Best Rubi tile cutter
Updated: October 2026
You want one Rubi rail for a UK floor, and the star lines make a single winner look obvious. The best Rubi tile cutter in this set depends on the tile in the room. Three amazon.co.uk listings were compared on 19 October 2026: the HIT-850 N at £284.94 (4.4 from 21 ratings), the HIT-1200 N at £521.99 (4.2 from 48), and the Speed-62 N at £240.79 (4.3 from 2). The [Rubi tile cutter comparison](/hub/cutting-tools/rubi-tile-cutter) holds the cards. A qualifying purchase can earn us a commission at no extra cost to you. None of this is a lab test, and the written reviews are mostly from outside the UK.
You want one Rubi rail for a UK floor, and the star lines make a single winner look obvious. The best Rubi tile cutter in this set depends on the tile in the room.
You want one Rubi rail for a UK floor, and the star lines make a single winner look obvious. The best Rubi tile cutter in this set depends on the tile in the room. Three amazon.co.uk listings were compared on 19 October 2026: the HIT-850 N at £284.94 (4.4 from 21 ratings), the HIT-1200 N at £521.99 (4.2 from 48), and the Speed-62 N at £240.79 (4.3 from 2). The Rubi tile cutter comparison holds the cards. A qualifying purchase can earn us a commission at no extra cost to you. None of this is a lab test, and the written reviews are mostly from outside the UK.
Our top picks
| Badge | Product | amazon.co.uk reviews | Cutting length | Porcelain duty | Note | Price | Offer |
|---|---|---|---|---|---|---|---|
| Best overall |  Rubi Rubi HIT-850 N | 4.4 from 21 | 85 cm | Listed for high-thickness porcelain | 8.8 | about £284.94 | View offer |
| Best value |  Rubi Rubi Speed-62 N | 4.3 from 2 | 77 cm on the listing attribute | Occasional porcelain stoneware | 8.6 | about £240.79 | View offer |
| Alternative |  Rubi Rubi HIT-1200 N | 4.2 from 48 | 120 cm | Listed for high-thickness porcelain | 8.4 | about £521.99 | View offer |
On this page
Best for porcelain up to 60 cm
For porcelain that fits an 85 cm straight cut and a 60 x 60 cm diagonal, the HIT-850 N is the top pick. It is the highest star line here, 4.4 from 21 ratings, with the same 800 kg separation and 3–15 mm range as the long HIT, a 22 mm wheel, and 11.2 kg. Reviewers writing from Germany, Spain, France and Belgium, not the UK, describe fast cuts on 60 cm porcelain, including strips about 2 cm wide. Twenty-one ratings are not a British survey.
Skip it when the diagonal is longer than 60 x 60 cm. A 600 mm square turned corner to corner is about 850 mm, which is geometry, not a Rubi measurement. Skip it when you need a carry bag: the listing does not say one is in the box. Transit damage in the reviews includes a split angle-cutting side and a missing cutting-head part. The buying guide keeps the longer order of checks if you have not measured the diagonal yet.
Best when the tile is 120 cm
The HIT-1200 N is the pick when the straight score is up to 120 cm or the diagonal is up to 85 x 85 cm. The listing states 800 kg, 3–15 mm, a 22 mm wheel, four aluminium arms, a one-handed break, and a carry bag on part 26962. At £521.99 and 15 kg it costs about £237 more than the HIT-850 N. You are paying for length and the bag, not a higher separator rating.
One review, not from the UK, reported guide rails flexing on 60 x 120 tiles, so pressure went uneven and tiles broke. Keep offcuts. The listing still asks for a sample cut above 15 mm. Tradetiler says 20 mm porcelain is unsuitable and treats about 10 mm as the thickness they see in practice. That is the seller's view, not a rewrite of Rubi's 3–15 mm line. A 1200 mm plank stays with large format porcelain.
Best when porcelain is rare
The Speed-62 N is the best value when glazed tile is the daily cut, porcelain is occasional, and the catalogue length of 62 cm is enough. It is listed at £240.79 and 6.8 kg, with double 18 mm guides, a direct view of the score, and an 8 mm wheel. It does not state a separation force. Rubi's table for reference 14975 also gives a 44 x 44 cm diagonal, while an amazon attribute says 77 cm. Until those two figures agree, plan on 62 cm.
The star line is 4.3 from two ratings. The only review text, from France, calls it amateur and not professional. There is no case in the included components. Part 14985 is a different, cased reference. If porcelain is the weekly job, spend about £44 more and move to the HIT-850 N. The HIT versus Speed page is that duty split.
What the stars do not prove
A higher star line is not a test of every UK tile. The HIT-850 N leads this set at 4.4 from 21. The HIT-1200 N is 4.2 from 48, the larger count and a slightly lower average. The Speed-62 N is 4.3 from 2, which can move on a single new rating. The written reviews are from Spain, Germany, France and Belgium, so they signal breakage, flex and transit damage, not British porcelain batches.
None of the three is the best Rubi cutter in the UK. TS-MAX, TX-MAX and a wet saw are not rows in this amazon set. TX-MAX, on Rubi's page, goes up to 1200 kg and 21 mm. A notch, a curve or a mitre still needs a saw. Two failed sample snaps from the same batch are the point where you stop leaning on a rail.
Common questions
Which of these three should I buy for a normal porcelain floor?
If the straight cut fits in 85 cm and the diagonal fits in 60 x 60 cm, buy the HIT-850 N. It states 800 kg, 3–15 mm, and a 22 mm wheel, at £284.94, with 4.4 from 21 ratings. A normal floor of 300 mm or 450 mm porcelain usually sits inside that bed. If the tile is 600 mm square and you will cut diagonals, check the diagonal before you treat the HIT-850 N as enough.
Is the dearest one the best?
No. The HIT-1200 N at £521.99 is the right rail when you need 120 cm or an 85 x 85 cm diagonal. It states the same 800 kg separation as the HIT-850 N. Paying more does not buy a stronger breaker in this set. It buys length, weight, and a listed carry bag. For a shorter porcelain tile, the dearest listing is the one to skip.
Who should skip the HIT-850 N?
Skip it if you are laying 1200 mm tile, or if you need an 85 x 85 cm diagonal, including a 600 mm square cut corner to corner. Skip it if you want a bag in the box, because this listing does not state one. Skip it if you only cut glazed wall tile now and then and 62 cm is enough, in which case the Speed-62 N is the lighter spend.
Who should skip the Speed-62 N?
Skip it when porcelain is the main job, when you need a stated separation force, or when the cut is longer than the 62 cm Rubi gives for reference 14975. The amazon attribute that says 77 cm is a conflict, not a reason to plan a longer floor. Two ratings, and a single review calling the cutter amateur, are a thin basis for a daily porcelain tool.
Does best include a wet saw?
Not in this set. These three are hand-powered rails that score and snap a straight line. A wet saw is the next tool for notches, curves, mitres, and for slabs around 20 mm that a UK seller already warns off the HIT-1200 N. The best rail here is still a rail.
Why is the Speed rating almost useless?
Because it is 4.3 from two amazon.co.uk ratings, and the only review text in the saved listing is one sentence from France calling the cutter amateur. One more review can move that average a long way. Use the listing's own duty words, the 62 cm catalogue length, and the £240.79 price, and treat the stars as a sample that is too small to settle the choice.
Related pages
Sources
Sources from the research digest. Listing prices, stars and review counts are the amazon.co.uk lines for 19 October 2026.
- Rubi HIT-N manual cutter (retrieved 19 October 2026)
- Rubi SPEED-N manual tile cutters (retrieved 19 October 2026)
- Rubi scoring wheels (retrieved 19 October 2026)
- HSE — Silicosis (retrieved 19 October 2026)
- HSE — Manual handling (retrieved 19 October 2026)
- Consumer Rights Act 2015, section 22 (retrieved 19 October 2026)
- Tradetiler — Rubi HIT-1200 N (retrieved 19 October 2026)
- amazon.co.uk — Rubi HIT-850 N (B091Z4RPZV) (retrieved 19 October 2026)