Best welder UK: our top picks from this comparison
Updated: October 2026
If you want the best welder UK shoppers can choose from this amazon.co.uk basket, the answer depends on whether you need wire or only stick. The top pick is the Reboot RBM2100 MAX, because it is the listing with a gas hose as well as gasless wire and stick. The H HZXVOGEN ARC200 is the best value for electrode work. These are editorial choices from listing facts, prices, ratings and captured UK review signals, not a laboratory weld test. Every specification and caveat is in the [welder comparison](/hub/soldering-and-welding/welder). A qualifying purchase can earn a commission at no extra cost to you.
If you want the best welder UK shoppers can choose from this amazon.co.uk basket, the answer depends on whether you need wire or only stick.
If you want the best welder UK shoppers can choose from this amazon.co.uk basket, the answer depends on whether you need wire or only stick. The top pick is the Reboot RBM2100 MAX, because it is the listing with a gas hose as well as gasless wire and stick. The H HZXVOGEN ARC200 is the best value for electrode work. These are editorial choices from listing facts, prices, ratings and captured UK review signals, not a laboratory weld test. Every specification and caveat is in the welder comparison. A qualifying purchase can earn a commission at no extra cost to you.
Our top picks
| Badge | Product | Process | Gas connection | PPE in box | Note | Price | Offer |
|---|---|---|---|---|---|---|---|
| Best overall |  Reboot Reboot RBM2100 MAX 210 A 6-in-1 | Gas MIG, gasless MIG, stick, lift TIG | Yes | n/a | 9.9 | about £142.12 | View offer |
| Alternative |  ANDELI ANDELI MIG-135 Plus gasless 4-in-1 | Pulsed gasless MIG, gasless MIG, stick, lift TIG | n/a | Hood, auto-darkening glasses, leather gloves | 9.1 | about £142.49 | View offer |
| Best value |  H HZXVOGEN H HZXVOGEN ARC200 stick and lift TIG | Stick and lift TIG | No | No | 8.7 | about £59.99 | View offer |
On this page
How this shortlist was chosen
The twelve machines cost roughly £34 to £150 when the comparison data was collected. Star ratings were read with the review count. A 4.9 average from 21 ratings is promising and less settled than a 4.3 average from more than 500. A lift-TIG label carries less weight when the torch is absent, and a MIG title does not prove a gas connection.
Value is judged inside the job. A stick inverter near £60 can be the right spend for electrodes outdoors even though it cannot feed wire. A machine near £140 has to offer broader capability or useful kit. Shocks, tripping protection, hot leads, mismatched consumables and an unsuitable plug fuse take a substantial deduction. No machine here publishes a complete duty-cycle percentage, and output current was not measured. If you have not chosen a process, read the welder buying guide before treating either pick as universal.
Top pick for gas and gasless use
The Reboot RBM2100 MAX costs £142.12 and carries a 4.9-star average from 21 ratings. It is the only model in this basket that clearly lists a gas connection and a gas hose, and it also supports gasless flux-cored wire and stick. Synergic control and a digital display should simplify the first change of wire size or process. The listing includes a MIG torch, earth clamp, electrode holder and gas hose. Lift TIG still needs another torch.
Choose it when you want to learn on flux core now and keep a route to gas-shielded MIG later. Twenty-one ratings are too few to make 4.9 conclusive, and the listing gives conflicting weights of 7.7 kg and 12.7 kg. Aluminium needs an optional LBT-150 spool gun, and one reviewer could not source a compatible gun, so this is not a blanket aluminium recommendation. A reviewer also says heavier plate would call for a 16 A supply. Skip it if you only need occasional stick repairs or you want a large review base. The MIG or stick comparison is the fork if wire itself is still undecided.
Best value for stick
The H HZXVOGEN ARC200 costs £59.99, weighs a stated 2.7 kg and has 4.3 stars from 672 ratings. That mix of price, portability and the largest review count among the stick-led candidates is why it is the best value for electrode work. The package includes 1.5 m electrode and return leads, a brush and a manual. The seller’s supply line is unusually clear: intermittent welding on a standard UK 13 A socket, and 16 A for continuous full-power work. That does not prove 200 A at the arc. The claims of electrodes up to 3.2 mm and material up to 6 mm remain seller figures.
Lift TIG is supported and the torch is not included. There is no helmet in the parts list, so the machine price is not the cost of starting safely. Skip it if you want wire feed, gas, or a ready-to-weld kit. The ANDELI MIG-135 Plus is the narrower alternative when included PPE decides it. At £142.49 it lists a hood, auto-darkening glasses, gloves and wire, with 4.5 stars from 347 ratings. Its gas connection is not confirmed, so it does not replace the Reboot as the broad-capability pick.
Do not treat the lowest price as the safe bargain
The £33.99 DEKO 120 A is the cheapest model and has 4.5 stars from 52 reviews. It may suit low-cost stick practice once rods, a helmet and the plug details are addressed. Low shelf price alone does not make it the value pick. The H HZXVOGEN costs more and has far deeper review evidence and clearer supply wording.
Separate TRQWH reviews describe a shock when switching on, a flame or bang from the housing, and the household fuse or consumer unit tripping. Another experienced owner disputes its 200 A behaviour and regards 3.2 mm rods as unrealistic. At 3.9 stars from 98 ratings, it is not a budget shortcut. A review of the DEKO 135 A reports a 20 A fuse fitted in what should be a 13 A plug. A BS 1363 plug must not use a fuse above 13 A. Stop using a machine found in that state and have the plug and appliance checked. The welder 13 amp plug guide is why title output cannot be unlocked by uprating a fuse.
The Health and Safety Executive says there is no known safe level of exposure to mild-steel welding fume. Indoors, use local exhaust where reasonably practicable, plus suitable respiratory protection where that control is not enough. A top pick does not make an uncontrolled room safe.
Common questions
What is the best welder in this comparison?
The Reboot RBM2100 MAX is the top pick when broad capability is the criterion. It supports gas MIG, gasless wire and stick, and it includes a gas hose, at £142.12. Its 4.9-star rating is based on only 21 amazon.co.uk reviews, so buyers who want a larger review base should weigh that limit. It is not a laboratory result, and heavier plate may want a 16 A supply.
What is the best value stick welder?
The H HZXVOGEN ARC200 is the best-value stick pick at £59.99. It combines a stated 2.7 kg weight with 4.3 stars from 672 ratings, and the seller separates intermittent 13 A use from continuous full-power work on a 16 A supply. The torch and a helmet are not in the parts list. Skip it if the job is wire feed rather than electrodes.
Is the cheapest welder the best value?
No. Value includes the review record, electrical warnings, the accessories you still have to buy, and whether the process fits the job. A cheap machine without rods and PPE can cost more to complete. Reports of shocks, an unsafe plug fuse or overheating leads outweigh a small saving. The £33.99 DEKO is the lowest price here, not the value pick.
Do I need to spend about £140?
Not for occasional stick repair. The higher-priced machines make more sense when you need wire feed, a fuller PPE bundle or a genuine gas path. A stick inverter around £60 can be the better purchase if electrodes fit the work and the supply supports the settings you will actually use. Unused multi-process controls are not extra value.
Can the Reboot top pick weld aluminium?
Do not assume it can from the multi-process title. The seller says aluminium needs an optional LBT-150 spool gun, and one reviewer struggled to find a compatible unit. Aluminium also needs the correct gas, wire and setup. A lift-TIG socket does not establish any of that. Treat aluminium as a separate equipment decision, not a feature already in the box.
Does best mean these machines were physically tested?
No. The picks use amazon.co.uk listing facts, prices, ratings, review counts and captured review signals. There was no laboratory welding, no measured output current and no checked penetration, so seller amperage and thickness figures stay attributed claims. Best here means the best-supported choice against those criteria inside this basket.
Related pages
Sources
Public UK sources and the amazon.co.uk listings in this set, last checked on 17 October 2026.
- HSE, Controlling the risks from welding (retrieved 17 October 2026)
- HSE, mild steel welding fume bulletin (retrieved 17 October 2026)
- HSE WL3, welding fume control (retrieved 17 October 2026)
- BSI, BS EN IEC 60974-1 arc welding power sources (retrieved 17 October 2026)
- GOV.UK, Electrical Equipment (Safety) Regulations 2016 (retrieved 17 October 2026)
- Jasic, TIG DC versus AC (retrieved 17 October 2026)
- The Welders Warehouse, stick welding amps (retrieved 17 October 2026)
- SIP Weldmate Autoplus 130 A (retrieved 17 October 2026)