Independent comparisons. We may earn from shop links. More info

Paper circle cutter buying guide

Updated: October 2026

You have a stack of invitations on the kitchen table and amazon.co.uk is showing a £6.99 spinner next to an 8 mm punch pack. Those tools do not do the same job. This paper circle cutter buying guide puts diameter and tool family first, then the printed limit, the review evidence and the price. The [paper circle cutter comparison](/hub/cutting-tools/paper-circle-cutter) keeps every listing and every pound. Shelf prices in the 19 October 2026 extracts run from about £6.99 to about £21.41. A purchase through our links can earn a commission at no extra cost to you. These notes are listing judgements, not a lab test.

You have a stack of invitations on the kitchen table and amazon.co.uk is showing a £6.99 spinner next to an 8 mm punch pack. Those tools do not do the same job.

Our top picks

Ezydka Ezydka circle punch set

Best overall

Ezydka Ezydka circle punch set
8.2/10about £12.89
View offer
NT Cutter NT Cutter C-1500 circle cutter

Best value

NT Cutter NT Cutter C-1500 circle cutter
8.6/10about £14.44
View offer
Rayher Rayher circle cutter 89770000

Rank 3

Rayher Rayher circle cutter 89770000
8.8/10about £21.41
View offer
On this page
  1. 1.Two tools share one search
  2. 2.Write the diameter down first
  3. 3.What the listing must state
  4. 4.Price bands, then what to skip

Write the diameter down first

Write the finished diameter in millimetres before you open a listing. Gift-tag dots are often 15 mm or 25 mm. A photo window is more often 6–12 cm. Badge faces need the die size. An 8/15/25 mm punch set will never cut a 10 cm aperture. An 8–32 cm rotary tool will never punch a 15 mm dot. The UCEC four-pack prints millimetres in the title and inches in the bullets. One UK review sided with the inches. A 1 inch punch is 25.4 mm, not a true 25 mm if you are matching a die. Rayher 89770000 claims 2.6–15 cm, and the maker page agrees. NT Cutter C-1500 does not print a range. The related C-1500P page states 1.8–17 cm. Do not put that range in the C-1500 box. Some rotary tools cannot start below about 4 inches or 8 cm.
Ezydka Ezydka circle punch set

Testsieger

Ezydka Ezydka circle punch set
8.2/10about £12.89
View offer

What the listing must state

Four things have to be on the page, or you skip. A diameter you can check with a ruler. The tool family, and whether a centre pin is part of the design. A material limit in gsm or millimetres, or an honest not stated. Review text that is actually about circles. MOLENCO says paper under 2 mm and not stacked sheets. Flhlxzm says up to 2.5 mm. Rayher’s amazon bullets say paper from 130 g/m², card to 250 gsm, and chipboard to 600 g/m². The maker page says paper from 110 gsm and not for fabric. Do not average those lines. Ezydka prints no gsm. UK notes of the NT cutter describe cuts without a pin hole. That is a review comment, not a bullet on this ASIN. UCEC’s 2 inch listing is 4.3 from 1,017 and the four-pack is 4.6 from 70. Both pools include other shapes. Rotary listings often claim spare blades. Punch packs do not. A parcel that misses the title is a Consumer Rights Act 2015 section 11 point. There is no British Standard number on these listings.

Price bands, then what to skip

Entry, about £7, is a rotary tool with thin review text. Mid, about £11–£16, covers the punches and the NT cutter. The top of this set is Rayher at about £21.41. That price is still not a lab test. Ezydka at about £12.89 has 4.3 from 207, the largest matching sample among the 8/15/25 mm packs. Rayher has 4.2 from 914 and a printed range. NT has 4.2 from 1,111 and no printed range. The top pick is the dearest tool, for an adjustable card circle under 15 cm. The best value is the NT listing if a pin mark is the problem. Skip a listing with no range, a mixed punch pool, a 4 inch minimum for gift tags, or a centre pin on a badge face.

Common questions

What diameter do I actually need?
Write it in millimetres. Tags and dots are often 15 mm or 25 mm. A window in a card is often 6–12 cm. Twenty-five millimetres is about one inch. Two inches is 50.8 mm, which a listing may also call 5 cm. An 8/15/25 mm punch set will not cut a 10 cm aperture.
Should I buy a punch set or one adjustable cutter?
Buy a punch if you repeat one small size near the edge of the sheet. Buy a rotary cutter if the diameter changes from card to card and you will use a mat. Do not buy both until one job is failing. The family page is the longer version of that split.
Will a centre pin spoil a badge or a photo?
Compass-style cutters pin the middle. Rayher’s centre is a pin you press. UK reviews of the NT C-1500 describe cuts without that hole. That is review evidence, not a line on the extract. Badge makers usually need a die size and a clean face.
What if the size in the parcel does not match the title?
Goods must match the description under the Consumer Rights Act 2015, section 11. Section 9 covers satisfactory quality. A short three-pack or a hole that measures wrong is a description problem, not a craft-skill problem.
Are these tools safe around young children?
They are manual tools with sharp edges and small discs. Keep blades covered and discs away from under-threes. A child-friendly bullet is not permission for unsupervised use. Hampshire primary-school art guidance treats craft knives as adult tools.

Related pages

Best paper circle cutter

How to use a circle cutter

Circle cutter for cardstock

Paper circle cutter

Circle punch vs circle cutter: which family to buy

Sources

Public sources used for this comparison, with the amazon.co.uk listings read on 19 October 2026.

  1. NT Cutter C-1500P product page (retrieved 19 October 2026)
  2. Rayher circle cutter 89770000 (retrieved 19 October 2026)
  3. Vaessen Creative circle punch on amazon.co.uk (retrieved 19 October 2026)
  4. Consumer Rights Act 2015, section 9 (retrieved 19 October 2026)
  5. Consumer Rights Act 2015, section 11 (retrieved 19 October 2026)
  6. Hampshire art, craft and design hints for primary schools (retrieved 19 October 2026)
  7. Blankbadge badge making help (retrieved 19 October 2026)
  8. Microscopy-UK circle cutting tips (retrieved 19 October 2026)