Independent comparisons. We may earn from shop links. More info

Best cable terminals

Updated: October 2026

You already know whether the joint is a lighting lever, a vehicle crimp, a battery lug or a ferrule, and you want one listing from this set rather than a single winner. Star lines here run from 4.2 with 31 reviews to 4.6 with 6,474, and one lug pack shows 5.0 from a single rating with no review text. That spread cannot be one league table. The best cable terminals are the ones whose family, size and printed voltage match the job. Prices below are the amazon.co.uk figures captured on 21 October 2026 for the twelve rows on the [cable terminals comparison](/hub/electrical-equipment/cable-terminals). The buying order sits on the [cable terminals buying guide](/hub/electrical-equipment/cable-terminals/sub/cable-terminals-buying-guide).

You already know whether the joint is a lighting lever, a vehicle crimp, a battery lug or a ferrule, and you want one listing from this set rather than a single winner.

Our top picks

On this page

Best is a job, not a star rating

A 4.8 from 29 ratings can outrank a 4.6 from thousands of reviews if you sort by stars alone. QLOUNI’s pin kit is that 4.8. The useful split is the job. A lever for lighting is not a 12 V tube lug, and a bootlace ferrule is not a red ring terminal. A ferrule jaw is the wrong die for red, blue and yellow sleeves.

A lever for a lighting join

If the job is a lighting join and you want the largest UK sample, the flintronic 34-piece lever pack is the top pick in this set. It is about £7.98, listed at 4.6 from 6,474 reviews. Solid cable is listed to 4 mm² and flexible cable only to 2.5 mm², at 250 V, with no current on the spec lines. The title says 34 pieces and the unit count says 50, so you check the parcel. Okeno Select’s 40 levers are about £7.99 and 4.7 from 41 reviews, with 250 V and 32 A on the spec line. A bullet also prints 600 V. Choose Okeno when you want a printed current and can live with a small sample. Choose flintronic when you want the review file. Both stop at 2.5 mm² on flexible cable.

Insulated crimps, with or without a ratchet

For insulated rings, forks and spades, Gorffy is the best value in this set: 300 pieces at about £7.29, 4.5 from 2,780 reviews. Yellow on this listing starts at 2.5 mm² rather than 4 mm². The contact is tin-plated brass and the voltage line is 120 V. There is no tool in the box. Use it when you already own a red-blue-yellow ratchet, and treat the spades as the weak part. Bolatus is about £8.99, with tinned copper, 230 V AC and yellow at 4–6 mm². Pick Bolatus when you want that voltage line. Pick Gorffy when the price and the larger review count matter more. AivaToba’s insulated kit is the option with a ratchet, at about £23.99. Included Components says wire-end ferrule pliers. Buy it as an insulated ratchet, not as a bootlace tool. The cycle is on the how to crimp cable terminals page.

Lugs, ferrules and the pin kit to leave

For 6–25 mm² on a 12 V stud, ANVINKU’s 65 lugs at about £7.79 and Gorffy’s 130 lugs at about £13.98 are the readable options. Both are 12 V DC listings. Ferrules split into a refill and a kit. Flintronic’s 1,500 pieces at about £8.99 have no tool and no colour table. AivaToba’s kit at about £17.99 includes the four-jaw ratchet HSC8-6-4A. Buy the flintronic box if you already own the square jaw. Buy the AivaToba kit if you do not. QLOUNI at about £29.98 stays on the shelf unless you have already matched one of its 28 pin series. It excludes EV high-voltage pins, and the two UK reviews do not describe a fitted connector.

Common questions

Which listing should I buy for a lighting lever?
Flintronic’s 34-piece pack at about £7.98 has 6,474 reviews and a 250 V line, with flexible cable only to 2.5 mm² and no printed current. Okeno’s 40-piece pack prints 32 A and 250 V, and a bullet also prints 600 V, from 41 reviews that do not test those figures. Neither is a WAGO 221, and neither is a DIY consumer-unit terminal.
Gorffy or Bolatus for insulated crimps?
Gorffy is about £7.29, tin-plated brass, 120 V, with yellow from 2.5 mm² and 2,780 reviews. Bolatus is about £8.99, tinned copper, 230 V AC, with yellow at 4–6 mm² and 1,034 reviews. Gorffy is the best value for vehicle wiring if you already have a ratchet. Bolatus is the clearer listing if you want copper and a mains voltage on the page. Both omit the tool.
Which lug pack is 6–25 mm², and which is only 35 mm²?
ANVINKU, the Gorffy 130-piece pack and TOPCZY cover 6–25 mm² with M6 and M8 in the type codes. Where a voltage is printed, it is 12 V DC. TOPCZY prints none, and its piece count conflicts. InYoHui is only SC35-10: 35 mm² and a 10.5 mm hole, with one UK review saying the lugs pulled off.
Do I need ferrules with a tool or without?
Buy flintronic’s 1,500 ferrules at about £8.99 if you already have a four-jaw tool. Buy AivaToba’s kit at about £17.99 if you need model HSC8-6-4A and twin ferrules. Neither page prints a colour-to-size table. The insulated AivaToba ratchet lists ferrule pliers under Included Components. Do not crimp bootlaces in those red-blue-yellow jaws because of that line.
Is the 4.8-star pin kit the best in the set?
No. QLOUNI is 4.8 from 29 ratings, with two UK reviews and no description of a fitted connector. The bullet says the kit is not universal and excludes EV high-voltage pins, ECU and micro terminals, and high-current battery connections. That star line is not a reason to call it the best cable terminal.
Is 5.0 from one rating a top pick?
No. TOPCZY’s 5.0 comes from one rating and the file has no review text. The title says 100 pieces and a bullet says 200 including heat-shrink. That is an unsettled listing. The full table is on the cable terminals comparison if you want every row.

Related pages

Sources

Public UK sources from the research digest, used on 22 October 2026. Shelf prices and star lines are the amazon.co.uk figures for these 12 listings.

  1. Voltimum UK: Termination of conductors (retrieved 22 October 2026)
  2. IET Wiring Matters: Mythbuster 5, terminal blocks (retrieved 22 October 2026)
  3. IET EngX: Ferrule crimps (retrieved 22 October 2026)
  4. legislation.gov.uk: Building Regulations 2010, Schedule 1, Part P (retrieved 22 October 2026)
  5. legislation.gov.uk: Building Regulations 2010, regulation 12 (retrieved 22 October 2026)
  6. HSE: Electrical safety introduction (retrieved 22 October 2026)
  7. Electricity at Work Regulations 1989, regulation 16 (retrieved 22 October 2026)
  8. Furneaux Riddall: terminals guide (retrieved 22 October 2026)