Independent comparisons. We may earn from shop links. More info

Best oil burner nozzle UK

Updated: 22 October 2026

You are staring at a dozen oil jets that all claim to suit a boiler, and the plate on the burner only has room for three marks: flow, angle and pattern letter. This page is the best oil burner nozzle judgement for the listings in the [oil burner nozzle comparison](/hub/heating/oil-burner-nozzle). Peter F. used stored amazon.co.uk prices and review counts, plus public Danfoss and OFTEC guidance, on 20 October 2026. It is not a laboratory smoke test. A qualifying purchase can earn a commission at no extra cost to you. You should know which coded row matches a typical kerosene plate, which solid letter is a different job, and which cheap titles to leave in the search results.

You are staring at a dozen oil jets that all claim to suit a boiler, and the plate on the burner only has room for three marks: flow, angle and pattern letter.

Our top picks

Danfoss Danfoss 0.60 × 80 EH

Best overall

Danfoss Danfoss 0.60 × 80 EH
9.8/10about £12.91
View offer
Danfoss Danfoss 0.65 × 60 ES

Rank 2

Danfoss Danfoss 0.65 × 60 ES
9.4/10about £14.00
View offer
Danfoss Danfoss 0.65 × 80 EH

Best value

Danfoss Danfoss 0.65 × 80 EH
9.4/10about £13.00
View offer
On this page
  1. 1.How we judge best in this batch
  2. 2.Coded matches for typical kerosene plates
  3. 3.Solid alternatives when the plate says ES or S
  4. 4.Budget and multi-pack options
  5. 5.Listings to skip for a house boiler

How we judge best in this batch

Best here means the listing you can check against the data plate, not the lowest price. A 5.0 from four reviews is a thinner sample than 4.7 from more than a hundred. Stars do not prove a smoke number. Danfoss EH and ES are the common kerosene family, marked to OFTEC OFS E100 and specified at 8 bar. H, S and B are the wider light-and-heavy-oil family. A title that only says full cone and diesel heating skips the letter. Decode the stamp in the oil burner nozzle buying guide before you order.

Coded matches for typical kerosene plates

The top pick, for a plate that reads 0.60 US gal/h, 80° and EH, is the Danfoss listing at £12.91 (ASIN B00FSNEWSA, part 030H8312). The title prints 1.80 kg/h, the City Plumbing figure for 0.60 at 8 bar. It holds 4.9 from 59 reviews. The brand line says Meterk while the title says Danfoss, so read the stamp on the metal. Best value, when the plate shows 0.65 US gal/h, 80° and EH, is the £13.00 row (B00FSY4U7C, part 030H8314, 1.95 kg/h, 4.7 from 47 reviews). Reviews on the amazon.co.uk listing name a kerosene Rayburn and a Grant Vortex.
Danfoss Danfoss 0.60 × 80 EH

Testsieger

Danfoss Danfoss 0.60 × 80 EH
9.8/10about £12.91
View offer

Solid alternatives when the plate says ES or S

Hollow EH is what many house plates show. The Danfoss 0.65 × 60 ES at £14.00 (B00FU65Q6W, part 030F6314) is solid kerosene spray at 60°, with 4.7 from 56 reviews. Order it when the stamp says ES. Matching it to an EH jet on flow alone soots the heat exchanger. Those letters are on the hollow versus solid oil burner nozzle page. The Danfoss 0.50 × 80 S at £14.00 (part 030F8908) scores 4.7 from 161 reviews and prints 1.87 kg/h, not the 1.50 kg/h City Plumbing gives for 0.50 kerosene at 8 bar. Use it for 0.50, 80° and S.

Budget and multi-pack options

A £7.99 full cone is a bargain only when your papers already name that pattern. Hoite’s 0.50 US gal/h, 60° nozzle (B0FKB5J11H, CP121193) scores 5.0 from four reviews, says diesel heating, and has no Danfoss letter. Hoite’s 0.75 has one review marked Germany. That is not UK evidence, and the title is not an OFTEC mark. METERXITY’s £11.99 two-packs are brass, 9/16-24 UNEF, solid-cone B. The 0.5 GPH pack is not the stamp 0.50 US gal/h, and B is not ES. The listing says tape and a light wrench, with no torque and no reviews.

Listings to skip for a house boiler

METERXITY’s 3 GPH, 60° two-pack (B0H94CVK3V, £11.99) sits above the 0.50–0.65 US gal/h band on most UK domestic kerosene plates. A larger nozzle passes more fuel. It does not save oil. RIVEN’s 1.5 mm nozzle at £11.99 (B0GMR83SMS) is an air-atomising siphon for waste and heavy oil, with a 1/8-inch oil inlet and a 1/4-inch air inlet. Flow is a bore, not gallons per hour at about 8 bar. If the burner locks out, smells of oil or smokes, or the marks are unreadable, use a competent person.

Common questions

Which Danfoss in this list is the safest default?
There is no single default. Copy the three marks on the plate. If they read 0.60 US gal/h, 80° and EH, the £12.91 listing with part 030H8312 is the top pick here, with the caveat that the brand line says Meterk. If they read 0.65, 80° and EH, the best value row is the £13.00 part 030H8314. A different letter is a different flame shape.
Is the £7.99 Hoite good enough for a service?
Only if you already know that exact generic pattern fits the head. The 0.50 US gal/h, 60° Hoite has four reviews and no pattern letter, no kg/h line and no OFS E100 claim. Compared with a Danfoss EH row that prints a part code, you trade traceability for about £5. That saving does not prove clean combustion on a Grant or Rayburn plate.
Why is the RIVEN nozzle in the same category?
Amazon search mixes pressure-jet boiler nozzles with workshop waste-oil hardware. The RIVEN row is a 1.5 mm siphon nozzle that atomises with compressed air. It is in this comparison so you can see the mismatch, not so you can fit it to a domestic kerosene burner.
Do the highest stars mean clean combustion?
No. The 5.0 scores in this set sit on four reviews or on a single review marked Germany. OFTEC expects combustion to be measured at service, not inferred from a star average. We did not lab-test any ASIN on a boiler.
When is 0.65 × 80 EH the right pick over 0.60?
When the old nozzle or the data plate already shows 0.65 US gal/h at 80° hollow. The £13.00 Danfoss row is about a pound more than the 0.60 EH and prints part 030H8314. Reviews on the listing mention a kerosene Rayburn and a Grant Vortex. Do not step up the flow because a larger jet sounds more powerful.

Related pages

Kerosene oil burner nozzle

How to replace an oil burner nozzle

Oil burner nozzle

Oil burner nozzle buying guide: flow, angle, letter

Hollow vs solid oil burner nozzle: letter, not grade

Sources

Public sources named below, taken from the research digest. amazon.co.uk prices, stars and review counts on these twelve listings were taken from the listing files read on 20 October 2026. Page updated October 2026.

  1. Danfoss, Practical tips for oil nozzles (retrieved 20 October 2026)
  2. Danfoss EH/ES oil nozzles, UK design centre (retrieved 20 October 2026)
  3. City Plumbing EH/ES datasheet (retrieved 20 October 2026)
  4. OFTEC, your home guide to liquid fuel heating (retrieved 20 October 2026)
  5. OFTEC, the service (retrieved 20 October 2026)
  6. GOV.UK, competent person schemes (retrieved 20 October 2026)
  7. NHMF, oil-fired appliances (retrieved 20 October 2026)
  8. EOGB on BS 5410-1:2019 and nozzles (retrieved 20 October 2026)