Independent comparisons. We may earn from shop links. More info

Tool kit for flat pack furniture

Updated: October 2026

The wardrobe is in the hallway and the fixings are in a small bag. A tool kit for flat pack furniture is often a hex key, a light driver, and a hammer. It is rarely a reason to drill chipboard at 800 RPM. The kits on our [tool box with cordless drill](/hub/drilling-and-accessories/tool-box-with-cordless-drill) comparison include 8 V boxes whose bullets say wood, plastic, and screws. They do not state a numbered clutch. The Products Compared editorial team read the listings on 15 October 2026 and did not laboratory-test them. A qualifying purchase can earn a commission at no extra cost to you. This page stays on furniture and light screws.

The wardrobe is in the hallway and the fixings are in a small bag. A tool kit for flat pack furniture is often a hex key, a light driver, and a hammer. It is rarely a reason to drill chipboard at 800 RPM.

Our top picks

DEKO DEKO 126-piece 8 V drill kit

Best overall

DEKO DEKO 126-piece 8 V drill kit
6.9/10about £39.99
View offer
TLGREEN TLGREEN 138-piece 12 V toolbox

Rank 2

TLGREEN TLGREEN 138-piece 12 V toolbox
9.3/10about £49.99
View offer
Maxesla Maxesla 99-piece 21 V combi drill set

Best value

Maxesla Maxesla 99-piece 21 V combi drill set
8.6/10about £37.99
View offer
On this page
  1. 1.What the manual asks for
  2. 2.What these boxes already include
  3. 3.When to leave the drill in the case
  4. 4.The wall is not the wardrobe

What the manual asks for

Open the leaflet first. AM Flatpack says to check panels for damage before you are halfway through. Most cam bolts are meant for the Allen key in the furniture bag. The hex keys in a DEKO list may duplicate that key. They do not replace a step that says tighten by hand. A 3.6 V furniture tool sold elsewhere states 5.5 Nm and 180 RPM. It is not one of the twelve. The 8 V DEKO drills state 800 RPM and do not print a torque you can set against 5.5 Nm.

What these boxes already include

The 126-piece lists include hex keys, screwdrivers, a claw hammer, a tape, fasteners, and the 8 V driver at 800 RPM. A numbered clutch is n/a on the 8 V bullets and on the 12 V DEKO bullets. You get the hand tools a weekend uses, and a drill whose stated control is the trigger. Reviews mention flat-pack and a cabinet. Those are anecdotes, not a stripped-hole test. A hammer and a tape do not need the motor. The drill can ruin the hole if the trigger stays down. The buying guide sets that list against TLGREEN’s printed clutch.
DEKO DEKO 126-piece 8 V drill kit

Testsieger

DEKO DEKO 126-piece 8 V drill kit
6.9/10about £39.99
View offer

When to leave the drill in the case

Leave the drill for cam bolts. The 8 V bullets state wood, plastic, and screws, but not a clutch that would click first. Release the trigger as the head meets the surface. UK wood screws are commonly Pozidriv. Sundpey names Phillips. Flat-pack fixings are often hex. TLGREEN states 22 Nm and a numbered clutch. Maxesla states 42 Nm, so keep it off cam locks. Check every panel before the first cam.

The wall is not the wardrobe

Hanging the shelf is a different fixing from building the wardrobe. A hollow sound means a stud or a cavity fixing. This page will not teach a masonry hole. The 8 V bullets do not state brick. A 12 V bullet that leaves hammer mode unstated has not become a masonry drill because the cupboard is finished. If the wall is brick and you expected hammer mode, the class choice is on the 8V vs 12V cordless drill tool kit page. Book an assembler when a panel is crushed, a cam hole is already stripped, or the tenancy forbids a wall fixing. The toolbox cannot unsplit chipboard.

Common questions

Do you need a drill at all for flat-pack?
Often you do not. Wizard Fix and AM Flatpack start with screwdrivers, a hammer, Allen keys, and a tape. The furniture usually includes a hex key. A drill helps on a long run of identical screws if you can feather the trigger. Cam bolts are a hand turn. Read the step. If it shows a hex and the word tighten, the key in the bag is the tool.
Will the hex keys in a 126-piece kit replace the key in the furniture box?
The 126-piece lists include eight hex keys, and one may match the cam size. The key in the furniture bag is the one the maker packed. Use that first. A kit key of the same size is a spare if the packed key is missing. If the fit is sloppy, stop. A rounded hex in a cam is worse than fetching the original.
Can an 8 V drill strip a chipboard hole?
Yes. The 8 V bullets state wood, plastic, and screws at 800 RPM, and they do not state a clutch. A trigger held down will pull a screw past the point where the threads hold. Reviews mention flat-pack and a cabinet. Those anecdotes do not prove the hole survived. Leave cams to the hex key.
Are the bits Phillips or Pozidriv?
Pozidriv is the common UK recess on wood and chipboard screws. Sundpey names Phillips. The other listings do not mark PZ or PH, so you match the bit to the screw in your hand. A Phillips bit in a Pozidriv head cams out. Flat-pack fixings are often hex, which avoids that choice. Look for the tick marks before you drive a cross-head.
Which kit states a clutch, if you want one?
TLGREEN states 25 levels plus a drill mode and 22 Nm. Sundpey states 25+1 and 34 Nm. Maxesla states 25+3 and 42 Nm. The 8 V and 12 V DEKO bullets do not state a numbered clutch. Maxesla’s 42 Nm is a lot for a cam lock, so the collar is only gentle on a low screw setting. The 8 V kits leave you with the trigger.
When should you book someone to build it?
Book someone when a panel is crushed, a cam hole is stripped, or the tenancy forbids a wall fixing. Book someone when the piece is large and a lean of a few millimetres will show on the doors. The toolbox does not unsplit chipboard. Checking the panels before the first cam, which is AM Flatpack’s advice, is the cheap moment to make that call.

Related pages

How to use the kit

Tool box with cordless drill kits

8V vs 12V cordless drill tool kit: the class split

Best tool box with cordless drill: who should buy it

Tool kit with cordless drill buying guide checklist

Sources

Safety and buying notes from the sources below. amazon.co.uk listings were read with reviews dated up to 10 October 2026.

  1. Electrical Equipment (Safety) Regulations 2016, regulation 3 (retrieved 10 October 2026)
  2. GOV.UK, Electrical Equipment Safety Regulations 2016: Great Britain (retrieved 10 October 2026)
  3. General Product Safety Regulations 2005, regulation 3 (retrieved 10 October 2026)
  4. Consumer Rights Act 2015, section 19 (retrieved 10 October 2026)
  5. GOV.UK, accepting returns and giving refunds (retrieved 10 October 2026)
  6. Electrical Safety First, drills (retrieved 10 October 2026)
  7. London Fire Brigade, home fire safety leaflet (retrieved 10 October 2026)
  8. HSE RR1182, battery-tool noise and vibration (retrieved 10 October 2026)