Independent comparisons. We may earn from shop links. More info

Best sandblaster gun UK

Updated: 21.10.2026

You already own a compressor, and the amazon.co.uk list mixes a £10.99 hopper, a £21.79 Metabo, a £49.99 kit with a water separator, and a £339.99 walnut machine. The best sandblaster gun UK in this set is the listing that matches the job and the air you can supply, with a named reason to leave the others. The full table is the [sandblaster comparison](/hub/compressors/sandblaster). Prices, stars, and review counts are the amazon.co.uk capture of 19 October 2026, written by the Products Compared editorial team. We did not run a lab test. A qualifying purchase can earn a commission at no extra cost to you.

You already own a compressor, and the amazon.co.uk list mixes a £10.99 hopper, a £21.79 Metabo, a £49.99 kit with a water separator, and a £339.99 walnut machine.

Our top picks

Metabo Metabo SSP 1000

Best overall

Metabo Metabo SSP 1000
7.5/10about £21.79
BGS BGS 3244

Best value

BGS BGS 3244
6.5/10about £14.87
On this page

Best first kit if you want a separator

If the criterion is a separator in the box, the InoKraft premium kit at £49.99 is the row. Across 64 amazon.co.uk reviews the line is 4.0. You get a 900 cc gravity hopper, ceramic nozzles, an extension nozzle, and an oil-water separator. The listing says 60–120 psi and does not print cfm. The media guide names soda, glass beads, and aluminium oxide. The basic kit is £42.99, with 4.3 from only 13 reviews. A review on that listing says the premium kit adds the water separator and the longer nozzle. Pay the extra £7 when your air is wet and you do not already own a separator. Skip both if you will point a hopper upward. Those trade-offs are on the sandblaster buying guide.

Best published spec at a lower price

If the criterion is pressure and airflow printed together, below the InoKraft prices, the Metabo SSP 1000 at £21.79 is the pick. Across 1,084 amazon.co.uk reviews the line is 4.3. Metabo states 7 bar and 300 litres per minute, and a hardened steel nozzle. The UK technical-details field says hand-powered, which conflicts with the 7 bar bullets. Container size is not printed. Skip it if your compressor cannot approach 300 litres per minute at 7 bar. A tank sold as 50 litres is not that figure. Which abrasives CN7 allows is on the sandblasting media page.
Metabo Metabo SSP 1000

Testsieger

Metabo Metabo SSP 1000
7.5/10about £21.79

What to skip under £15

The LIYOU gun at £10.99 is the skip. Across 374 reviews the line is 3.5. Several UK reviews say the grit does not flow, that the hopper exit is tiny, and that the securing screw makes the exit smaller. The listing also names sand, which is not a lawful blasting abrasive. If nothing comes out, the fault routine on how to use a sandblasting gun starts by disconnecting the air. The BGS 3244 at £14.87 is the cheap gun reviewers could use, with a limit. Across 632 reviews the line is 3.8. It prints 453 litres per minute, a 5 mm steel tip, and brown aluminium oxide. UK reviews say results are poor when the gun points up, so keep the gun level or down. The Bohaner A-091 at £13.99 has 4.2 from six reviews, which is not a ranking.

Not a general-purpose gun

The Ejoyous kit at £69.50 claims a hopper up to 50 lb, a 15 ft hose, and 120 psi. Across three reviews the line is 2.6. Airflow is not printed, and the compressor line is 1 or larger, with no unit. The only UK review says the gun worked and that the single white nozzle had already worn out. The HoldOneLight lance at £26.28 is a pressure-washer lance, and the listing names dry silica sand. The AUTOOL HTS558 at £339.99 is an inlet-valve walnut machine, with 2 kg of 1.0 mm shell and no air pump in the box. The intake valve has to be closed. A UK specialist already prices one walnut clean in the hundreds of pounds. A flat panel stays with a shop.

Common questions

What is the best sandblaster gun on amazon.co.uk for a compressor?
The Metabo SSP 1000 at £21.79, when the compressor can approach the printed 7 bar and 300 litres per minute. The InoKraft premium kit at £49.99, when you want the separator in the box and you accept that cfm is not printed. Neither suits a chassis.
Is the InoKraft premium kit worth more than the basic kit?
The captured gap is £49.99 against £42.99. A review on the basic listing says the premium kit adds the water separator and a longer nozzle. Both kits state 900 cc and 60–120 psi, and neither prints cfm. The basic kit's 4.3 is 13 reviews. The premium kit's 4.0 is 64.
Is the Metabo SSP 1000 enough for small rust?
Metabo describes it for small areas and corners. That matches spot rust on a bracket or a tool if the compressor can hold the printed air figure and you use a lawful abrasive. Container size is not printed, so you supply the pot. An axle one BGS reviewer fed with a 25 kg bag is beyond it.
Are the guns under £15 a false economy?
The LIYOU at £10.99 is, if the grit path is as blocked as the UK reviews describe. The BGS 3244 at £14.87 is the cheap gun reviewers could use if you keep it level or down. The Bohaner at £13.99 has only six reviews, so the stars are not evidence yet.
Should I buy the pressure-washer attachment instead?
Only if you have no suitable compressor and you do have a washer reviewers could use: a Kärcher K7 or a petrol washer around 240 bar. A 120 bar domestic washer did not lift the media. The HoldOneLight lance is a wet lance at £26.28. Do not use the silica sand the listing names.
Is the walnut machine the best sandblaster if I only have one car?
No. The AUTOOL HTS558 at £339.99 is for inlet-valve carbon, with the pump excluded and the valve required to be closed. One car does not repay the machine unless you will repeat the work and you can guarantee the valve position.

Related pages

Sources

Sources taken from the research digest. amazon.co.uk prices and star lines were checked on 19 October 2026. Stated pressures and airflow figures are listing claims, not measurements at the nozzle.

  1. COSHH 2002 Schedule 2 (retrieved 19 October 2026)
  2. HSE CN7 Abrasive blasting (retrieved 19 October 2026)
  3. HSENI silica dust (retrieved 19 October 2026)
  4. HSE WL18 (retrieved 19 October 2026)
  5. Atlas Copco UK sandblasting compressor (retrieved 19 October 2026)
  6. Metabo SSP 1000 (retrieved 19 October 2026)
  7. Frost soda blasting (retrieved 19 October 2026)
  8. Scangrit olivine (retrieved 19 October 2026)