Best eyelet press
Updated: 23 October 2026
You want one lever press from the amazon.co.uk set, not eight similar frames. The best eyelet press in this comparison is the KATSU four-die kit, at about £34.98, because it pairs 4.3 from 157 ratings with a 14 mm die the other seven do not list. That is the rule. It is not a lab score, and it is not the box with the most rings. The full table stays on the [Eyelet press comparison](/hub/diy-supplies/eyelet-press). Listings captured on 21 October 2026 were used. A qualifying purchase can earn a commission at no extra cost to you.
You want one lever press from the amazon.co.uk set, not eight similar frames.
You want one lever press from the amazon.co.uk set, not eight similar frames. The best eyelet press in this comparison is the KATSU four-die kit, at about £34.98, because it pairs 4.3 from 157 ratings with a 14 mm die the other seven do not list. That is the rule. It is not a lab score, and it is not the box with the most rings. The full table stays on the Eyelet press comparison. Listings captured on 21 October 2026 were used. A qualifying purchase can earn a commission at no extra cost to you.
Our top picks
| Badge | Product | Dies | Rings | Frame | Note | Price | Offer |
|---|---|---|---|---|---|---|---|
| Best overall |  KATSU KATSU 4-die hand press | 6 / 10 / 12 / 14 mm | 400 | Iron | 8.2 | about £34.98 | View offer |
| Alternative |  Keadic Keadic #0 #2 #4 hand press | #0, #2, #4 (1/4, 3/8, 1/2 in) | 3,000 silver and gold | Iron | 7.0 | about £42.99 | View offer |
| Best value |  KATSU KATSU 3-die hand press | 6 / 10 / 12 mm | 1,500 | Iron, also described as cast iron | 7.5 | about £32.99 | View offer |
On this page
The top pick and the rule
The top pick is KATSU model 95310_V1, ASIN B079YTCB8F. The listing gives dies at 6 mm, 10 mm, 12 mm and 14 mm, an iron frame at 3.92 kg, a table-mount claim, and 400 eyelets. Across 157 amazon.co.uk ratings the line is 4.3. No other press here lists 14 mm. A 5.0 from two ratings does not beat that. A 3.9 from 687 ratings does not beat it either, because those reviews include snapped bases.
FreeTec is the long file, at about £35.95, and the listing says cast iron is brittle under misuse. Some buyers set tarp eyelets. Others report a snapped base. You still fix it down and set two rings on scrap. This is spare-room use. Trimming Shop's Green Machine with dies is about £80.49.
Who should skip it
Skip the four-die KATSU if you bought it for the ring count. Four hundred eyelets is the smallest pile in the set, and buyers said refills and extra dies were hard to find from the brand. Keadic lists 3,000 silver and gold rings at about £42.99, with 4.2 from 305 ratings and a stated 5.04 kg. That is the heavier option when the count matters more than 14 mm. One kit arrived without dies, so you open the box before a batch of bags.
Skip it if you cannot mount the base, or if you only need 6 mm. A rocking foot makes an uneven curl. A few fine holes belong on pliers, which is the split on the eyelet press vs pliers page.
Best value if you want more rings
The best value is the KATSU three-die press, model 953104, ASIN B07NVJZ6NC, at about £32.99. It lists 6 mm, 10 mm and 12 mm dies, 1,500 eyelets and an iron frame at 4.53 kg, with 4.0 from 191 ratings. You give up 14 mm and you gain more rings at a slightly lower price. Choose it for 10 mm and 12 mm work, which covers the UK sheet kits this comparison found, when you do not need 14 mm.
Do not merge the two KATSU rows. The three-die model is 953104. The four-die model is 95310_V1. They share a manufacturer part string and differ in contents, weight and price. More than one review says the 6 mm die arrived broken or failed on first use. If your job is 6 mm, this row is a weak bet. DASBET is the same about £32.99, with only 13 ratings. Mount and ring quality sit on the eyelet press buying guide.
When none of these is the right machine
Do not buy Dyna-Living because the line says 5.0. The count is two ratings, the price is about £51.29, and weight is not on the listing. The ductile-iron claim is almost untested on amazon.co.uk. Do not buy BOOMSTART for a tidy size story. At about £35.59 and 4.1 from 80 ratings it lists both 8 mm and 10 mm for the middle size, and one unit was returned after it bent. LetCartMaker's 9,000-grommet claim at about £43.49 sits behind 3.7 from 20 ratings, and a reviewer could not cut fabric with the die.
Stop if the eyelet holds a load on a trailer sheet, if you set rings all day for pay, or if a casting is already cracked. Staff use brings PUWER 1998 into the decision. These kits are not sold as guarded fly presses. A snap on arrival is a seller matter under the Consumer Rights Act 2015.
Common questions
Which press is the top pick, and for whom?
The top pick is the KATSU four-die press, B079YTCB8F, at about £34.98. The criterion is 4.3 from 157 amazon.co.uk ratings plus dies at 6 mm, 10 mm, 12 mm and 14 mm. It suits occasional leather, canvas, banners and sheets when you can fix the base. It is a poor fit if you need thousands of rings or all-day paid work. The score is editorial, not a laboratory test.
Why not the listing with the most reviews?
FreeTec has 3.9 from 687 ratings at about £35.95, the longest file here. The same file includes snapped bases and soft eyelets, and the listing warns that cast iron is brittle. Review count shows what buyers discuss. It does not outweigh a higher star line and a 14 mm die on the KATSU four-die press.
When is the £32.99 three-die KATSU the better buy?
Choose model 953104 when you set 10 mm or 12 mm rings and you want 1,500 eyelets rather than 400. It is 4.0 from 191 ratings and it has no 14 mm die. It is the weaker buy if you depend on 6 mm, because reviews report that small die broken on arrival or on first use. Check the model number on the page you order.
Is 400 eyelets too few?
It is too few if you are about to eyelet a long run and you cannot find refills. Buyers of the four-die KATSU said extra eyelets were hard to find from the brand. It is enough for occasional bags, curtains and a few sheet repairs. Keadic lists 3,000 rings at about £42.99 if the count matters more than 14 mm.
What if I need a daily banner press?
None of these eight kits is specified as a daily sign-shop press. The reviews look like spare-room use. The Green Machine at about £80.49 is a step up in price and still a hand press, not a feeder. All-day work by an employee needs a machine sold for that duty, and PUWER 1998 applies at work.
Related pages
Sources
Public UK sources and the amazon.co.uk listings compared on this page. Updated 22.10.2026.
- GOV.UK: General Product Safety Regulations 2005 (retrieved 22.10.2026)
- General Product Safety Regulations 2005 (retrieved 22.10.2026)
- HSE: PUWER overview (retrieved 22.10.2026)
- Provision and Use of Work Equipment Regulations 1998 (retrieved 22.10.2026)
- HSE: EIS30, industrial presses (retrieved 22.10.2026)
- Consumer Rights Act 2015 (retrieved 22.10.2026)
- Wonkee Donkee: replace tarpaulin eyelets (retrieved 22.10.2026)
- House of Tents: repair tent tarpaulins (retrieved 22.10.2026)