Independent comparisons. We may earn from shop links. More info

Wera VDE screwdriver or everyday

Updated: October 2026

You are choosing between a Wera for the furniture in the hall and a yellow driver someone told you to buy because it says VDE. A Wera VDE screwdriver or everyday driver is a fork, not a colour chart. Seven listings in this amazon.co.uk capture make no 1,000 volt claim. Five use VDE or 1,000 volts somewhere on the page, and they do not all say the same thing. A mark is not permission to work live. The table is the [Wera screwdriver comparison](/hub/hand-tools/wera-screwdriver). Recess first, then this fork, is the order on the [buying guide](/hub/hand-tools/wera-screwdriver/sub/wera-screwdriver-buying-guide). Products Compared has not commissioned an insulation test. If you buy through our links, we may earn a commission at no extra cost to you.

You are choosing between a Wera for the furniture in the hall and a yellow driver someone told you to buy because it says VDE. A Wera VDE screwdriver or everyday driver is a fork, not a colour chart.

Our top picks

Wera Wera Kraftform 300 six-piece set

Best overall

Wera Wera Kraftform 300 six-piece set
8.9/10about £29.99
View offer
Wera Wera Kraftform Kompakt Stubby Magazin 2

Rank 2

Wera Wera Kraftform Kompakt Stubby Magazin 2
9.2/10about £20.28
View offer
Wera Wera Kraftform Kompakt VDE Big Pack 1

Alternative

Wera Wera Kraftform Kompakt VDE Big Pack 1
8.8/10about £89.53
View offer
On this page
  1. 1.Everyday sets do not claim 1,000 volts
  2. 2.Three conditions, not a logo
  3. 3.The roll and the two six-piece sets
  4. 4.The slim set, and the 2go that is not slim

Everyday sets do not claim 1,000 volts

Kraftform 300, B000297UEI, is £29.99, six Lasertip drivers whose bullets name slotted, Phillips and Pozidriv. Big Pack 300, B007BZ2AQY, is £54.70, with Torx as well. The extra-long three-piece, B001DZXCAQ, is £27.12, for boilers and brackets, still with no insulation claim. The Micro 12, B009ODV0PI, is £37.21. A precision pouch does not become a 1,000 volt set because the brand is Wera. The stubby at £20.28, Kompakt 20 at £41.95 and Kompakt 28 at £28.38 are bit drivers. Their bullets talk about magazines, not about volts. Use those seven for furniture, appliances, joinery or a pocket. Kraftform colours overlap the insulated range, so a red handle is not evidence. Settle the recess on Pozidriv vs Phillips screwdriver.

Three conditions, not a logo

In England, Wales and Scotland, regulation 14 of the Electricity at Work Regulations 1989 allows work on or near a live conductor, where danger may arise, only when three conditions are all met. It must be unreasonable for the conductor to be dead. It must be reasonable to work live. Suitable precautions must be taken. Northern Ireland's 1991 regulations use the same three conditions. A screwdriver is not one of those tests. If you cannot show the circuit is dead, you are not yet choosing a handle. BS EN IEC 60900:2018 covers insulated hand tools up to 1,000 volts AC and 1,500 volts DC. It does not authorise a job in your house. HSE's HSG85 treats tools to that standard as one precaution during live work that has already been justified. GS38 is for test leads, not these drivers. None of the twelve sets includes a voltage tester. Wera's datasheet for part 05006617001, the roll, states an individual test at 10,000 volts and a working limit of 1,000 volts for that part. That test is not permission to work at 10,000 volts. How to look for a cut sleeve is on how to use a Wera Kraftform screwdriver.
Wera Wera Kraftform 300 six-piece set

Testsieger

Wera Wera Kraftform 300 six-piece set
8.9/10about £29.99
View offer

The roll and the two six-piece sets

The roll, B0CX1V1NLV, is £89.53, 4.7 from 1,255 reviews: two holders and 157 mm blades, some reduced in diameter. Only its bullets name IEC 60900. Reviewers like the second handle and call the roll bulky. One handle broke within 20 days. It is the wide kit when you need the standard on the page, and a poor buy for one woodscrew. B09VCSK9H2 at £25.94 lists PZ1 at 80 mm, PZ2 at 100 mm and four slotted sizes. The title says VDE, a bullet says individually tested, and volts are absent. The attribute says Phillips; follow the contents. In a file of 438 reviews, tips wore in daily professional use and one parcel arrived as three pieces. B09VCSH3G4 at £26.98 is PH1, PH2 and four slotted sizes, with no Pozidriv and no volts in the bullets.

The slim set, and the 2go that is not slim

The slim seven-piece, B00TJ3J7MG at £41.80, claims a 1,000 volt water bath and does not name IEC 60900. Reviews find PZ/S rather than a plain PZ2, thin handles, and smaller sizes that snap. The 2go 100, B06XCKYYKY at £62.00, is 4.4 from 743, claims 1,000 volts, and says 12 pieces in the title and 11 in the set name. Reviews say it is not the slim line, and a PZ2 head snapped on first use. If you need reduced blades, take the slim set and accept PZ/S. Who should skip a job is on best Wera screwdriver. For a consumer unit, stop if you cannot prove the circuit is dead.

Common questions

Do I need a VDE set for furniture and appliances?
Furniture, appliances and ordinary joinery are what the seven everyday listings are for. Kraftform 300 at £29.99 names slotted, Phillips and Pozidriv, and it makes no 1,000 volt claim. Buy a VDE listing when the work includes terminals and the recess matches. The handle colour is shared, so read the listing.
Which listings say 1,000 volts, and which names IEC 60900?
The roll says 1,000 volts and names IEC 60900. The slim seven-piece claims a 1,000 volt water bath and does not name the standard. The 2go claims 1,000 volts and does not name it either. The two six-piece sets say VDE in the title and do not state volts. The datasheet 10,000 volt test stays on the roll.
Does a 1,000 volt mark make live work lawful?
No. Regulation 14 needs three conditions together: unreasonable for the conductor to be dead, reasonable to work live, and suitable precautions. IEC 60900 describes a tool. It does not grant the job.
Is the 2go 100 the slim-shaft set?
The reviews say it is not. Buyers who expected slim shafts found a quiver, and the piece count disagrees, 12 against 11. The slim seven-piece is the listing with reduced blades, and those tips are PZ/S rather than a plain PZ2.
When do I stop and call someone competent?
Stop when the screw is in a consumer unit or on fixed wiring and you cannot prove the circuit is dead, or you cannot meet regulation 14. Stop if the insulation is already cut. A printed 1,000 volt line does not replace a competent person.

Related pages

Wera screwdriver

Best Wera screwdriver for screws, pocket, terminals

Wera screwdriver buying guide: recess before price

How to use a Wera Kraftform screwdriver: grip and bits

Pozidriv vs Phillips screwdriver: ticks or cam-out

Sources

Public UK sources and the amazon.co.uk listings in this comparison. Digest dated 16 October 2026. Page updated October 2026.

  1. Electricity at Work Regulations 1989, regulation 14 (retrieved 16 October 2026)
  2. Electricity at Work Regulations (Northern Ireland) 1991 (retrieved 16 October 2026)
  3. BSI, BS EN IEC 60900:2018 (retrieved 16 October 2026)
  4. Professional Electrician on insulated hand tools (retrieved 16 October 2026)
  5. HSE HSG85 (retrieved 16 October 2026)
  6. Wera Lasertip Kraftform page (retrieved 16 October 2026)
  7. Wera datasheet 05006617001 (retrieved 16 October 2026)
  8. bolts.co.uk on Phillips and Pozidriv (retrieved 16 October 2026)