Independent comparisons. We may earn from shop links. More info

Epoxy resin for table tops: a thin coat on wood

Updated: 23 October 2026

You want a clear coat on a wooden desk, a bar, or a small table, and the titles already say table, counter, and sometimes river. Epoxy resin for table tops, in this set, means a thin flood on sealed, level wood. It does not mean a river you can see the floor through. The bottles that state a ratio are 1:1 kits. The only depth a bullet here prints is Craft Resin’s 1/4 inch, about 6 mm. The [epoxy resin comparison](/hub/fillers-adhesives-and-sprays/epoxy-resin) is the full table. This page is the wood, the level, and the depth. Peter F. wrote it from the listings. A qualifying purchase can earn us a commission at no extra cost to you. We did not coat a table for this page.

You want a clear coat on a wooden desk, a bar, or a small table, and the titles already say table, counter, and sometimes river. Epoxy resin for table tops, in this set, means a thin flood on sealed, level wood.

Our top picks

Craft Resin Craft Resin crystal clear kit, 1 litre

Best overall

Craft Resin Craft Resin crystal clear kit, 1 litre
9.4/10about £23.99
View offer
SigWong SigWong crystal clear kit, 1,100 ml

Best value

SigWong SigWong crystal clear kit, 1,100 ml
9.0/10about £18.99
View offer
n/a JDiction high gloss epoxy, 4.5 litres

Rank 3

n/a JDiction high gloss epoxy, 4.5 litres
7.2/10about £59.99
View offer
On this page
  1. 1.A table coat is a thin flood
  2. 2.What one litre did on one desk
  3. 3.Level, seal, and dust
  4. 4.When the pour is too deep

A table coat is a thin flood

A flood coat is a film you spread and leave to level: deep enough to look like glass, shallow enough that the mix does not cook itself. Both Craft Resin sizes print a 1/4 inch line, about 6 mm. A different Craft Resin listing, not one of these twelve, prints about 3 mm for a table-top resin and about 50 mm for a 2:1 deep pour. Do not assign that split to Fidton or JDiction. GlassCast 3, for that product only, runs from about 6 mm at 20°C to about 3 mm at 25°C. DR. RESIN names river tables on 473 ml, with no depth. The best clear epoxy resin page treats the top pick as a thin-coat kit. Stop when the pour wants to be a trench.

What one litre did on one desk

The only measured top in these files is a Craft Resin 1 litre review: a desk 120 cm by 40 cm, about 2–3 mm. One person, one top, 0.48 square metres. It is not a rate for other brands, and you cannot scale it to a 2 metre bar. That desk was a 1 litre job, not an 8 litre job, and not a 473 ml job if you also want edges or a second coat. Craft Resin’s 2 litre kit is 1 litre plus 1 litre at £36.99, with the same 6,874 reviews, so you are buying volume rather than a second test.
Craft Resin Craft Resin crystal clear kit, 1 litre

Testsieger

Craft Resin Craft Resin crystal clear kit, 1 litre
9.4/10about £23.99
View offer

Level, seal, and dust

Bare wood holds air in the grain, and a flood on open timber pulls that air up as bubbles. A UK table-top sequence, not a test of these ASINs, is to level, sand, wipe, and seal bare timber before the flood, then keep dust off. Check the level before you mix. Working time is about 40 minutes on SigWong, LET'S RESIN, IModeur, and Suzzam, and 20–30 minutes on Fidton. Water claims do not agree: Craft Resin 1 litre says waterproof, the 2 litre file says water resistant, SigWong says not water resistant, and JDiction and Fidton leave the field empty. Wipe spills. The mix itself is on the how-to page.

When the pour is too deep

JDiction is £59.99 for 4.5 litres at 1:1, with bars and counter tops in the bullets and no depth. A review says a table mould got very hot. Another says a 20 mm pour took two days, past Craft Resin’s 1/4 inch line. The listed weight of 1 kg on 4.5 litres is a broken cell. Fidton is £79.99 for 8 litres, with a 95°C bullet and 20–30 minutes of working time. One review liked a table top-up. Another reports a flash cure, and another a pour that never hardened. The 95°C line is a seller claim, not a hot-pan test. A 1 litre kit matches a top like that 120 cm by 40 cm review. Leave the large tins off a river shortlist.

Common questions

Can I coat a wooden desk with these kits?
Yes, as a thin coat, if you keep the depth inside what the bottle states. Craft Resin’s bullets say 1/4 inch. One review used the 1 litre kit on a 120 cm by 40 cm desk at about 2–3 mm. A river line on a 473 ml bottle is not a river specification.
How thick should the coat be?
Stay at a thin flood. The only figure printed on a kit in this set is Craft Resin’s 1/4 inch, about 6 mm. The desk review was about 2–3 mm. A 20 mm pour is the JDiction review that ran hot and slow, not a target.
How much resin did 1 litre cover in the review?
One Craft Resin review covered a 120 cm by 40 cm desk at about 2–3 mm with the 1 litre kit. That is 0.48 square metres and one account. It is not a rate for SigWong, Funxim, or Fidton. Buy a second litre when the top is larger.
Do I seal the wood first?
Seal bare timber so air in the grain does not bubble the flood, and level the top first or the resin runs to the low side. That is a maker’s sequence, not a result measured on these twelve listings. Fidton’s working time is only 20–30 minutes.
Will a 4.5 litre or 8 litre kit let me pour a deep river?
The volume is there and the chemistry is still 1:1, with no deep-pour depth stated. JDiction’s table mould got very hot. Fidton has a flash-cure review and a pour that never hardened. Use the litres for thin coats if you accept those files.

Related pages

Epoxy resin buying guide

How to use epoxy resin

Epoxy resin

Best clear epoxy resin kits: top pick and best value

Is epoxy resin food safe in the UK? What this means

Sources

Public UK sources used for this comparison. amazon.co.uk prices, stars and review counts are the listing figures for the twelve kits. Sources last checked on 22 October 2026.

  1. HSE construction skin FAQ (retrieved 22 October 2026)
  2. HSE COSHH skin page (retrieved 22 October 2026)
  3. HSE GB CLP (retrieved 22 October 2026)
  4. Regulation 1935/2004 Article 3 (retrieved 22 October 2026)
  5. England SI 2012/2619 Part 7 (retrieved 22 October 2026)
  6. Regulation 1895/2005 Annex I (retrieved 22 October 2026)
  7. GlassCast 3 datasheet (retrieved 22 October 2026)
  8. Craft Resin UK getting started (retrieved 22 October 2026)