney cooker hood is a wall canopy plus a telescopic decorative chimney. Integrated visors, downdraft, ceiling and island chimneys are other types and are not in this table. The split inside the seven listings is ducted, recirculating or convertible, and push-button versus touch or gesture. The AEG also lists an intensive speed, up to 779 m³/h, and a normal band of 175–352 m³/h. Duct to outside if the wall and the outlet allow it.

Best for

  • Cooks replacing a ducted 60 cm hood and matching the old outlet and chimney height
  • Flats that cannot core a wall and need a carbon filter named in the box

Not ideal for

  • A 90 cm range cooker, which is wider than every hood kept in this set
  • Anyone treating these listings as a flue liner, a HETAS terminal or a barbecue chimney

Mistakes to avoid

  1. 1

    Buying the largest m³/h, then reducing the duct

    A reducer from 150 mm to 100 mm is not a free way to keep the listed airflow. Caple’s guide says reducers cut performance on its extractors. Read the outlet the listing actually states.

  2. 2

    Assuming carbon filters are in every box

    They are named for the CBCS6201, the gesture COMFEE', the SNDOAS and the FIREGAS. The CAS6201A and the pyramid COMFEE' sell them separately. The AEG listing does not name one.

  3. 3

    Treating three reviews as 12,710 reviews

    The AEG’s 5.0-star line is three amazon.co.uk reviews. The CBCS6201’s 4.4 is from 12,710. A high intensive airflow figure does not close that gap, and chimney length still has to be measured.

What to weigh up

Mode, outlet and the building

High

Start with the wall, not the fan curve. If you can duct outside, match the stated outlet. The SNDOAS lists a 2 m, 150 mm foil tube. The CBCS6201 lists a 1.5 m pipe without a diameter in the components line. UK reviews on CIARRA and FIREGAS mention 150 mm, which is not the same as a diameter printed in every box list. Recirculation is the fallback when you cannot core a wall. It needs a carbon filter, and Approved Document F still does not treat a recirculating hood alone as the kitchen extract.

Chimney reach, noise and controls

High

A hood that cannot meet the ceiling after hob clearance is the wrong hood, whatever the airflow claim. The CAS6201A prints 573–940 mm. The gesture COMFEE' prints 485–820 mm. The CBCS6201 prints two 40 cm extensions. The SNDOAS prints two 300 mm sections, and reviews say that can be short. The AEG, pyramid COMFEE' and FIREGAS do not state a range. Stated noise runs from 55 dB to 67 dB, with the FIREGAS bullet and table in conflict at 54 dB and 65 dB. Push-button hoods are the majority.

Which option suits you?

Three typical situations, each with a recommendation from this comparison.

Replacing a ducted 60 cm hood

You are matching an outside-wall duct and the chimney height you already have. The CIARRA CBCS6201 lists a 1.5 m pipe, carbon filters, two chimney extensions and a UK standard plug, with a 4.4-star rating from 12,710 reviews. Check the title airflow of 404 m³/h against the table figure of 370 m³/h before you order.

Flat with no new wall core

You cannot duct outside, so the box needs a named carbon filter, and you still need another way to remove moisture. The gesture COMFEE' lists a CF06 or CF03 filter and a stated 650 m³/h. Its bullets say ducted and recirculating use, while the specification table says recirculation.

Compatible AEG hob

You want the Hob2Hood claim and are paying £272.00 for the AEG DKB5660HM. The listing pairs that claim with touch controls and an intensive figure of 779 m³/h. The 5.0-star line is only three amazon.co.uk reviews, and a carbon filter is not named in the box.

Common questions about stainless steel chimney hoods

Which stainless steel chimney hood is the top pick?
The CIARRA CBCS6201 is the top pick in this set of seven. It costs £79.99 and has a 4.4-star rating from 12,710 amazon.co.uk reviews, the largest review base here. The box list names carbon filters, a 1.5 m exhaust pipe, two chimney extensions and a UK standard plug. The title says 404 m³/h and the specification table says 370 m³/h, so use both figures and do not treat either as an installed test. Choose it when the listed parts and the review record matter together.
Which hood is the best value?
The COMFEE' KWH-PYRA17SS-60 is the best value. It is the lowest price here at £69.99, with a stated 400 m³/h across three push-button speeds and a 4.4-star rating from 396 reviews. The specification table describes exhaust use. Recirculation needs a CF04 carbon filter bought separately, and the stated noise is 67 dB, the highest single figure in the set. It fits a simple ducted installation if you can source any duct parts the box does not name.
Should a stainless steel chimney hood duct outside or recirculate?
Duct outside if you can. In England, Approved Document F sets 30 litres per second when a cooker hood extracts outside and spans the cooker, and 60 litres per second if it does not. A recirculating hood on its own is not that extract, and it does not remove moisture. Wales, Scotland and Northern Ireland use their own guidance. Carbon filters are named in the box on the CBCS6201, the gesture COMFEE', the SNDOAS and the FIREGAS. They cost extra on the CAS6201A and the pyramid COMFEE'.
How wide should the hood be compared with the hob?
Which? and Bosch UK say the hood should be at least as wide as the hob. Every listing kept here is a 60 cm class hood, so a 90 cm range cooker sits outside this set. Match the width to the hob you already have, not to the highest airflow claim. Steam that misses the canopy is a height and width problem as well as a fan problem. Measure the hob before you treat a 60 cm canopy as a full cover.
How high above the hob should the hood sit?
None of the seven amazon.co.uk listings states a clearance. If the manufacturer is silent, Approved Document F says 650–750 mm above the hob. Hotpoint’s general line is 750 mm above gas and 650 mm above electric. Bosch’s chimney page says at least 500 mm above induction and 650 mm above gas for the hoods that page describes. AEG’s UK page for the DKB5660HM states 50 cm above electric and 65 cm above gas. Follow the manual for the hood you buy. Call a professional if gas clearances clash between manuals.
What should you check in the box before fitting?
Do not assume every hood includes a carbon filter, a duct and a UK plug. Only the CIARRA CBCS6201 box list states a UK standard plug, plus carbon filters and a 1.5 m pipe. The SNDOAS lists a 2 m, 150 mm foil tube and two carbon filters. The CAS6201A bullet mentions a 1.5 m pipe, but the components line omits it, and CBCF002X2 is sold separately. One AEG review says the 150 mm pipe was missing even though a ducting kit is named.
Is a stainless steel chimney hood the same as a barbecue chimney?
No. In this comparison a stainless steel chimney is a wall cooker hood with a decorative telescopic cover. It is not a twin-wall flue, a rain cap, a flue liner or a HETAS terminal. BS EN 1856-1 covers metal system chimneys, not these hoods. A metal vent cover is a different product. That comparison is the ventilation grille page. Do not order one of these ASINs as a garden-flue part.
Why do the noise and airflow figures disagree?
Several listings print two figures and do not reconcile them. The FIREGAS bullet says 54 dB and its table says 65 dB. The CBCS6201 title says 404 m³/h and its table says 370 m³/h. The AEG lists 175–352 m³/h on normal settings and 779 m³/h on intensive. Table noise runs from 55 dB on the AEG to 67 dB on the pyramid COMFEE'. These are catalogue claims, not an installed measurement. Do not assume a reducer from 150 mm to 100 mm keeps the listed airflow.

Our verdict

Seven 60 cm stainless steel chimney hoods run from £69.99 to £272.00. The top pick is the CIARRA CBCS6201: £79.99, a 4.4-star rating from 12,710 reviews, and a box list that names carbon filters, a 1.5 m pipe and a UK standard plug. The title and the table disagree on airflow, at 404 m³/h and 370 m³/h. The best value is the COMFEE' KWH-PYRA17SS-60 at £69.99, with a stated 400 m³/h and 396 reviews, if you can duct outside and buy a CF04 filter only if you recirculate. None of these scores is a lab test.

Best overall
AEG DKB5660HM 60 cm pyramid chimney hood

AEG DKB5660HM 60 cm pyramid chimney hood

View offer
Best value
COMFEE' KWH-PYRA17SS-60 chimney hood

COMFEE' KWH-PYRA17SS-60 chimney hood

The lowest price in the set, at £69.99, with a stated 400 m³/h and a 4.4-star rating from 396 reviews for a straightforward ducted install.

View offer

Editorial

Peter F. - Editor
Editor
Grills and barbecuesstainless steel chimneyDIY & tools

Peter F. is the editor for DIY & tools at productscompared.co.uk. Comparisons in this category are checked against amazon.co.uk listings, review evidence and public UK sources.

Updated: October 2026
8 sources checked

Guides to stainless steel chimney hoods

Guides on what to look for, how to use a product, and common mistakes.

Related comparisons

Sources

Prices, star ratings and review counts are the amazon.co.uk listing figures used for this comparison. The public sources below are the ones named for the rules, clearances and filter points.

  1. GOV.UK: Approved Document F, Volume 1 (retrieved 16 October 2026)
  2. Which?: how to buy the best cooker hood (retrieved 16 October 2026)
  3. Bosch UK: chimney hood tips (retrieved 16 October 2026)
  4. AEG UK: DKB5660HM cooker hood (retrieved 16 October 2026)
  5. Hotpoint UK: height above a hob (retrieved 16 October 2026)
  6. Appliances Direct: cooker hoods buying guide (retrieved 16 October 2026)
  7. Caple: extraction guide (retrieved 16 October 2026)
  8. BFCMA: chimneys and flues (retrieved 16 October 2026)

This article contains affiliate links. If you buy through these links, we may earn a commission at no extra cost to you. The comparison uses amazon.co.uk listings and public UK sources. It is not a lab test, and it does not promise the cheapest price.