Independent comparisons. We may earn from shop links. More info

Best frame saw

Updated: 21 October 2026

You typed best frame saw into amazon.co.uk and the results mix jeweller's piercing kits, coping saws, and tools that are not frame saws in the trim sense. The highest star rating in this comparison belongs to a coping saw, not to the wire-frame tool silversmiths mean. This page names one top pick for coping mouldings in timber and one best-value pick for piercing thin metal, each with a skip line. The ten-row table is the [frame saw comparison](/hub/power-saws/frame-saw). Peter F. used the stored amazon.co.uk listings, captured for 20 October 2026. There was no lab test. A qualifying purchase can earn a commission at no extra cost to you.

You typed best frame saw into amazon.co.uk and the results mix jeweller's piercing kits, coping saws, and tools that are not frame saws in the trim sense.

Our top picks

Eclipse Eclipse 70-CP1R

Best overall

Eclipse Eclipse 70-CP1R
9.0/10about £10.89
Generic Generic ADJ-SAW-144

Rank 2

Generic Generic ADJ-SAW-144
8.8/10about £13.99
Eclipse Eclipse PS51

Best value

Eclipse Eclipse PS51
8.4/10about £11.99
On this page

Best depends on the cut

A frame saw holds a thin blade in tension. On amazon.co.uk that name covers two families that do not share blades. Coping saws use pinned ends about 160 mm long and teeth counted in TPI for wood and trim. Jeweller's saws clamp plain-ended wires graded from coarse numbers down to fine sizes such as 4/0 and 6/0 for sheet metal, wax and fine ply. Workshop Heaven states that pinned coping blades and plain-ended jeweller's blades do not fit the other frame. Stars are not a job description. The Eclipse 70-CP1R is 4.5 from 1,107 reviews because woodworkers cope skirtings with it. The Eclipse PS51 is 4.2 from 347 reviews on piercing work with a different blade system. A generic kit can show 4.4 from 28 reviews and still be the wrong crown if you need a coping saw, or too thin a file to set against an Eclipse. The family split is on coping saw vs jeweller's saw.

Best coping saw in this set

For coping skirtings, architrave and curved cuts in timber, the Eclipse 70-CP1R at about £10.89 is the top pick. It is a coping saw with a wood handle, one pinned blade, and a frame that lets you rotate the blade to any angle, which matters when you follow a moulding in a corner. The amazon.co.uk line is 4.5 from 1,107 reviews, the largest sample here. UK notes in the file include a handle not quite square to the frame, a blade that snapped after a few uses, and a saw larger than some buyers expected. The volume of positive trim notes keeps the rating high. Skip it if your work is pierced silver, brass sheet or internal cuts in thin metal. It takes pinned coping blades only. The 144 plain-ended wires in the jeweller's kits do not slot into this frame. The generic 14 TPI set at about £13.99 has five blades and no review line on the captured page, so there is no UK text to set it over the Eclipse.
Eclipse Eclipse 70-CP1R

Testsieger

Eclipse Eclipse 70-CP1R
9.0/10about £10.89

Best piercing frame in this set

For piercing and fine sawing in metal and supported sheet, the Eclipse PS51 at about £11.99 is the best-value frame here. It is a fixed bow with a wood handle and one 32 TPI blade, a piercing wire rather than a coping TPI count. Amazon shows 4.2 from 347 reviews, a deeper file than the 144-blade kits with a few dozen stars. Reviewers describe a frame that stays tight when the clamp is sound. Recurring complaints are supplied blades that were short or missing, which is packing rather than a reason to avoid the bow. Skip it if you wanted a coping saw for skirtings, or a bench pin, clamp and a gross of mixed grades in the same delivery. The frame does not adjust for a stub. You fit full-length plain-ended replacements. The generic adjustable kit at about £13.99 includes 144 blades and scores 4.4 from 28 reviews, but 28 is a thin count and tension loss already appears in the file, so it is not the pick over an Eclipse with hundreds of notes. Grades after you choose the frame are on jeweller's saw blade size.

What not to buy on stars alone

SKYPRO's adjustable frame with 144 blades is about £13.99 and 3.9 from 144 reviews, so it has more written feedback than most generic kits, and it is still not a pick. UK-themed review text repeats clamps that slip, skew the blade or will not grip, and buyers say sizes in the gross are not labelled. Fine cuts when the blade stays put show the teeth can work. A clamp that undoes is a frame fault. Spec rows that call the same listing corded electric at 4500 RPM conflict with a wood-handled hand frame, so ignore those cells. LuLobtg at about £9.99 and Qeunrtiy at about £20.00 bundle pins and blades but show no Customer Reviews line. Taurish at about £22.99 has 4.0 from 1 review and no review body in the file. Gugxiom at about £15.69 is a curved frame with 4.0 from 12 reviews, mostly non-UK text, and no blade in the box. None of those beat an Eclipse on evidence. If you are coping wood, do not buy a jeweller's kit because it lists 144 blades. If you are piercing silver, do not buy the coping saw because it has the most stars.

Common questions

What is the best frame saw in this set?
There is no single best frame saw across both jobs. For coping timber mouldings, the Eclipse 70-CP1R at about £10.89 with 4.5 from 1,107 reviews is the top pick. For piercing thin metal with plain-ended blades, the Eclipse PS51 at about £11.99 with 4.2 from 347 reviews is the best-value frame. Choose the family first.
Best for silver, not for skirtings?
Skirtings need the pinned coping saw. Silver sheet and pierced work need the jeweller's frame and grades such as 2/0 or 1/0, not a 14 TPI coping blade. The blades do not swap between those frames.
Is the 4.5-star Eclipse the one jewellers mean?
No. That rating belongs to the 70-CP1R coping saw for wood. Jewellers mean a piercing frame such as the PS51, or an adjustable plain-end bow. Stars in this category follow the woodworker crowd.
Is a £9.99 kit with 144 blades better value?
Not on evidence. LuLobtg matches that price with a pin and clamp but has no review line. The PS51 costs about two pounds more and has 347 reviews on the frame. Blades are consumables. A clamp that holds matters more than blade count.
Why is SKYPRO not the pick despite 144 reviews?
Clamp slip and unlabelled blades repeat in the review file, and the star line is 3.9, below the Eclipse piercing frame. Review count does not override a fault that makes tension impossible.
What should I skip if I only cope mouldings?
Skip every jeweller's kit, including the 144-blade gross listings. Buy the coping saw family only, and prefer the reviewed Eclipse over an unreviewed generic coping set.
Do missing review lines disqualify a kit?
They do not make the tool unusable, but they disqualify it as a pick here. Without a star line or UK text you are buying specifications only, and clamp quality is what reviews usually expose.

Related pages

Sources

Public UK sources and the amazon.co.uk listings compared on this page. Prices are the stored figures for this set.

  1. Cooksongold, a guide to sawing and piercing (retrieved 21 October 2026)
  2. Jewellers Academy, choosing a jeweller's saw (retrieved 21 October 2026)
  3. Common Woodworking, buying a coping saw (retrieved 21 October 2026)
  4. Workshop Heaven, jeweller and coping saws (retrieved 21 October 2026)
  5. HSE, PUWER overview (retrieved 21 October 2026)
  6. HSE, maintenance of work equipment (retrieved 21 October 2026)
  7. Consumer Rights Act 2015 (retrieved 21 October 2026)
  8. amazon.co.uk Best Sellers, Frame Saws (retrieved 21 October 2026)