Independent comparisons. We may earn from shop links. More info

Weather vane for a shed

Updated: October 2026

A weather vane for a shed is a small silhouette on timber or in a bed beside it. The same pack on a house ridge is tiles, height and sometimes consent. You may be fitting a coop, a fence or a garden shed, or you may be tempted to reuse that vane on the gable because the bullet said roof. This page stays with the building. Motifs and star lines stay on the main table. The [weathercock comparison](/hub/diy-supplies/weathercock) is that table, amazon.co.uk listings from about £12.99 to about £19.99 on 16 October 2026. Peter F. used those extracts, UK maker size notes and Historic England's permissions page. There was no lab test.

A weather vane for a shed is a small silhouette on timber or in a bed beside it. The same pack on a house ridge is tiles, height and sometimes consent.

Our top picks

SUPERDANT SUPERDANT lighthouse

Best overall

SUPERDANT SUPERDANT lighthouse
8.6/10about £17.09
Jetcloud Jetcloud rooster

Preis-Tipp

Jetcloud Jetcloud rooster
7.4/10about £12.99
Autrucker Autrucker rooster

Alternative

Autrucker Autrucker rooster
6.2/10about £19.99
On this page

Shed scale

Makers put a smaller vane on a shed and a larger one on a house, and they measure that in their own way. Weathervanes Direct puts a small size on sheds, garages and outhouses, about 430 mm between the compass points, and a full size, about 650 mm between the points, on a house. Black Country Metalworks describe a miniature, with an arrow projection of about 29 cm, for sheds and fences. Those numbers are their ranges. They are a scale, not the contents of a £15 box. Jetcloud states a height of 30 cm, which is a height, not a compass span, so it is not automatically the miniature on a maker chart. The lighthouse prints 26.5 by 35.8 cm. Autrucker prints 50 by 35 cm, and one UK review says that scale suits a chicken coop and is too small for a house.

Stake, fence or shed wall

Look at the fixing you were sent, not the word roof in a title. A garden stake is the honest shed-side mount in this cluster: into soil, a bed or a planter, kept vertical. Jetcloud's title names a stake. The lighthouse, the cat vane and the donkey head lead with stakes. One UK review screwed the lighthouse to a fence, which does not show that the box included screws. Screw packs are the other shed job. Autrucker's bullets say screws, and a UK review puts that rooster on a coop rather than a house. Domigard claims a roof bracket and a stake. None of these pages itemise a ridge bracket that lifts tiles. Black Fox's own miniature uses an arm of about 3 inches and a pole of about 14 inches. The order of letters and grease, once the building is chosen, is on how to fit a weather vane.
SUPERDANT SUPERDANT lighthouse

Testsieger

SUPERDANT SUPERDANT lighthouse
8.6/10about £17.09

What not to do on the house

A house ridge is another product. Tiles come off to bed a proper ridge fixing, and Black Fox recommend a roofer for that reason on their own kit. If the building blocks the wind, the pointer cannot show a direction, however carefully you set north. A 30 cm stake pushed into a bed is not that job, and a handful of shed screws is not a substitute for a ridge plate.

Common questions

What size of vane looks right on a shed?
Maker charts put a small vane on a shed: Weathervanes Direct's small size is about 430 mm between the compass points, and Black Country's miniature arrow projection is about 29 cm. Those are their measurements. In this amazon.co.uk set, Jetcloud states a height of 30 cm and the lighthouse states 26.5 by 35.8 cm. Compare like with like. A stated height is not a compass span.
Can the same pack go on a house ridge?
A stake or a shed screw is what these listings describe. A house ridge means lifting tiles and working at height. Black Fox recommend a roofer for their own ridge fixing because tiles come off. None of the extracts here itemise that kind of ridge kit. Using shed screws on a tiled ridge is a different and riskier job than the bullet's word roof.
Do these Amazon listings include a proper ridge bracket?
Not in the extracts we kept. Stakes are named on Jetcloud and on the SUPERDANT lighthouse, cats and donkey. Screws or a wall bracket are named on Autrucker, the Clyfanesy colours, Domigard and the Yocdunm train. Domigard says both a roof bracket and a stake, without a tile-by-tile ridge method. A roof in a title is not a ridge plate.
Do you need planning permission for a stake in a bed?
This page cannot say that permission is never required. A stake in soil is not the same proposal as a fixing through a roof covering. Rules depend on the building and the council. If the garden is ordinary and the stake does not touch the house, you are in a simpler place than a ridge. If you are unsure, ask the planning authority before you treat a forum post as consent.
What changes if the house is listed?
Listed building consent is separate from planning permission. Historic England makes that distinction. Fixing a vane to a listed house can be an alteration that needs consent even when a stake in a bed would not. Ask the council before you drill. A missing answer is a reason to leave the roof alone, not a reason to assume the vane is too small to count.

Related pages

Sources

Met Office, British Geological Survey, legislation.gov.uk, Historic England, Black Fox Metalcraft, Coopers of Stortford and Weathervanes Direct. Prices and stars are the amazon.co.uk listings on 16 October 2026. Prices move.

  1. Met Office, how we measure wind (retrieved 16 October 2026)
  2. Met Office for schools, measuring the weather (retrieved 16 October 2026)
  3. Consumer Rights Act 2015, section 9 (retrieved 16 October 2026)
  4. Historic England, permissions (retrieved 16 October 2026)
  5. British Geological Survey, three norths (retrieved 16 October 2026)
  6. Black Fox Metalcraft, cockerel weathervane (retrieved 16 October 2026)
  7. Coopers of Stortford, assembly sheet (retrieved 16 October 2026)
  8. Weathervanes Direct, sizes (retrieved 16 October 2026)