Independent comparisons. We may earn from shop links. More info

Best wood carving disc for an angle grinder

Updated: 21 October 2026

You want the best wood carving disc for an angle grinder you already own, and the honest answer is the best match inside seven amazon.co.uk listings, not a national winner. Best here means the pack whose diameter, review depth and profile suit the job in front of you. On 20 October 2026 our [rasp disc comparison](/hub/sanders/rasp-disc) runs from the ChongYue three-pack at £6.89 to the Pomsare four-disc set at £28.49. The Products Compared editorial team compared listing fields and the review titles captured with them. We did not run a lab test, and we are not calling any disc the safest in Britain. A qualifying purchase through our links can earn a commission at no extra cost to you.

You want the best wood carving disc for an angle grinder you already own, and the honest answer is the best match inside seven amazon.co.uk listings, not a national winner.

Our top picks

OBA OBA OGD17

Best overall

OBA OBA OGD17
9.4/10about £13.99
View offer
Techfection Techfection 125 mm set

Best value

Techfection Techfection 125 mm set
8.1/10about £13.59
View offer
Pomsare Pomsare W115C

Rank 3

Pomsare Pomsare W115C
7.6/10about £28.49
View offer
On this page
  1. 1.A quick look across the seven listings
  2. 2.Door trimming and ordinary DIY timber
  3. 3.Carving, bowls and shaped profiles
  4. 4.The listing with the most UK reviews
  5. 5.Who should skip each pack

A quick look across the seven listings

How to read diameter, bore and rpm before you care about stars is in the wood carving disc buying guide. Two listings share the highest star line in this file. The OBA single 115 mm disc is £13.99, with 4.5 from 1,558 reviews. The Techfection 125 mm three-piece set is £13.59, with 4.5 from 245 reviews. The OBA is the top pick because the review count is larger at the same score. The Techfection is the best value when your guard is 125 mm. Pomsare is £28.49, 4.4 from 177 reviews, four 115 mm profiles. EJUXPSE is £10.99, 4.0 from 13 reviews. DVDVBOOM is £15.99 with no star line in this capture.

Door trimming and ordinary DIY timber

For a sticking door or a rough length of softwood on a 100 mm grinder, the EJUXPSE is the listing in this set that matches the story. The title says three pieces at 4 inch (100 mm) with tungsten-carbide teeth, the weight is 300 g, and review titles mention aggressive wood removal and shaping. The OBA is a 115 mm single disc, so it is the wrong diameter for a 4 inch guard. ChongYue is cheaper at £6.89, yet the diameter field is empty, the speed is 13,300 rad/sec rather than rpm, and the only review title is "I can't use it".
OBA OBA OGD17

Testsieger

OBA OBA OGD17
9.4/10about £13.99
View offer

Carving, bowls and shaped profiles

When the work is a curve, a bowl or a stump you are happy to rough out, a single flat wheel is the limitation. Pomsare's bullets describe four discs: flat, curved and inclined, at 115 mm, grit 60, carbon steel in the specification, tungsten carbide in the title. Praise titles include timber grinding and carving. Mounting and pressure are on how to use a wood carving disc. Techfection's three 125 mm discs are the other multi-pack with a strong star line, at £13.59 and 1.03 kg. The captured praise titles call them durable.

The listing with the most UK reviews

The OBA OGD17 is the disc to name when someone asks what most buyers in this set actually left a review on. It is one 115 mm carbon-steel wheel at £13.99, with 4.5 from 1,558 reviews, a stated 12,000 rpm and a 22.23 mm arbor. Review titles say it does the job and that it is good for the price. Those titles are the restriction on treating 4.5 stars as a guarantee of life or of fine carving. The bullets tell you to keep metal out of the cut, to use light pressure, and not to run the disc hot. A separate bullet claims the disc fits every angle grinder, which the 115 mm and 125 mm devices line does not support.

Who should skip each pack

Skip the OBA if your guard is 100 mm or if you need several profiles in one box. Skip the Techfection if you do not own a 125 mm guard, or if you refuse to fit a disc with no printed maximum speed. Skip Pomsare if £28.49 is more than you will spend to discover that a review title already reports a disc that did not last, or if you need the title and the material field to name the same metal. Skip the EJUXPSE if you need a stated bore and rpm before you buy, or if thirteen reviews and one "not fit for purpose" title is too thin. Skip DVDVBOOM while the page has no reviews and the title, the pack count and the material field do not agree. Skip YUXNVI while the title says 4 inch tungsten carbide and the table says 46 mm aluminium oxide. If a result looks like a chainsaw on a grinder, stop and read rasp disc versus chainsaw disc. At work, a disc you cannot verify is an employer problem under PUWER.

Common questions

Which disc should I buy first?
Buy the diameter your guard already is. On a 115 mm grinder the OBA at £13.99 is the top pick in this set because 1,558 reviews sit behind a stated 22.23 mm bore and 12,000 rpm. On a 125 mm grinder the Techfection three-pack at £13.59 is the best value line, with the limit that speed is not printed.
Is the dearest set the best?
Pomsare at £28.49 has four profiles and 177 reviews at 4.4, which is a real sample, and it also has titles that report poor life after little use. Extra shapes help when you carve. They do not cancel a material clash between tungsten carbide in the title and carbon steel in the table. If you only need a flat 115 mm face, the OBA costs less than half as much and has many more reviews.
Why not start with the £6.89 pack?
ChongYue is the lowest price and the weakest evidence: 2.0 from one review, title "I can't use it", weight 25 g, blank diameter, and a speed field in rad/sec. A returnable trial is the only honest use of that row. It is not a best pick for a door you have to hang this weekend. Included components on the page reads "no".
Will these discs fit a Makita?
Only if that Makita's guard matches the disc diameter and the bore clamps flat. Reviews in this comparison set describe multi-packs where only one disc fitted a Makita. The brand of the grinder is not on these product pages as a tested compatibility list. Mount, spin by hand, then run free of the timber before you commit.
Can I remove paint with the best-reviewed disc?
The OBA use line includes paint removal, and the bullets mention painted tables, benches and fences. Review titles still describe stock removal rather than a finish you could varnish the same day. Nails in reclaimed timber are the failure the maker warns about at 12,000 rpm. The disc will cut the timber as it cuts the film.

Related pages

100 mm versus 115 mm

Rasp disc

Wood carving disc buying guide: diameter, bore, rpm

How to use a wood carving disc on an angle grinder

Chainsaw disc vs rasp disc: UK angle grinder safety

Sources

Sources taken from the research digest. Prices, stars and review counts are the amazon.co.uk listing figures as of 20 October 2026.

  1. GOV.UK PSA2 — angle grinder chainsaw disc (retrieved 20.10.2026)
  2. GOV.UK PSA5 — toothed saw blade attachments (retrieved 20.10.2026)
  3. HSE — PUWER overview (retrieved 20.10.2026)
  4. HSE — HSG17 abrasive wheels (retrieved 20.10.2026)
  5. Rutlands — carving discs set of 2 (retrieved 20.10.2026)
  6. Rutlands — carving discs and rasps set of 6 (retrieved 20.10.2026)