Independent comparisons. We may earn from shop links. More info

Araldite Rapid vs Standard: five minutes or time to align

Updated: 23 October 2026

You have already decided on Araldite, and the open question is Araldite Rapid vs Standard. Rapid is the fast twin-tube grade. Standard is the slow one. Both listings on our [epoxy resin adhesive comparison](/hub/fillers-adhesives-and-sprays/epoxy-resin-adhesive) are 2 × 15 ml style tubes, both score 4.6 on amazon.co.uk, and both cost under £8 on 19 October 2026. Products Compared did not run a strength test. A shop line that calls Standard the strongest in the range is not a laboratory result. If you buy through our links, a qualifying purchase can earn us a commission at no extra cost to you. Buy Rapid when you can support the joint within minutes. Buy Standard when you still need to line the parts up.

You have already decided on Araldite, and the open question is Araldite Rapid vs Standard. Rapid is the fast twin-tube grade. Standard is the slow one.

Our top picks

Araldite Araldite Rapid 15 ml x 2 tubes

Best overall

Araldite Araldite Rapid 15 ml x 2 tubes
9.2/10about £7.85
View offer
Araldite Araldite Standard 2 x 15 ml

Rank 2

Araldite Araldite Standard 2 x 15 ml
9.2/10about £7.47
View offer
Gorilla Gorilla Epoxy 25 ml (pack of 2)

Rank 3

Gorilla Gorilla Epoxy 25 ml (pack of 2)
9.4/10about £13.00
View offer
On this page
  1. 1.Two grades, two clocks
  2. 2.Rapid: mix only when the joint is ready
  3. 3.Standard: support it, then wait
  4. 4.Same limits, different hurry

Two grades, two clocks

The choice is the working time, not a strength medal. Rapid's page for the 2 × 15 ml tubes says about five minutes to work, about 20 minutes before you handle the joint, and about two hours to full strength. Standard, ASIN B00AU0MW1K, states a 14-hour full cure. An 80-minute repositioning window is on a syringe data sheet, not on this tube listing. Plan around 14 hours and a joint you must support. Rapid, ASIN B003MPEDFI, is £7.85 with 4.6 from 4,653 reviews. Standard is £7.47 with 4.6 from 3,319. A shop price such as £6.61 is not this ASIN's amazon.co.uk price, and other blurbs that give Standard 24 hours or 90 minutes do not match the listing. Gorilla's syringe is a neighbouring fast adhesive, not a third Araldite grade. If you have not settled on Araldite, the best 2 part epoxy adhesive page is the wider choice.

Rapid: mix only when the joint is ready

Rapid suits a clean break you can tape at once: a mug handle, a ceramic chip, or a thread insert in hardwood. Mix equal parts for about 30 seconds. The data sheet gives a bond line around 0.05 to 0.10 mm, about five minutes at 23°C, support around 20 minutes, and full strength around two hours, with best results around 20°C to 25°C. A cold room leaves a weak joint. The listing says you can sand after two hours and states -30°C to 65°C. The brand page states -30°C to 80°C and 270 kg/cm². Do not average 65 and 80. For B003MPEDFI, use the listing's 65°C. The strength figure is the brand's claim. Leave Rapid if you are still adjusting the parts, mixing a large batch, or you need a crystal-clear line. Colour may vary, and the brand page describes a pale yellow cure. It is not for mirrors, food, or drink.
Araldite Araldite Rapid 15 ml x 2 tubes

Testsieger

Araldite Araldite Rapid 15 ml x 2 tubes
9.2/10about £7.85
View offer

Standard: support it, then wait

Standard suits a joint you cannot line up in five minutes. A glasses hinge in the reviews held once it had fully set, and the people who beat superglue with it held the parts with tape or putty. One waits about 24 hours, longer than the 14-hour listing. A cold outdoor set was poor until the work was warm. A shop blurb that calls Standard the strongest in the range is retailer copy, not a test of these ASINs. Both sit at 4.6, and Standard has fewer reviews. Buy it for the long cure. The tube page prints no working time. Eighty minutes belongs to the syringe sheet. Our ASIN is the tubes: the title says 15 ml, the components line says two 15 ml tubes, and the item volume is 30 ml. Check the carton. Viscosity is medium to high, so it sits less runny than Rapid in a vertical joint. That is handling, not a strength test.

Same limits, different hurry

Both grades are water resistant, not a pond or shower specification. Both state -30°C to 65°C on these listings. Both exclude rear-view mirrors, food and drink, and polyethylene, polypropylene, and PTFE. Neither states a food-contact approval. Both are small packs, and neither is the Gorilla syringe. The manufacturer field on Standard says Velcro. That is a data oddity on an Araldite title, not a change of brand. Choose Rapid at £7.85 when you can mix and support the joint within minutes and you want to sand on a two-hour clock. Choose Standard at £7.47 when the parts still need aligning and you can leave them supported for the 14-hour cure, longer if the room is cold. Both listings include metal. That is not a strength contest between the tubes.

Common questions

How long can I move the parts?
On Rapid, assume about five minutes of working time, then support for about 20 minutes. On the Standard tube listing, a working time is not printed. The about-80-minute repositioning figure is on the Standard syringe data sheet. If your pack is the tubes, do not rely on a number the listing does not show.
Can I paint it?
The Rapid listing says you can sand and paint after two hours. Standard's listing does not give that two-hour line. Its full cure is 14 hours. Paint after the cure you actually bought, not after the other grade's clock.
Are the tubes the same volume?
Rapid is stated as 15 ml × 2. Standard's title says 15 ml, while the components line says two 15 ml tubes and the item volume is 30 ml. Read the components line on the page you order, and check the carton when it arrives.
Is Gorilla the same as Rapid?
No. Gorilla Epoxy is a different brand's five-minute syringe, sold here as a pack of two 25 ml syringes at £13.00, with a 24-hour full cure on the listing. It is a fair neighbour if you want a syringe. It is not an Araldite formula and not a slow grade.
Why does one page say 65°C and another 80°C?
The amazon.co.uk listings for both of these ASINs state -30°C to 65°C. Rapid's brand page states -30°C to 80°C. Those are different sources. Use 65°C as the figure printed on the listings in this comparison, and do not merge the two numbers into one claim.

Related pages

Epoxy resin adhesive buying guide

How to use epoxy glue

Epoxy resin adhesive

Best 2 part epoxy adhesive for household UK repairs

Epoxy glue for metal: a clamped repair, not a weld

Sources

Public UK sources used for this comparison. amazon.co.uk prices, stars and review counts were taken from the listings on 19 October 2026.

  1. GB CLP, EUH205 label sentence (retrieved 19 October 2026)
  2. HSE COSHH skin duties (retrieved 19 October 2026)
  3. HSE RR79, sensitisation from uncured epoxy (retrieved 19 October 2026)
  4. Gorilla Epoxy UK product page (retrieved 19 October 2026)
  5. Gorilla on glue drying on wood (retrieved 19 October 2026)
  6. Araldite Rapid technical data sheet (retrieved 19 October 2026)
  7. Araldite Standard syringe trade note (retrieved 19 October 2026)
  8. Consumer Rights Act 2015 (retrieved 19 October 2026)