Independent comparisons. We may earn from shop links. More info

Best metal adhesive

Updated: 23 October 2026

You want one name for a hole in a steel bracket, a close metal fit, a joint that must flex indoors, or a bolt that rattles. There is no strongest glue in this amazon.co.uk set. Each listing fits one job, and the wrong one fails even with a high star line. The full table is on the [metal adhesive comparison](/hub/fillers-adhesives-and-sprays/metal-adhesive). This page is the short verdict: who each pack is for, and who should skip it. Prices are the shelf prices recorded for this comparison. A qualifying purchase through our amazon.co.uk links can earn us a commission at no extra cost to you.

You want one name for a hole in a steel bracket, a close metal fit, a joint that must flex indoors, or a bolt that rattles. There is no strongest glue in this amazon.co.uk set.

Our top picks

Vigorder Vigorder blue threadlocker 50 ml

Best overall

Vigorder Vigorder blue threadlocker 50 ml
7.9/10about £7.99
View offer
J-B Weld J-B Weld SteelStik 57 g

Rank 2

J-B Weld J-B Weld SteelStik 57 g
9.6/10about £6.79
View offer
FresFresi FresFresi E-8000, 3 x 15 ml

Best value

FresFresi FresFresi E-8000, 3 x 15 ml
6.8/10about £4.89
View offer
On this page
  1. 1.Best depends on the job
  2. 2.Putty when metal is missing
  3. 3.Close fit, flexing joint, or a rattling bolt
  4. 4.Stars and the cheapest tube

Best depends on the job

Expert Reviews names Gorilla Epoxy around £6, Araldite Rapid around £6.56, a 5 g Loctite super glue around £1.70, and UniBond No More Nails around £4.50, and it states that super glue cannot fill cracks. That frame does not say which of these six listings to skip. A hole wants mouldable putty. A hairline you can hold wants cyanoacrylate, once you have read the listing conflicts. An indoor joint that must flex and keep water out wants the hybrid cartridge. A rattling metal fastener wants threadlocker. If you still need the decision tree, use the metal adhesive buying guide. This verdict keeps the £6.79 and 16,076 recorded for SteelStik.

Putty when metal is missing

J-B Weld SteelStik 8267UK is the top pick when metal is missing and you can shape a repair. It is a 57 g epoxy putty at about £6.79, with 4.5 from 16,076 reviews, the largest sample in the set. UK reviewers knead it into rust holes and then sand or drill it. Cut, knead to one colour, and press firmly. The set is about 3 to 5 minutes and the cure is 1 hour. The 4,000 PSI figure is the tensile rating of the cured putty, and the continuous heat figure is about 177°C. That is not your joint, and it is not an exhaust repair. Skip it for a thread, a hairline you can clamp, or anything that flexes.
Vigorder Vigorder blue threadlocker 50 ml

Testsieger

Vigorder Vigorder blue threadlocker 50 ml
7.9/10about £7.99
View offer

Close fit, flexing joint, or a rattling bolt

LAWEZX at about £7.58 is the cyanoacrylate for a small tight bond you can hold, 4.6 from 616 reviews, with a 45-second bullet and a 24-hour full cure. Skip it unless you accept the conflict: the title names metal and the compatible-material field says plastic. One UK review needed an activation spray for metal to wood that is not in the pack. Skip it across a gap you can see, and skip JOYAONE at about £9.49, where several UK texts say it stayed tacky. Sika Stixall Crystal Clear at about £7.46 is the indoor flex-and-seal cartridge, full cure 7 days, −40°C to +70°C. Skip this colour outdoors. Vigorder’s 50 ml bottle at about £7.99 is the listing for metal threads. Skip plastic threads, and do not read it as LOCTITE 243. Blue is not a British Standard.

Stars and the cheapest tube

A 4.8 on 22 reviews is not the same evidence as 4.5 on 16,076. Vigorder can be the right pick for a clean metal thread and a poor reason to call it the best metal adhesive in the set. SteelStik is the top pick for a hole because the method weights that review count, not because putty wins every job. FresFresi E-8000 at about £4.89 is the best value on the comparison rule: the lowest price at 4.0 or above that is not the top pick. It is a craft gel. Skip it for a hole in steel.

Common questions

What is the best metal adhesive in this set?
There is no single winner. SteelStik at about £6.79 is the top pick for a hole or a rebuild you can file, because 4.5 from 16,076 reviews is the strongest evidence here and the format matches missing metal. A bolt, a close fit, and an indoor flexing joint each have a different listing. Using the putty on a thread wastes both.
Is the £4.89 gel the best value for steel?
It is the best value on the rule used for this comparison: lowest price at 4.0 or above that is not the top pick. It is not the best value for a steel hole. FresFresi lists metal among many craft substrates, has 51 reviews, and prints no heat figure. For a bracket you will file and load, SteelStik is the closer match, at about £6.79.
Why is a 4.8-star bottle not the top pick?
Vigorder is 4.8 from 22 reviews. SteelStik is 4.5 from 16,076. A high average on a small sample is a weaker base for a general pick, and the bottle is a threadlocker, not a hole filler. It can still be the right buy when the only job is a clean metal bolt you may need to undo.
Can I use the top pick on an exhaust?
Do not. The maker figure used here is about 177°C continuous for the cured putty, and an exhaust runs hotter than that band. An exhaust line on the amazon.co.uk description is not a clearance. Heat, gas, and pressurised joints belong with a professional, not with a 57 g stick.
Who should skip the £9.49 brush bottle?
Skip JOYAONE if the joint has to hold. Twelve reviews average 3.0, and several UK texts say the glue stayed tacky. The brush is liked for small model work. There is no cure time and no water rating on the listing. At the highest price in the set, that is a test on scrap, not a repair you depend on.
Best if the joint must flex and keep water out indoors?
Stixall Crystal Clear at about £7.46, if you can wait seven days and you have a sealant gun. The listing names metals, claims waterproof, and states −40°C to +70°C. Skip this colour outside, because the bullet says it is not for exterior use. It will not lock a thread and it is not a putty rebuild.

Related pages

How to use metal adhesive

Epoxy or super glue for metal

Threadlocker for metal bolts

Metal adhesive

Metal adhesive buying guide before you compare stars

Sources

Public UK sources used for this comparison. amazon.co.uk prices, stars and review counts are from the listings for the six ASINs in this set.

  1. HSE SR22, solvent-based adhesives (retrieved October 2026)
  2. EUH202, cyanoacrylate label sentence (retrieved October 2026)
  3. UK REACH diisocyanate restriction (retrieved October 2026)
  4. Henkel UK, LOCTITE 243 (retrieved October 2026)
  5. J-B Weld SteelStik (retrieved October 2026)
  6. Sika Stixall Crystal Clear product data sheet (retrieved October 2026)
  7. Expert Reviews, best glue for metal (retrieved October 2026)
  8. Loctite consumer UK, how to glue metal to metal (retrieved October 2026)