Independent comparisons. We may earn from shop links. More info

Construction tripod for site lights

Updated: 23 October 2026

You want light over a bench or a yard, and amazon.co.uk keeps showing a flood already welded to a stand. A construction tripod for site lights, in this comparison, is the bare steel bar. The lamp is separate, and the SabreCut height is 65–160 cm on the spec lines even where the title says 1.8 m. Only the SabreCut SCLEDTRIPA and the Maclean MCE583 belong here, captured on 20 October 2026. We did not load the bars in a lab, and a qualifying purchase can earn us a commission at no extra cost to you. The full table is the [construction tripod comparison](/hub/diy-supplies/construction-tripod).

You want light over a bench or a yard, and amazon.co.uk keeps showing a flood already welded to a stand. A construction tripod for site lights, in this comparison, is the bare steel bar.

Our top picks

SabreCut SabreCut SCLEDTRIPA work-light tripod

Best overall

SabreCut SabreCut SCLEDTRIPA work-light tripod
5.9/10about £23.99
View offer
Maclean Maclean MCE583 floodlight tripod

Alternative

Maclean Maclean MCE583 floodlight tripod
5.5/10about £23.12
View offer
On this page
  1. 1.A lamp bar, not a laser screw
  2. 2.Height and load on the two stands
  3. 3.One head or two, and the floor
  4. 4.Light the task, and when the electrics are not a DIY job

A lamp bar, not a laser screw

SabreCut’s SCLEDTRIPB is a different model. The stands in the set are the SabreCut SCLEDTRIPA and the Maclean MCE583. Both are sold as supports for floods. Neither listing states a 1/4 inch or a 5/8 inch laser thread. If the tool in your hand is a cross-line, a rotary, or a dumpy, you are on the wrong page. The screw and the low working height are on the construction tripod for a laser level page.

Height and load on the two stands

The SabreCut spec lines say 65–160 cm. The title says up to 1.8 m. SabreCut’s own page repeats that split at the same £23.99. If your beam has to clear 160 cm, the spec lines do not promise it. The stated maximum on the top bar is 8 kg, a listing claim, not a wind speed. The Maclean is £23.12, 62–150 cm, a 10 kg claim, lamp not included, 4.3 from 241 reviews. The construction tripod buying guide still runs thread first when the tool might be a laser. On this page the tool is already a flood.
SabreCut SabreCut SCLEDTRIPA work-light tripod

Testsieger

SabreCut SabreCut SCLEDTRIPA work-light tripod
5.9/10about £23.99
View offer

One head or two, and the floor

The SabreCut bullets describe a bar for one or two SabreCut LED work lights, and they limit the second head to the SCLED706DCUK. UK reviews report missing cross-beam screws, short bolts, and stripped threads. The box-contents field says LED Lights, which conflicts with bullets that describe the tripod. Feet on the SabreCut are plastic or rubber. One reviewer reported a male M8 stud. That is a review, not a laser thread. The Maclean bullets do not describe the feet. If you are still unsure you wanted a lamp bar, the best construction tripod page keeps the laser stands separate.

Light the task, and when the electrics are not a DIY job

These captures do not show an IP rating, a lumen figure, or a BS 1363 plug. If a lamp you add has no UK 13 amp plug, that problem sits with the lamp. In Great Britain a consumer stand falls under the General Product Safety Regulations 2005. In Northern Ireland, GOV.UK says EU Regulation 2023/988 applied from 13 December 2024. No capture shows a UKCA mark. Temporary site electrics, and any use of the stand as a step, are a professional boundary.

Common questions

Can I put a laser level on a SabreCut or Maclean stand?
These two listings are lamp bars, not laser screws. The SabreCut does not state 1/4 inch or 5/8 inch. A UK reviewer mentioned a male M8 stud, and that remains a review rather than a thread specification. The Maclean states no thread at all. A cross-line or a rotary belongs on a laser tripod with the matching screw. Putting the laser on the lamp bar, or a flood on a Bosch plate, mixes two different heads.
Is the SabreCut 1.8 m or 160 cm?
Both numbers are on the record, and they do not agree. The specification lines say 65–160 cm. The title and part of the description say up to 1.8 m depending on leg position. SabreCut’s own page shows the same split at £23.99. Plan on 65–160 cm when you need a figure the spec lines will stand behind. The Maclean states 62–150 cm without that title clash, and it does not claim 1.8 m.
How many flood heads can the bar take?
The SabreCut bullets allow one light, or two, and they limit the second head to the SCLED706DCUK. SCLED707ACUK is named, and it is not the model allowed as the second head. Reviewers have bolted on other floods with longer bolts, and stripped threads are already in the UK reviews. The Maclean does not name a lamp model. Count the heads only after the bracket and the stated load both fit.
Is 8 kg or 10 kg a tested payload?
Neither figure is a lab result here, and neither is a wind rating. The SabreCut states 8 kg on the top bar, separate from its 2.86 kg item weight. The Maclean states 10 kg, separate from its 2.11 kg item weight. A Sylvania stand at 4 kg is a different product. If the floods plus the brackets sit near the stated number, you are at the edge of a claim, not inside a test.
What is the difference between the SabreCut and the Maclean in this set?
The SabreCut is £23.99, 4.6 from 766 reviews, 65–160 cm on the spec lines with a 1.8 m title, 8 kg on the bar, and named SabreCut lamps. The Maclean is £23.12, 4.3 from 241 reviews, 62–150 cm, a 10 kg claim, no lamp in the box, and only two UK-tagged texts in the file. Choose the SabreCut for the larger review sample. Choose the Maclean when the lower price and the cleaner height pair matter more.
What lighting rules apply if this is a real construction site?
You need suitable lighting, daylight where you can get it, and artificial light that does not change how a safety sign looks, plus secondary light if a failure would be a risk. That is HSE site-lighting guidance and regulation 35 of the CDM Regulations 2015. A home garage is not that site merely because you bought a tripod. Temporary site electrics stay with a professional, and these captures do not show a UKCA mark.

Related pages

How to set up a construction tripod

Construction tripod

Best construction tripod: match the thread you own

Construction tripod buying guide: thread and height

Construction tripod for a laser level: height first

Sources

Public UK sources and the amazon.co.uk listings compared on this page. Updated 22.10.2026.

  1. Bosch Professional GB tripods (retrieved October 2026)
  2. Laser Levels Online: thread types (retrieved October 2026)
  3. Laser Level Review: tripods, rods and accessories (retrieved October 2026)
  4. Laser Levels Online: tripod shop table (retrieved October 2026)
  5. HSE: site lighting (retrieved October 2026)
  6. PUWER 1998 (retrieved October 2026)
  7. GOV.UK: General Product Safety Regulations 2005 (retrieved October 2026)
  8. GOV.UK: laser radiation safety advice (retrieved October 2026)