Independent comparisons. We may earn from shop links. More info

Anti-vibration pads buying guide: what to choose

Updated: October 2026

An anti vibration pads buying guide has to begin with the object, not the star rating. An amazon.co.uk search mixes full rubber sheets, four separate squares, plastic foot cups, threaded machine feet and speaker spikes, although they do different jobs. Before buying, identify whether you need to reduce movement, interrupt vibration entering the floor or replace a fitted machine foot. Our [anti-vibration pads comparison](/hub/tool-accessories/anti-vibration-pads) keeps the current prices and ratings together. This guide explains the trade-offs, so you can measure once and reject products that cannot fit. A qualifying purchase can earn a commission at no extra cost to you.

An anti vibration pads buying guide has to begin with the object, not the star rating.

Our top picks

Loxley Loxley Benedict 60 cm mat

Best overall

Loxley Loxley Benedict 60 cm mat
8.2/10about £27.99
View offer
YuhooTech YuhooTech foot cups, pack of 4

Alternative

YuhooTech YuhooTech foot cups, pack of 4
7.3/10about £8.59
View offer
FUX FUX 90 × 90 × 15 mm, pack of 4

Best value

FUX FUX 90 × 90 × 15 mm, pack of 4
7.9/10about £6.49
View offer
On this page
  1. 1.Five objects appear in one search
  2. 2.Balance thickness, area and the available gap
  3. 3.Check what the listing actually states
  4. 4.Set realistic expectations

Five objects appear in one search

A full sheet supports the whole appliance area, but it is the hardest form to slide beneath a fitted washing machine. The Loxley sheet measures 60 × 60 cm and 8 mm thick. A review reports that it would not fit under a run of units. Four rubber squares sit beneath individual feet. FUX states 90 × 90 × 15 mm, while the LouMaxx titles state 10 × 10 × 1.5 cm and 9 × 9 × 1 cm. A narrow hard foot concentrates the machine's weight, and one shared LouMaxx review says the feet wore through the material. A polypropylene and TPU cup has a groove intended to hold the foot and may resist sliding. It also raises the appliance. The rubber or plastic pads comparison separates grip from isolation. Threaded M8 feet belong on machines designed for that thread. Tiny 10 mm blocks may suit a soundbar, but they do not have the area needed beneath a washer.

Balance thickness, area and the available gap

There is no universal best thickness in the supplied evidence. Some UK sellers suggest a few millimetres and others 10–25 mm. That is seller guidance. None of these listings states Shore A hardness. Loxley is an 8 mm sheet, the smaller LouMaxx is 10 mm, and FUX and the larger LouMaxx are 15 mm. A thicker pad can lift the machine into the worktop before it compresses. Sound Service advises a thin board above its 10 mm sheet so feet do not punch into the material. Bosch UK recommends a water-resistant board at least 30 mm thick on a poor timber floor. Measure the foot and the worktop clearance. The fitting guide covers transit bolts, levelling and a test spin.
Loxley Loxley Benedict 60 cm mat

Testsieger

Loxley Loxley Benedict 60 cm mat
8.2/10about £27.99
View offer

Check what the listing actually states

None of the twelve products supplies a Shore A figure, a stated load, or a hardness you can compare. Look for internal conflicts. The larger LouMaxx title says 10 × 10 cm, while its specification says 20 × 20 cm. YuhooTech's specification says 35 × 35 × 35 cm at 250 g, which does not match a foot cup. Zestecho prints 10 × 30 × 50 mm for a square. Treat these dimensions as unresolved. Both LouMaxx ASINs carry the same 4.2 score, 3,042 count and first 50 review bodies in the stored files. That is one shared review pool. Xindojuz and BeoTnp show 5.0 from one rating each. Use the best anti-vibration pads shortlist only after the form and dimensions pass these checks.

Set realistic expectations

Pads can reduce some structure-borne vibration when they remain in the load path. HSE guidance notes that machine mass and vibration frequency affect the correct mount, and that a fixing which bypasses an isolator can defeat it. These listings do not publish those inputs, so this comparison cannot promise a percentage reduction. Pads do not correct transit bolts left in place, unlocked feet, worn suspension, a damaged bearing or a weak timber floor, and they do not guarantee silence. If a machine suddenly bangs or moves violently, consult its instructions or an engineer. BS EN 1299:1997+A1:2008 provides guidance on source isolation, but none of these packs is shown as complying with it. An uncertified PAK-free bullet is not laboratory evidence for the pad in your hand.

Common questions

Is a sheet better than four pads?
A sheet spreads support across a larger area and may suit vibration entering a timber floor, while four pads are cheaper and easier to position. A sheet can be difficult to fit beneath cabinetry. Squares need enough area beneath each foot so the foot does not cut into the material.
How thick should washing-machine pads be?
There is no universal thickness in the evidence. This batch includes 8, 10 and 15 mm rubber products, but none states hardness or compression under a washer. Choose only after measuring worktop clearance and foot area, and do not treat seller thickness charts as product tests.
Do I need a stated Shore hardness?
A Shore figure would help compare rubber stiffness, but none of these twelve listings provides one. Its absence does not prove a pad will fail; it means you should avoid precise isolation claims and rely on form, dimensions, load information and relevant reviews instead.
Can a 10 mm cube support a washing machine?
The BeoTnp listing states 10 × 10 × 10 mm pieces but gives no load capacity, and its only review concerns a soundbar. That is not adequate evidence for a washing machine. Use a product with an appropriate footprint and a clearly relevant use case.
Will recycled rubber smell or be unsafe?
The supplied evidence does not establish an odour or safety problem for these products. UK REACH's cited PAH restriction concerns rubber in prolonged or repeated skin contact, which is not the normal use of a pad beneath a machine. Do not infer certification where none is shown.
What should I measure before ordering?
Measure each machine foot, the overall appliance footprint, free height beneath the worktop and the space around hoses and cabinetry. Also note the floor type and whether the product must slide beneath installed units. Re-level the machine after any pad changes its height.

Related pages

Washing machine anti-vibration pads

Anti-vibration pads

Best anti-vibration pads in this twelve-listing set

How to fit anti-vibration pads under a level washer

Rubber or plastic anti-vibration pads for each job

Sources

Public UK sources for isolation, appliance setup, and noise-nuisance context. Listings checked 17 October 2026. Prices on amazon.co.uk move.

  1. HSE, Top 10 noise control techniques (retrieved 17 October 2026)
  2. HSE, power-pack noise case study (retrieved 17 October 2026)
  3. Control of Vibration at Work Regulations 2005 (retrieved 17 October 2026)
  4. Environmental Protection Act 1990, section 79 (retrieved 17 October 2026)
  5. GOV.UK, noise nuisances (retrieved 17 October 2026)
  6. Breckland Council, domestic appliance noise (retrieved 17 October 2026)
  7. Bosch UK, washer vibrates and moves (retrieved 17 October 2026)
  8. Electrolux UK, stop a washer vibrating (retrieved 17 October 2026)