Independent comparisons. We may earn from shop links. More info

Best grease nipple kit for a known thread

Updated: 23 October 2026

You already know whether the machine takes metric nipples, or metric plus an inch thread, and you want one listing from this amazon.co.uk set. The best grease nipple kit on that condition is the box whose bullet names the families you use, with enough ratings to show how the case and the heads have behaved. Stars and a large piece count still pick the wrong box if your pitch is not in the text. Shelf prices below are the captured figures, and the full table is the [grease nipple comparison](/hub/diy-supplies/grease-nipple). Peter F. compared these twelve listings on 21 October 2026. This is not a laboratory test. A qualifying purchase can earn a commission at no extra cost to you.

You already know whether the machine takes metric nipples, or metric plus an inch thread, and you want one listing from this amazon.co.uk set.

Our top picks

Swpeet Swpeet 246-piece metric and inch kit

Best overall

Swpeet Swpeet 246-piece metric and inch kit
7.0/10about £16.99
View offer
Nadinsta Nadinsta 100-piece M6 M8 M10 kit

Best value

Nadinsta Nadinsta 100-piece M6 M8 M10 kit
6.8/10about £7.89
View offer
TRILINK TRILINK 160-piece metric kit with wrench

Alternative

TRILINK TRILINK 160-piece metric kit with wrench
6.0/10about £18.99
View offer
On this page
  1. 1.What best can mean for a grease nipple
  2. 2.Top pick when you need metric and inch threads
  3. 3.Best value when the job is M6, M8 and M10
  4. 4.When a smaller pack or a wrench kit is the better buy

What best can mean for a grease nipple

Kingfisher sells M6 x 1, M8 x 1 and M10 x 1 as the common DIN 71412 sizes, and M8 x 1.25, 1/8 BSP and 1/4-28 as other parts. Inside this capture, best means the listing that names the most thread families and carries the most ratings, which is Swpeet, and you skip it if your pitch is absent. It also means the low-priced three-angle metric claim with a large rating count, which is Nadinsta. The checks are on the grease nipple assortment page. If you are unsure whether the old nipple is M10 x 1 or 1/8 BSP, use the metric or BSP grease nipple page first.

Top pick when you need metric and inch threads

Swpeet B08MF87W2S is the top pick when you want one box that names both metric sizes and inch threads. It is £16.99, with 4.4 from 653 ratings. The bullet lists 1/4-28 and 1/8-27 in straight, 45° and 90° forms, plus M6, M8 and M10 in the same three angles, and colour-coded caps. No other listing puts those inch sizes and the metric sizes in one bullet. The thread-type attribute says UN. If you need 1/8 BSP, do not rename the 1/8-27 line. Kingfisher treats 1/8 x 27 as PTF, not as BSP.
Swpeet Swpeet 246-piece metric and inch kit

Testsieger

Swpeet Swpeet 246-piece metric and inch kit
7.0/10about £16.99
View offer

Best value when the job is M6, M8 and M10

Nadinsta B0D1XM9Z14 is the best value when you only need a cheap M6, M8 and M10 claim and you will measure before you fit. It is £7.89, with straight, 45° and 90° nipples, red caps, and 4.4 from 307 ratings. Nadinsta does not print a pitch, and a heading says metric and SAE, so M8 has not chosen between M8 x 1 and M8 x 1.25. The bullet says galvanized iron. One review says the nipples were soft aluminium and tore when the gun was pulled sideways, and another says the thread was not a standard size.

When a smaller pack or a wrench kit is the better buy

TRILINK B0DQ9MQ8CN is the metric kit when you want a wrench and you do not need caps or inch sizes. It is £18.99, the highest price here, for 160 M6, M8 and M10 fittings in straight, 45° and 90° forms, at 4.4 from 50 ratings. UK reviews mention a digger and a Takeuchi. A Netherlands review says some heads leak and that the head thread spins. There is no pitch and no dust cap. REJOECE B0GDFCCS17 is the clearer small kit if colour-coded caps and three spanners matter more than a large sample. It is £9.49, and the 153 is 75 nipples, 75 caps and three spanners. The star line is 4.2 from five ratings.

Common questions

Which kit in this set has the most reviews?
Swpeet B08MF87W2S, at 4.4 from 653 on the amazon.co.uk line, at £16.99 in this capture. The saved review texts are not all from the United Kingdom. They include the US, Australia and several European countries, and some complain about box hinges. The count is still the largest here. It does not prove a pitch the bullet has not printed.
Which is the best value if I only need M6, M8 and M10?
Nadinsta B0D1XM9Z14, at £7.89 and 4.4 from 307, with three angles and caps. The pitch is not stated, a heading also says SAE, and one review reports a soft body that tore. Eleechen is a similar price with a piece count that does not add up and only nine ratings.
Which listing names inch threads as well as metric?
Swpeet's bullet names 1/4-28 and 1/8-27 as well as M6, M8 and M10. IVhomeshop's title says metric and imperial and the bullet names M6, M8, M10 and 1/8 only, with no pitch and no 1/4 line, at £13.99 and 4.4 from 164. Nadisean's 134-piece row prints M1/8 and M1/4 without saying BSP or UNF. Those three wordings are not the same contents list.
Who should skip the Swpeet kit?
Skip it if you need M8 x 1.25, M10 x 1.5, or a thread the bullet does not name, including a clear 1/8 BSP label. Skip it if you need the reviews to be a UK-only sample, or if a fragile hinged box is a known annoyance. Also skip it if you have already measured one straight size and you only want a five-piece pack.
Are the two Nadisean star lines separate?
No. Both captures print 4.6 from 138, the same Best Sellers Rank, and the same named review texts. One ASIN is the 100-piece metric assortment at £8.59. The other is the 134-piece row at £9.59, which adds unspecified M1/8 and M1/4 lines. Keep both if the contents differ. Do not add the counts and call it 276 opinions.
Is the £3.99 five-piece pack a best buy?
Only if the size line matches a thread you have measured and you want a straight nipple. The two Nikovoke ASINs share a model number and the same two reviews, which talk about delivery, not a machine. Each title says five straight sizes, and each piece-count field says 1. The included-components line says a pressure washer adapter. That conflict is too wide for a default workshop box.

Related pages

How to fit a grease nipple

Grease nipple

Grease nipple assortment: check pitch before count

M10 grease nipple or 1/8 BSP: tell the threads apart

Grease nipple not taking grease: ball, gun or joint

Sources

Public UK sources and the amazon.co.uk listings compared on this page. Listings captured 21 October 2026. Updated October 2026.

  1. Kingfisher metric hydraulic grease fittings (retrieved 21 October 2026)
  2. Kingfisher BSP hydraulic grease nipples (retrieved 21 October 2026)
  3. Kingfisher 1/4-28 hydraulic grease fittings (retrieved 21 October 2026)
  4. HSE: hydraulic injection injury (retrieved 21 October 2026)
  5. HSE: track tensioning (retrieved 21 October 2026)
  6. Pressol: DIN standards for lubrication (retrieved 21 October 2026)
  7. Skill Shack: how to grease nipples (retrieved 21 October 2026)
  8. UK Planet Tools: Sealey AB009GN assortment (retrieved 21 October 2026)