Independent comparisons. We may earn from shop links. More info

Furniture feet for kitchen cabinets

Updated: 23 October 2026

You are setting kitchen carcasses so the next cabinet and the worktop meet, and a pack of furniture feet for kitchen cabinets looks like a shortcut. In this comparison it usually is not. A bumper or a 10 mm adjuster cannot level a run, and none of the nine amazon.co.uk listings states a plinth clip. Peter F. checked those listings for the [Furniture feet](/hub/diy-supplies/furniture-feet) page on 21 October 2026. Prices in GBP below are that capture. Trade prices are labelled as trade and are not amazon.co.uk prices for these ASINs. No lab test was run. A qualifying purchase can earn a commission at no extra cost to you.

You are setting kitchen carcasses so the next cabinet and the worktop meet, and a pack of furniture feet for kitchen cabinets looks like a shortcut. In this comparison it usually is not.

Our top picks

On this page

A kitchen foot has to meet the plinth, not just the floor

A base unit has to finish level with the unit beside it, because one worktop crosses both. DIY Doctor’s notes put a run on one level, take small slopes in the feet, and tell you to deal with a large fall in the floor first. DIY Kitchens describes legs you level, then cover with a plinth on clips, about 140–170 mm. Eurofit Direct’s set is a 150–180 mm band with clips, about £1.79 including VAT. Häfele’s AXILO 78 states 250 kg static and 80 kg per foot while you adjust, and sells the clip separately. None of those numbers transfers to an amazon.co.uk ASIN in this table.

What in this comparison cannot level a carcass

Screw-on bumpers at 10 mm, 13 mm, 25 mm and 30 mm add a fixed pad. A 13 mm bumper cannot level a kitchen. Panexf says height-adjustable beside a fixed 25 mm bullet, so you still cannot wind it to a plinth. SUMNACON is a 5 cm sofa foot. It does not set a 150 mm gap. LouMaxx states about 10 mm. Yuexitech’s title states 0–20 mm, and three UK reviews say plastic. That travel cannot lift a carcass into a 150 mm plinth band. Where 10 mm is the whole job, the choice is how to choose furniture feet.

A 12–18 cm leg is still not a plinth set

ANBEEISS is the only bullet here, 12–18 cm, that overlaps the 120–180 mm band UK plinth legs often use. No plinth clip is listed. The is-extendable field says no. A dimensions row says 3 × 3 × 60 mm. UK reviews call the M4 × 16 screws short and soft. The 500 kg line names no method. Häfele’s 250 kg static and 80 kg while you adjust stay on Häfele’s page. Buy a trade leg that states the range and the clips. This pack is not the kitchen foot. Floor contact in front of the plinth is on furniture feet on laminate and vinyl.

When the floor or the services need a fitter

If you keep winding feet until the worktop looks level, the end unit carries a lean. When several carcasses share one worktop and the fall is greater than the feet, a fitter sets the run, or the floor is levelled first. A 10 mm foot is a small slope at best, and only if the unit is already the right height. A new foot height that traps a waste is kitchen fitting. A collapsed foot, or chipboard broken out around the screws, needs the carcass repaired. You can level one sound cabinet on a small slope if the leg states its range. This page does not teach a plinth on a pack that never listed a clip.

Common questions

Can these furniture feet hold a kitchen cabinet?
Only a listing with a stated range in the plinth band could even be the right height, and the only overlap here is the ANBEEISS 12–18 cm bullet. It lists no plinth clip, the size rows conflict, and the 500 kg line has no method. The 10–25 mm bumpers and the 5 cm sofa foot are the wrong object. A kitchen run that shares a worktop needs a trade leg that states clips, or a fitter.
What height of leg does a kitchen plinth usually need?
UK trade examples sit around a 150 mm leg. DIY Kitchens describes about 140–170 mm on its own legs. Eurofit Direct’s set is 150–180 mm. Häfele shows bands such as 90–120 mm and 140–170 mm. Those are other products. Your measurement is the gap from the floor to the carcass, including the plinth you intend to clip on. A 13 mm bumper does not reach that gap.
Do any of these nine packs include plinth clips?
None of them states a plinth clip. DIY Kitchens and Eurofit Direct treat clips as part of fitting a plinth. Häfele sells clips as a separate line on its own system. You cannot infer a clip from a 12–18 cm bullet or from a bag of M4 screws. If the plinth must come off for cleaning or for a leak, buy a leg whose listing names the clip.
Why do Häfele and DIY Kitchens mention a lower load while you adjust?
A carcass is awkward while you are still winding the feet, and Häfele states 80 kg per foot under that rotating load against 250 kg static on the AXILO 78. DIY Kitchens tells you to level each foot, then fit the plinth. The lower figure is a reason to adjust before the unit is loaded with a worktop and appliances. It is not a number you can copy onto ANBEEISS, whose 500 kg line has no method and no while-adjusting split.
When should a kitchen fitter take over?
Call a fitter when a run must share one worktop and the floor falls further than the feet, when waste or feeds under a sink must move, or when a foot or the chipboard around it has already failed. You can still set a single sound unit on a small slope if the leg states its range. Cutting a plinth onto a pack with no clip is not a step this comparison supports.

Related pages

Sources

Public UK sources and the amazon.co.uk listings compared on this page. Listings captured 21 October 2026. Updated 22.10.2026.

  1. Quick-Step UK: laminate scratches (retrieved 22.10.2026)
  2. Amtico: cleaning and maintenance FAQ (retrieved 22.10.2026)
  3. Amtico: wear-and-care leaflet (retrieved 22.10.2026)
  4. Karndean UK: frequently asked questions (retrieved 22.10.2026)
  5. Häfele UK: AXILO 78 plinth foot (retrieved 22.10.2026)
  6. Consumer Rights Act 2015, section 9 (retrieved 22.10.2026)
  7. General Product Safety Regulations 2005 (retrieved 22.10.2026)
  8. DIY Doctor: base units (retrieved 22.10.2026)