Shed guttering
Updated: 23 October 2026
You want the rain off one slope of a small shed and into a water butt, not a new system for the house. Shed guttering at that scale is usually a 76 mm mini channel and a 50 mm pipe, sold as a half-shed pack rather than a full eaves kit. This page stays on that limit: one side of about 6 ft, screws you buy yourself, and the roofs that need a different box. The [gutter comparison](/hub/diy-supplies/gutter) holds the amazon.co.uk row we actually captured. That listing and FloPlast's MiniFlo page were read on 21 October 2026. A purchase through our links can earn a commission at no extra cost to you.
You want the rain off one slope of a small shed and into a water butt, not a new system for the house.
You want the rain off one slope of a small shed and into a water butt, not a new system for the house. Shed guttering at that scale is usually a 76 mm mini channel and a 50 mm pipe, sold as a half-shed pack rather than a full eaves kit. This page stays on that limit: one side of about 6 ft, screws you buy yourself, and the roofs that need a different box. The gutter comparison holds the amazon.co.uk row we actually captured. That listing and FloPlast's MiniFlo page were read on 21 October 2026. A purchase through our links can earn a commission at no extra cost to you.
Our top picks
| Badge | Product | Profile | Pipe or section | Fixing | Note | Price | Offer |
|---|---|---|---|---|---|---|---|
| Best overall |  FloPlast FloPlast half-shed pack, 2 m | 76 mm mini gutter, from the title | 50 mm downpipes, from the title | Clip fittings. UK reviews say screws are not included | 7.5 | about £46.30 | View offer |
| Best value |  Bocguy Bocguy adhesive J, 5 m | J-section, self-adhesive | No millimetre section in the capture | Peel and stick after a 1:1 alcohol and water clean | 7.4 | about £24.98 | View offer |
| Alternative |  Funnytek Funnytek adhesive J, 5 m | J-section, self-adhesive | 14 × 26 mm in the bullet | Peel and stick | 6.6 | about £17.99 | View offer |
On this page
One side, about 6 ft
FloPlast describes its MS1 MiniFlo half-shed pack as one side of a standard 6 ft shed. The amazon row in our table, B01M8J7QQS, is titled 76 mm gutter, 50 mm downpipes, and 2 m, at £46.30, with 4.4 from 160 reviews. Two metres lines up with one wall of a small shed, not with both slopes of an apex. UK reviews in the file use it that way: a 6×4 into a butt, a 6×6, a summerhouse, a chicken run, a gazebo. The kit style has one stop end and one outlet, so a two-slope porch has nowhere to finish. The colour cell on this capture reads X-gutter Pack-x. That is not a colour.
What the maker lists, and what the listing does not
FloPlast's MiniFlo page sets out an MS1 contents list for that one side: two 1 m gutters, a union, two fascia brackets, an external stop end, a stop-end outlet, two 1 m pipes, two offset bends, two clips, and a diverter. That is the maker's description of the trade pack. It is not printed in our amazon capture. A different amazon ASIN, B01MCY7S3M, does print a contents list and shows 4.3 from 217 reviews. Do not merge them into B01M8J7QQS. One review says 1 m lengths arrived bent. If a length is creased, a union will not pull it straight.
Screws, brackets, and a butt
Roofing Superstore's note on the half-shed pack says the 25 mm × 4 mm screws are not included. The UK reviews say the same thing: you buy the screws. Wickes' MiniFlo sheet sets fascia brackets at a maximum of 500 mm. Two brackets on a 2 m run sit far wider than that. Buy extra 76 mm brackets before you drill. The maker's MS1 list includes a diverter for a water butt. Our capture does not confirm it was in the carton, so check the pieces. A full butt still needs an overflow that is not a foul stack. If a ladder would rest in the gutter, stop.
Apex, porch, and a stick-on strip
Both slopes are a different product. Gutter Supplies lists SPA6X6B for a 6 × 6 apex, at £70.28 on that page, with shoes rather than a diverter. It is not our ASIN, and we did not score it. A peel-and-stick J is the other wrong object. Funnytek's bullet is a 14 × 26 mm channel. Bocguy's listing does not print a section. Neither is a 76 mm gutter with a 50 mm downpipe. Who each listing is for sits on best gutter. For a shed roof, stay with the clipped pack and buy the screws.
Common questions
Will this pack do a whole shed?
The maker's half-shed pack is one side of a standard 6 ft shed. The amazon title in our capture says 2 m, which matches that one wall, not both slopes of an apex and not a porch with two faces. A review with one stop end and one outlet could not finish a two-slope porch. For both slopes of a 6 × 6, look at a separate apex pack rather than doubling a half kit in your head.
What is actually in an MS1, and is that what Amazon sent?
FloPlast's MiniFlo page lists two 1 m gutters, a union, two fascia brackets, a stop end, a stop-end outlet, two 1 m pipes, two offset bends, two clips, and a diverter. Our amazon capture for B01M8J7QQS does not print that list. A different ASIN does. Check the carton against the maker's list. Do not assume the diverter, the colour, or the screws from a page that left the piece line blank.
Are the screws included?
Not on the evidence we have. Roofing Superstore says the 25 mm × 4 mm screws are not in the half-shed pack, and UK reviews on our row say you buy them. The Wickes MiniFlo sheet uses that 25 mm × 4 mm size, with brackets at 500 mm. Two brackets alone will not meet that spacing on a 2 m run. Pick up extra mini brackets with the screws.
How far apart are shed brackets?
Wickes' MiniFlo sheet sets fascia brackets at a maximum of 500 mm and downpipe clips at 1 m. If you use a fall, that sheet uses 1:350. House FloPlast spacing of 1 m is a different system. On a shed, measure the fascia, divide by 500 mm, and buy the brackets the arithmetic needs rather than the two that a short pack may contain.
Can it feed a water butt?
Yes, that is the job the maker's diverter is for, on one side of a small shed. Our amazon page does not confirm the diverter is in the box, so check. A full butt still needs an overflow that is not a foul drain. FloPlast's own area limit is 20 m² to an outlet in the middle at 1:350, which covers a typical 6 ft shed side and does not cover a large workshop.
What if the roof is an apex?
Gutter both slopes with a pack made for that roof. Gutter Supplies' SPA6X6B, at £70.28 on its page, is one example for a 6 × 6 apex: two gutters, two outlets, and shoes rather than a diverter. It is not the amazon half-shed row. A porch with two slopes failed a reviewer's single stop-end kit for the same reason. Count the slopes before you order.
Related pages
Sources
Public UK sources and the amazon.co.uk listings compared on this page. Listings captured 21 October 2026. Updated 22 October 2026.
- Approved Document H (retrieved 22 October 2026)
- BS EN 607:2023 eaves gutters (retrieved 22 October 2026)
- FloPlast MiniFlo (retrieved 22 October 2026)
- FloPlast rainwater brochure (retrieved 22 October 2026)
- HSE: ladders (retrieved 22 October 2026)
- Wavin Osma rainwater manual, July 2024 (retrieved 22 October 2026)
- Bradford rainwater goods (retrieved 22 October 2026)
- Angels Plastics guttering guide (retrieved 22 October 2026)