Best MT2 drill chuck for the job you actually do
Updated: 2026-10-23
Star lines and a precision 0.002 bullet do not tell you which chuck to put in the basket. The best MT2 drill chuck in this amazon.co.uk set is the one whose mount and closing method match the job. This page names a top pick and a best value, then a skip for the other listings. The order of checks is the [MT2 drill chuck buying guide](/hub/drilling-and-accessories/mt2-drill-chuck/sub/mt2-drill-chuck-buying-guide). Prices stay on the [MT2 drill chuck comparison](/hub/drilling-and-accessories/mt2-drill-chuck). There is no lab test, and a qualifying purchase can earn a commission at no extra cost to you.
Star lines and a precision 0.002 bullet do not tell you which chuck to put in the basket. The best MT2 drill chuck in this amazon.co.uk set is the one whose mount and closing method match the job.
Star lines and a precision 0.002 bullet do not tell you which chuck to put in the basket. The best MT2 drill chuck in this amazon.co.uk set is the one whose mount and closing method match the job. This page names a top pick and a best value, then a skip for the other listings. The order of checks is the MT2 drill chuck buying guide. Prices stay on the MT2 drill chuck comparison. There is no lab test, and a qualifying purchase can earn a commission at no extra cost to you.
Our top picks
| Badge | Product | Clamping range | Arbor pairing | amazon.co.uk reviews | Note | Price | Offer |
|---|---|---|---|---|---|---|---|
| Best overall |  Cocoarm Cocoarm 1–16 mm keyless | 1–16 mm | MT2-JT3 | 4.7 out of 5 (53 reviews) | 7.9 | about £26.00 | View offer |
| Alternative |  Flylin Flylin 1–13 mm keyed | 1–13 mm | MT2-B16 | 4.6 out of 5 (9 reviews) | 7.4 | about £16.99 | View offer |
| Best value |  Ejoyous Ejoyous 1–13 mm MT2 | 1–13 mm | MT2, chuck taper not named | 4.4 out of 5 (34 reviews) | 7.6 | about £22.59 | View offer |
On this page
What the stars and the 0.002 line do not decide
A star line says how buyers scored the listing they received. It does not say whether your socket is MT2, whether the bore is B16 or JT3, or whether you will reverse. The Wakects bullets say a precision of 0.002, and a later block says 0.002 mm. Neither figure is a measurement of the chuck that arrives.
The WEN LA164K carries 4.7 from 1,378 reviews, and it is still not the top pick. Those reviews are not from the United Kingdom, so that count is not British evidence.
The chuck for forward drilling, and the keyed 13 mm alternative
The top pick is the Cocoarm keyless chuck B0931YTNFQ, about £26.00, 1–16 mm, title mount MT2-JT3, about 1.21 kg, 4.7 from 53 reviews. It is for forward drilling on a lathe tailstock or a pillar drill when you can check JT3. UK reviews cite a 1 mm bit, a Clarke drill-press replacement, and a Myford ML7 tailstock. Skip it if you reverse or tap. One UK review needed a large wrench to release a drill, and the included-components line also names a chuck key, so a key is not confirmed.
The best value is the Ejoyous B08HS56C36, about £22.59, 1–13 mm, about 872 g, 4.4 from 34 reviews, for a shed lathe if you accept that the chuck taper is not named. One UK buyer ordered a second. Skip it when the mount has to be named before you pay. The title says keyed, and one attribute says hand-tightened.
Who should buy the other listings, and who should leave them
Flylin B0DP8NKJD5 is the cheap keyed option: 1–13 mm, MT2-B16, a key in the bullets, about £16.99, 4.6 from 9 reviews. Buy it when 13 mm is enough. Skip it if nine reviews is too small. Wakects B07TZTTXC8 is keyless 1–16 mm with MT2-JT3 in the title, 4.6 from 68, about 1.17 kg. The scored price is about £23.83, and on 22 October 2026 the listing showed £26.59. Skip it when the mount must be unambiguous: an attribute says M3-B18, and the capacity cell says 16 millilitres.
Cocoarm B07L9N58HX is a second keyless 1–16 mm listing, about £24.36, 4.7 from 42, and the reviews do not merge. Skip Ausla at about £20.99: one UK review says the chuck does not fit the arbor. Skip ZffXH, 4.4 from 81 at about £25.99, when the first box has to contain a matching arbor. Skip YDHfdc at about £21.99: reviews describe an arbor too big for the chuck. Skip Bohaner, the heaviest at 1.33 kg, if you expect your existing B16 arbor to swap on. Skip the WEN at about £28.10 when you want British buyer evidence or a named chuck taper. Kozelo states B16 and a 17.78 mm shank at about £23.99 and has no star line.
Tailstock and pillar drill, not the headstock
You can use one MT2 chuck in a tailstock and a pillar drill when both sockets are MT2. Axial pressure pushes the Morse taper home. A headstock cut loads the taper from the side. None of these listings confirms a drawbar thread. ZffXH mentions a 1/4 inch by 20 tpi draw bolt and does not include it.
Do not pick a chuck for the headstock because a machine list also says electric hand tools. If a chuck has already fallen out under cut, stop and get a machinist.
Common questions
Which chuck is the one to buy if I only drill forwards?
Choose the Cocoarm B0931YTNFQ when MT2-JT3 matches and you can live with a 1.21 kg body at about £26.00. UK reviews cover a 1 mm bit, a Clarke replacement, and a Myford ML7 tailstock. Leave it if you will reverse a tap.
Which one is the sensible spend for a keyed 13 mm chuck?
The Ejoyous at about £22.59 is the best value only if you accept an unnamed taper and a listing that says both keyed and hand-tightened. If the mount must be written as MT2-B16, the Flylin at about £16.99 states that pair, with the limit of nine reviews.
Why is the listing with 1,378 reviews not the top pick?
The WEN LA164K's 4.7 from 1,378 is the listing aggregate. The reviews copied for this comparison are not from the United Kingdom, and the chuck taper is not named. Use it when you want a keyed 5/8 inch body and you do not need British buyer evidence.
Are the two Cocoarm chucks the same product?
No. B0931YTNFQ at about £26.00 with 53 reviews and B07L9N58HX at about £24.36 with 42 reviews are separate listings. Both are keyless 1–16 mm bodies titled MT2-JT3. Do not add the star counts together.
What does precision 0.002 tell me?
On the Wakects listing it tells you what the bullet prints. It has no unit in one place and says 0.002 mm in another, and nobody in this comparison measured it. One UK review of that same listing recorded more than a millimetre of runout. Treat the decimal as advertising until you clock the chuck you received.
Which listings should I skip because the arbor may not match?
Skip Ausla when a UK review says the chuck does not fit the arbor. Skip ZffXH and YDHfdc when reviews describe a missing arbor or a B18 nose in a B16 chuck. Skip Bohaner if you expect your existing B16 arbor to swap on. Skip Wakects, Ejoyous and the WEN when the chuck taper must be named before you pay.
Related pages
Sources
Public UK sources from the research digest, last checked on 21 October 2026. Shelf prices and star lines are the amazon.co.uk figures in the display file.
- ISO 296:1991, Morse taper standard (retrieved 21 October 2026)
- CGTK, Morse taper dimensions (retrieved 21 October 2026)
- Arc Euro Trade, drill chuck taper dimensions (retrieved 21 October 2026)
- HSE INDG291, isolate before adjustment (retrieved 21 October 2026)
- HSE L22, PUWER Approved Code of Practice (retrieved 21 October 2026)
- Consumer Rights Act 2015, section 11 (retrieved 21 October 2026)
- GOV.UK, accepting returns and giving refunds (retrieved 21 October 2026)
- Axminster bench-drill manual, seat and drift (retrieved 21 October 2026)