Independent comparisons. We may earn from shop links. More info

Washing machine anti-vibration pads: what they fix

Updated: October 2026

Washing machine anti vibration pads can help when a level appliance transmits modest spin vibration into the floor, but they are not a repair for a machine that bangs or walks violently. The first distinction is between movement of the cabinet, vibration carried through the building and ordinary airborne noise. A rubber sheet or four squares may alter the first two without making the wash silent. Our [anti-vibration pads comparison](/hub/tool-accessories/anti-vibration-pads) shows the forms and dimensions in this amazon.co.uk batch. A qualifying purchase can earn a commission at no extra cost to you.

Washing machine anti vibration pads can help when a level appliance transmits modest spin vibration into the floor, but they are not a repair for a machine that bangs or walks violently.

Our top picks

On this page

What pads can change beneath a washer

A resilient pad sits between the machine and floor, so it may reduce some structure-borne vibration when it remains beneath the load. Loxley reviewers describe quieter results on timber floors, but not silence. Motor, pump and water noise still exist after the contact path changes. Pads can also change grip. The Zestecho reviews show the risk: one buyer says bouncing stopped but the washer then slid, and another says walking on LVT was reduced rather than eliminated. Do not start with pads on a newly installed washer until its transit bolts and base packing are removed. Level all four feet and secure the lock nuts. The fitting guide gives that order in full. If a small floor-transmission problem remains, pads become a reasonable trial.

Timber floors and smooth floors behave differently

Suspended timber floors can flex with the rotating load. UK Whitegoods notes that anti-vibration feet may lessen the effect but are unlikely to cure the floor itself. Bosch UK suggests a water-resistant board at least 30 mm thick across suitable floor beams. That is structural support, not a thicker rubber accessory. A full sheet may spread support, but a soft layer can still allow feet to sink. One shared LouMaxx review says appliance feet wore through the pad. Smooth tile or LVT can be stiff and still let a pad slide during spin. A PP and TPU cup such as YuhooTech may locate the foot, but fit and suction are surface-specific. A cabinet rocking at rest points to levelling. A stable cabinet that drums through floorboards points towards transmission. A washer travelling across a smooth floor needs grip and a check of the machine, not a promise of noise reduction.
Loxley Loxley Benedict 60 cm mat

Testsieger

Loxley Loxley Benedict 60 cm mat
8.2/10about £27.99

What buyers in this batch reported

The Loxley Benedict is a 60 × 60 × 8 mm recycled-rubber sheet. Its 4.3 from 223 reviews includes quieter floorboard reports, although one buyer could not fit the full mat under a worktop. At £27.99 it costs much more than four squares and still cannot promise silence. FUX supplies four 90 × 90 × 15 mm recycled-rubber pieces for £6.49. Some buyers report improvement during a 1,400 rpm spin, while another calls the set useless for a wandering washer. The 15 mm lift needs enough worktop clearance. Navani's round pads have 4.2 from 302 reviews, with walking stopped in some reports and worse jumping in another. The listing omits diameter and thickness. YuhooTech has 4.2 from 5,857: one flat stopped a runaway machine, and another review says the cups did not fit a Bosch. Compare them in the rubber versus plastic guide.

When to stop buying pads

A new violent shake, repeated heavy banging or grinding needs investigation. Derbyshire Appliances notes that pads will not cure worn suspension, a damaged bearing or a seriously uneven floor. Do not keep repeating high-speed spins to test an accessory against a possible fault. If a new machine moves, recheck every transit bolt. If an older machine changed suddenly, consult the manufacturer or an appliance engineer. A stable machine that only troubles the flat below may justify a sheet or squares, but the floor itself may need advice. Do not bolt a domestic washer to the floor as an improvised cure. A rigid fixing can transmit vibration. HSE guidance warns that a fixing which bypasses a pad can defeat it. For a shortlist limited to this batch, see the best anti-vibration pads.

Common questions

Will pads stop my washing machine walking?
They may reduce minor movement after transit bolts, level and load are correct, but the reviews do not support a guarantee. Some FUX, Navani and YuhooTech users report success; other buyers report no improvement or worse movement. Stop if a test spin causes sliding or jumping.
Why does the washer still bang at 1,400 rpm?
Pads do not correct an unbalanced load, transit bolts, unlocked feet, worn suspension, bearings or a flexible floor. One FUX reviewer reported useful 1,400 rpm performance, while another wandering washer was not helped. Persistent heavy banging needs diagnosis rather than thicker pads.
Are pads worth trying on a timber floor?
They can reduce some transmitted vibration, and Loxley reviews include quieter floorboard results. They cannot stiffen a springy floor. Bosch UK suggests a properly supported water-resistant board for an unsuitable wooden floor, so assess the structure as well as the rubber.
What if the machine slides after pads are fitted?
Stop the cycle and remove or reposition the pads safely. Clean and dry the floor, confirm that all feet are supported and re-level the machine. Zestecho reviews show that reducing bounce can still produce sliding on a smooth surface.
Will pads help the neighbour below?
They may lessen structure-borne vibration, but no listing here provides a tested decibel or percentage reduction. Airborne noise remains, and a flexible building floor may dominate the result. Consider machine condition, placement and floor support before promising a neighbour a cure.
Should I bolt the washer to the floor?
Do not improvise a floor fixing. Domestic washers should be installed according to their manufacturer instructions, and a rigid connection may transmit vibration or damage the appliance and floor. Seek manufacturer or engineer advice if the machine cannot remain stable when correctly levelled.

Related pages

Sources

Public UK sources for isolation, appliance setup, and noise-nuisance context. Listings checked 17 October 2026. Prices on amazon.co.uk move.

  1. HSE, Top 10 noise control techniques (retrieved 17 October 2026)
  2. HSE, power-pack noise case study (retrieved 17 October 2026)
  3. Control of Vibration at Work Regulations 2005 (retrieved 17 October 2026)
  4. Environmental Protection Act 1990, section 79 (retrieved 17 October 2026)
  5. GOV.UK, noise nuisances (retrieved 17 October 2026)
  6. Breckland Council, domestic appliance noise (retrieved 17 October 2026)
  7. Bosch UK, washer vibrates and moves (retrieved 17 October 2026)
  8. Electrolux UK, stop a washer vibrating (retrieved 17 October 2026)