Independent comparisons. We may earn from shop links. More info

Landroid Vision or boundary wire: which should you choose?

Updated: October 2026

If your lawn ends at paving on three sides but flows into a neighbour's grass on the fourth, wire-free is not automatically the easier answer. The choice between Landroid Vision or boundary wire is a choice between two kinds of maintenance: install and protect a hard perimeter loop, or give a camera-and-mapping system edges it can recognise. In our [Worx robot lawn mower comparison](/hub/lawn-and-garden-equipment/worx-robot-lawn-mower), the WR142E is the clearest wired example, while the WR303E, WR305E and WR306E use Vision Cloud. Choose the method before the model capacity or the price. A qualifying purchase can earn a commission at no extra cost to you.

If your lawn ends at paving on three sides but flows into a neighbour's grass on the fourth, wire-free is not automatically the easier answer.

Our top picks

WORX WORX Vision Cloud WR303E

Best overall

WORX WORX Vision Cloud WR303E
9.1/10about £671.99
WORX WORX Landroid WR142E

Preis-Tipp

WORX WORX Landroid WR142E
8.9/10about £499
WORX WORX Vision WR206E

Alternative

WORX WORX Vision WR206E
7.0/10about £457.17
On this page

What each navigation method promises

A boundary wire carries a signal around the mowing area. Once the loop is correct, the mower has a line even when the grass looks the same on both sides. That helps beside a neighbour and through a passage that must behave the same way each time. A scarifier or a pulled peg can break the cable later. Camera Vision drops the full loop and reads the edge. The WR206E is the camera-only row here. It may still need a magnetic strip where grass continues. Do not copy its strip and passage figures onto the Cloud machines. Vision Cloud adds VSLAM and cloud RTK on the WR303E, WR305E and WR306E. It supports app zones and does not need a local antenna or boundary cable. It still needs a network and a route. It cannot map through steps, a wall or a locked gate. The WR169E sits with the wired models only with a qualification: reviews describe a guide wire the bullets do not clearly name.

Choose a wire for a hard edge or a narrow route

Worx still recommends a wire where one lawn joins another with no barrier. A camera sees grass and may follow it. A signal loop marks where your area ends, which matters if crossing the line would put the mower in a shared space. The WR142E includes 150 m of cable and 210 pegs, at £499, and the title states 700 m². Reviews include a wired passage that worked once the guide wires were set, while some wire-free mowers struggled on long narrow grass paths. A scarifier can cut a surface loop, and a buried loop is harder to find. ACS on the WR142E is optional. Choose the wire if the edge is more grass, a corridor must work every time, or dock Wi-Fi is unreliable. Then follow the Worx Landroid setup guide and test the loop on the surface first.
WORX WORX Vision Cloud WR303E

Testsieger

WORX WORX Vision Cloud WR303E
9.1/10about £671.99

Choose Vision Cloud to avoid maintaining a loop

Vision Cloud suits walls, beds or fences you can see, and gardens you alter often, because there is no full loop to cut. Zones can change in the app, within the mapping limits. The WR303E is stated for up to 300 m², with an 18 cm cut and a two-hour runtime. The WR305E states 500 m². The WR306E states 600 m² and includes Cut to Zero. Those steps follow a measured lawn. A larger model does not fix an open grass boundary or missing Wi-Fi. Wire-free still needs a dock, power, 2.4 GHz and a first map on short grass. Where the lawn joins more grass, use a physical border or the exclusion the model approves. Choose Vision Cloud when borders are visible, Wi-Fi reaches the dock and skipping the cable justifies the higher price. The Worx Landroid buying guide then matches the Cloud row to that area.

The camera-only WR206E is not Vision Cloud

The WR206E is easy to misread because the title also says Vision and no boundary wire. It lists camera avoidance, an 18 cm cut, a 20 V 2.0 Ah PowerShare battery and a rain sensor. It does not list the VSLAM and RTK Cloud navigation of the WR303E family. Its manual gives magnetic-strip rules for joined lawns, including a strip or a non-grass path wider than 5 cm. Those figures belong to camera Vision. Do not quote them as a WR303E specification. At £457.17 it undercuts the WR142E and the Cloud rows. The 3.1 line from 23 reviews is the weakest here, the runtime is 45 minutes, and the cutting height conflicts in the listing. The step up to the WR142E is £41.83. The best Worx Landroid guide explains why that cheaper camera row does not take the best-value role.

Common questions

Is the boundary wire obsolete on a Worx mower?
No. A wire remains useful when you need a hard boundary that does not depend on visual contrast, especially where your lawn joins another lawn. Vision Cloud removes cable installation for suitable gardens, and it replaces that job with mapping, Wi-Fi requirements and the need for recognisable edges.
Will Vision stay off the neighbour's lawn?
Do not rely on grass alone to mark the boundary. Worx guidance recommends a wire for joined lawns, while camera Vision documentation describes magnetic-strip or non-grass separation. For Vision Cloud, confirm the approved exclusion method for the exact model and create a physical distinction where crossing would cause a problem.
Is a magnetic strip included?
The compared listings do not establish that a magnetic strip is included. Treat it as a possible extra purchase unless the exact offer lists it in the box. Check compatibility too. Instructions from the WR206E camera Vision manual should not be assumed to apply unchanged to Vision Cloud models.
Are narrow passages better with a wire?
A correctly placed wire can give a narrow route a repeatable edge, and reviews show that some wire-free mowers struggled with long grass paths. Every passage still needs the model's minimum width and a viable approach. Measure the narrowest point and consult the exact installation manual.
Does Vision Cloud work without Wi-Fi?
The Vision Cloud setup and mapping process requires suitable 2.4 GHz connectivity at the charging station. Some functions may behave differently after setup, but you should not buy on the assumption that garden Wi-Fi is irrelevant. Test the proposed dock position before you fix the base.
Which compared models use which method?
The WR303E, WR305E and WR306E are Vision Cloud and state no boundary cable. The WR206E is camera Vision and also wire-free. The WR142E is explicitly wired, with cable and pegs included. WR169E reviews describe a guide wire, although its bullets are unclear.

Related pages

Sources

Sources checked for this comparison; last retrieved on 16 October 2026. Prices and review counts are from the amazon.co.uk listings dated 15 October 2026.

  1. Worx UK, Landroid Vision Cloud (retrieved 16 October 2026)
  2. Worx UK, WR303E (retrieved 16 October 2026)
  3. GOV.UK, Supply of Machinery (Safety) Regulations 2008 (retrieved 16 October 2026)
  4. GOV.UK, outdoor noise (retrieved 16 October 2026)
  5. IEC 60335-2-107, robotic battery mowers (retrieved 16 October 2026)
  6. Worx, boundary-wire installation notes (retrieved 16 October 2026)
  7. Worx WR142E installation guide (retrieved 16 October 2026)
  8. Consumer Rights Act 2015 (retrieved 16 October 2026)